SuperTomcat21 Posted February 21, 2021 Share Posted February 21, 2021 3 hours ago, Solo said: Few years ago I believed GWH's Su-35 is the next level in model enginering, talking about details and quality. Well, now we have Minibase and Su-33. And the cockpit made out of over 120 parts. And over 330 tiny parst on three small sprues (out of 15 in total plus many singled parts like missiles or inlets). I don't know. Have never seen such detailed, thoughtful and polished kit. I wish to know what about fitting issues (if there are any), but that kit is something spectacular. Thanks for such a high standard appreciation,But still need to have enough patience to complete the build. Quote Link to post Share on other sites
SuperTomcat21 Posted February 21, 2021 Share Posted February 21, 2021 7 hours ago, Mustang381 said: Just got mine...all I can say is that this is the best model kit in the world,EVER!!!! Just looks at those details,geometry...incredible!!! I have a lot model kits...and I mean A LOT!!! This is new benchmark.All I can say WOWWW...WOOOOOOO!!!!!Thank you Minibase! Ok, so Minibase what is next? 😉 WoW...Just Wooow!! Thx~What do you hope it will be? Quote Link to post Share on other sites
Solo Posted February 21, 2021 Share Posted February 21, 2021 One question: what are clear parts I6, I15 and I 16 for? I can't find anything about them in instruction manual, so why are they there? 10 minutes ago, SuperTomcat21 said: What do you hope it will be? Anything. Really, any next such detailed kit would be warm welcomed. Personally I wish to have something what is missing on the market: good Su-25 or A-10 kit. Or - seriously - new F-16, because althought Tamiya kits are almost perfect regarding surface and shape, but there is lack od details in cockpit or wheel bays. New F-16 from Minibase... it would be really big WOW. 🙂 Quote Link to post Share on other sites
Mustang381 Posted February 21, 2021 Share Posted February 21, 2021 (edited) 4 hours ago, SuperTomcat21 said: WoW...Just Wooow!! Thx~What do you hope it will be? Thank you for answer dear friend.I really mean that you just made perfect kit.I have buyed two boxes,because I would like to make my Su-33 in both variants with folded wing and ready for mission.And also to show standard,and modernized variant with SVP-24-33 system, it is very important that this aircraft it can be presented in it's first combat campaign.All I can say to you is BRAVO SIR!!!To you and to all team from Minibase. As of next what I would like to see is MiG-35...MiG-29KUB.And also very important Chinese jets,like J-8,J-7... series.Those Chinese aircrafts are very important for aircraft history and they deserve to be shown in better light. Edited February 21, 2021 by Mustang381 Quote Link to post Share on other sites
ijozic Posted February 21, 2021 Share Posted February 21, 2021 (edited) 16 hours ago, Solo said: Anything. Really, any next such detailed kit would be warm welcomed. Given the time it took them to finish this one, they could release some more Flanker variants. Since GWH did the regular single and dual seat Flankers, they could reuse the canard base and do Su-27M/35/37 and Su-30SM perhaps 🙂 Edited February 22, 2021 by ijozic Quote Link to post Share on other sites
Tapchan Posted February 21, 2021 Share Posted February 21, 2021 Su-33UB then 😄 Quote Link to post Share on other sites
ijozic Posted February 22, 2021 Share Posted February 22, 2021 9 hours ago, Tapchan said: Su-33UB then 😄 Good point, I forgot about the most logical option. Quote Link to post Share on other sites
paulsbrown Posted February 22, 2021 Share Posted February 22, 2021 17 hours ago, SuperTomcat21 said: Hi ijozic,From my friends Sharing ,You can try to do some tests with waste parts as follows. The operation is actually not difficult. First cut the decal into small pieces,Then paint Mr. Mark Setter on the light blue bathtub dashboard,Move the decal to the correct position,During the period, there will be some buttons to support the decals to form a small tent,Ignore them at this time,Wait till next day. When you think they are completely dry,Apply Mr. Mark Softer on the surface of the decal,Then use a soft flat pen to flatten gently to make it fit:) Nicely explained, I will be following your advice. Thanks for that. Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 Who can expain me why that pylon has raised panel lines? Maybe that Su-33 is not so fine. 🙂 Quote Link to post Share on other sites
Tapchan Posted February 22, 2021 Share Posted February 22, 2021 (edited) Research should precede tears 😄 Edited February 22, 2021 by Tapchan Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 (edited) It is always better to look carefully on the picture before you write something. The real pylon has got raised lines on front part and recessed at the end. Minibase pylon has exactly opposite. Edited February 22, 2021 by Solo Quote Link to post Share on other sites
Tapchan Posted February 22, 2021 Share Posted February 22, 2021 Where are those recessed lines on the back and raised on the front? Both pictures confirm what Minibase did. Quote Link to post Share on other sites
Piker38 Posted February 22, 2021 Share Posted February 22, 2021 Just now, Tapchan said: Where are those recessed lines on the back and raised on the front? Both pictures confirm what Minibase did. Yep ! A bit over-prominent, but correct. Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 Don't think so. Quote Link to post Share on other sites
Tapchan Posted February 22, 2021 Share Posted February 22, 2021 Yup, it's raised, same weld as on the front. Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 (edited) ---> Edited February 22, 2021 by Solo Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 16 minutes ago, Piker38 said: Yep ! A bit over-prominent, but correct. But it looks very strange. It should'n be raised panel lines, but just metal joint. Quote Link to post Share on other sites
Tapchan Posted February 22, 2021 Share Posted February 22, 2021 Lol, this is the same weld but in different lightning conditions. On the front is is lightened directly by the sun so shadow is on the bottom/left, the back part of pylon is lightened by snow reflection as it is in the wing shadow, that's why line shadow is inverted 😄 Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 What? Quote Link to post Share on other sites
Tapchan Posted February 22, 2021 Share Posted February 22, 2021 Don't have time to draw an explanation for you. So where's the recessed panel line? Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 On the Minibase pylon. Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 