jenshb Posted July 26, 2019 Share Posted July 26, 2019 Just caught up with the FB-111 thread - good stuff! Enjoy your vacation. Quote Link to post Share on other sites
Lucio Martino Posted July 26, 2019 Share Posted July 26, 2019 4 hours ago, Stefan buysse said: Hi, That's good news. Is it just the FB-111A, or are they re-releasing the other models as well? Cheers, Stefan. Other models as well. First one to be re-released was the EF-111A. Quote Link to post Share on other sites
Stefan buysse Posted July 26, 2019 Share Posted July 26, 2019 7 hours ago, Lucio Martino said: Other models as well. First one to be re-released was the EF-111A. Thanks, Lucio. I look forward to these and hopefully a couple of Caracal sheets. I have an F-model in the stash, but no decals that I'd want to use such a rare kit. Cheers, Stefan. Quote Link to post Share on other sites
viking73 Posted July 28, 2019 Share Posted July 28, 2019 Since the 1/144 Roden Convair CV-340 is now out (or about to be out), how about some spiffy ANG C-131B/D decals? I have a good number of high-res photos to share if you need/want them for reference 🙂 -Derek Quote Link to post Share on other sites
KursadA Posted July 28, 2019 Share Posted July 28, 2019 1 hour ago, viking73 said: Since the 1/144 Roden Convair CV-340 is now out (or about to be out), how about some spiffy ANG C-131B/D decals? I have a good number of high-res photos to share if you need/want them for reference 🙂 Already on the drawing table - one of the first things to work on when I am back in the good old Lone Star State in a few days. Quote Link to post Share on other sites
Scooby Posted July 28, 2019 Share Posted July 28, 2019 1/48 P-38 F/G decals, the market is slim for current decals. I know WWII isn’t normally your realm but it would be nice to see. Quote Link to post Share on other sites
Lucio Martino Posted July 28, 2019 Share Posted July 28, 2019 25 minutes ago, KursadA said: Already on the drawing table - one of the first things to work on when I am back in the good old Lone Star State in a few days. Sir, Let me say this again: We need you to downsize to 1:72 your FB-111 sheet. Quote Link to post Share on other sites
KursadA Posted July 28, 2019 Share Posted July 28, 2019 28 minutes ago, Lucio Martino said: Sir, Let me say this again: We need you to downsize to 1:72 your FB-111 sheet. Agreed - I will definitely scale these down to 1/72 in the next couple of months. Quote Link to post Share on other sites
achterkirch Posted July 28, 2019 Share Posted July 28, 2019 9 minutes ago, KursadA said: Agreed - I will definitely scale these down to 1/72 in the next couple of months. Hasegawa is going to reissue their F-111G kit here some time and you can build a FB-111A from it so that would be some great timing! Quote Link to post Share on other sites
viking73 Posted July 29, 2019 Share Posted July 29, 2019 5 hours ago, KursadA said: Already on the drawing table - one of the first things to work on when I am back in the good old Lone Star State in a few days. Thats awesome Kursad. Thanks! Can I send you the ANG photos I have? They are high-res from color 35mm slides. -Derek Quote Link to post Share on other sites
Trojan Thunder Posted July 29, 2019 Share Posted July 29, 2019 (edited) 6 hours ago, achterkirch said: Hasegawa is going to reissue their F-111G kit here some time and you can build a FB-111A from it so that would be some great timing! The F-111G (RAAF Markings) kit is due in September this year. Edited July 29, 2019 by Trojan Thunder Quote Link to post Share on other sites
Dutch Posted July 29, 2019 Share Posted July 29, 2019 (edited) I would like to see SAC SIOP FB-111A decals in 1/72 (& 1/48, why not?). The 9th BS at Carswell breifly flew the FB-111A as a training platform before and during the intial deliveries to the 380th & 509th BW(M) at Plattsburgh & Pease respectively. Edited July 29, 2019 by Dutch Quote Link to post Share on other sites
Charlie D. Posted July 30, 2019 Share Posted July 30, 2019 (edited) On 7/28/2019 at 12:29 PM, KursadA said: Already on the drawing table - one of the first things to work on when I am back in the good old Lone Star State in a few days. Hopefully at least on of these schemes http://www.airteamimages.com/convair-c-131-samaritan_53-7811_usa---us-air-force_196875.html Edited July 30, 2019 by Charlie D. Quote Link to post Share on other sites
AD-4N Posted July 31, 2019 Share Posted July 31, 2019 Plus One on the C-131. Quote Link to post Share on other sites
Drifterdon Posted August 2, 2019 Share Posted August 2, 2019 On 7/31/2019 at 4:26 PM, AD-4N said: Plus One on the C-131. +2 Quote Link to post Share on other sites
82Whitey51 Posted August 5, 2019 Share Posted August 5, 2019 (edited) 1/48 C-130s?? 🤷♂️...in "hi viz...USN, USMC, USAF 70s/80s. I only suggest this because after recently completing the Italeri 1/48 DC-130, finding decals for it in the hi viz scheme (Warning/Caution, Data etc.) was a huge pain! There are lots of Italeri/Testors 1/48 C-130 kits out there in folk's stashes but the ability to do a 70s/80s USN or USMC, USAF (hi viz type like the "Weather chasers" or "MATS) or even the markings for what is shown on the box, is virtually non existent. The decals in these kits were horrible to begin with; poor print quality, colors that were off, and a dull, thick finish to them that made silvering a guarantee. Add in the age factor and forget it! The sheet in my DC-130 kit was in great shape (that's not them shown above!) but even laying them down on a Gloss Gull Gray surface they were just not usable...I had to resort to using stencil data from an Australian decal maker, "Novascale". They weren't much better, and are ALPS printed...huge suck factor. I used the "star and bar" from the Caracal "Blue Angels Fat Albert" as they are they only game in town for the proper size National insignia for a C-130. Edited August 5, 2019 by 82Whitey51 Quote Link to post Share on other sites
KursadA Posted August 5, 2019 Share Posted August 5, 2019 16 minutes ago, 82Whitey51 said: 1/48 C-130s?? 🤷♂️...in "hi viz...USN, USMC, USAF 70s/80s. I only suggest this because after recently completing the Italeri 1/48 DC-130, finding decals for it in the hi viz scheme (Warning/Caution, Data etc.) was a huge pain! There are lots of Italeri/Testors 1/48 C-130 kits out there in folk's stashes but the ability to do a 70s/80s USN or USMC, USAF (hi viz type like the "Weather chasers" or "MATS) or even the markings for what is shown on the box, is virtually non existent. The decals in these kits were horrible to begin with; poor print quality, colors that were off, and a dull, thick finish to them that made silvering a guarantee. Add in the age factor and forget it! I completely agree that a 1970s/1980s C-130 sheet is much needed - I have been collecting refs for a while and will probably address this in the 2020 schedule. Quote Link to post Share on other sites
82Whitey51 Posted August 5, 2019 Share Posted August 5, 2019 15 hours ago, KursadA said: I completely agree that a 1970s/1980s C-130 sheet is much needed - I have been collecting refs for a while and will probably address this in the 2020 schedule. Nice to hear! Quote Link to post Share on other sites
Gary F Posted August 22, 2019 Share Posted August 22, 2019 VQ-3 markings for the -130 would be nice! How about a SAAF sheet dedicated to the Kinetic Mirage III kits .... various EZ, DZ, RZ versions and schemes. Quote Link to post Share on other sites
thegoodsgt Posted August 23, 2019 Share Posted August 23, 2019 On 8/4/2019 at 8:57 PM, KursadA said: I completely agree that a 1970s/1980s C-130 sheet is much needed - I have been collecting refs for a while and will probably address this in the 2020 schedule. In 1/144 scale, please! Quote Link to post Share on other sites
Dutch Posted August 23, 2019 Share Posted August 23, 2019 (edited) Yes, USMC hi-viz & lo-viz (TPS) Hercules markings would be most welcome in 1/72 and 1/144, especially KC-130T-30 164597 of VMGR-452 (tail code NY). Edited August 23, 2019 by Dutch Quote Link to post Share on other sites
Drifterdon Posted August 23, 2019 Share Posted August 23, 2019 On 8/4/2019 at 6:57 PM, KursadA said: I completely agree that a 1970s/1980s C-130 sheet is much needed - I have been collecting refs for a while and will probably address this in the 2020 schedule. 7 hours ago, thegoodsgt said: In 1/144 scale, please! +1 Quote Link to post Share on other sites
Paul Boyer Posted August 23, 2019 Share Posted August 23, 2019 Here's something that's missing: Actual trainer unit markings for the TA-4J Skyhawk. There are decal sheets that come in the kits and other aftermarket companies that give adversary or special commemorative markings, but I don't remember seeing the standard orange-on-white training outfits on any 1/72 scale decals. Quote Link to post Share on other sites
Dutch Posted August 23, 2019 Share Posted August 23, 2019 Paul is right, you know! Quote Link to post Share on other sites
tony.t Posted August 24, 2019 Share Posted August 24, 2019 (edited) On 26 July 2019 at 2:54 PM, Lucio Martino said: Other models as well. First one to be re-released was the EF-111A. The big H still has stacks of the over-printed Dick Ward 1/72 Project Warrior Raven sheet, depicting all of the art worn by Upper Heyford EF-111As in 1987-1988, priced at £2 each. I'm ordering a spare soon. What's really needed is 1/72 early F-111A/Es from Nellis and Upper Heyford ca.1969-76, with the NA-ND, JR-JT and UH codes. Somebody like Don Logan probably has a bunch of colour images showing necessary details such as crew names and NLG door zaps. Hasegawa seem to be popping out the whole range again, a bit at a time. Second choice is another early Eagle sheet with Holloman and striped Luke F-15A/Bs from around 1976-77. 1/72 again. Third choice would be 1/48 F-106A/Bs featuring the 87th FIS Red Bulls -or- maybe a reprint of 48-112. Just missed getting a set and I'm prolly not the only one. Tony Edited August 24, 2019 by tony.t changes Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.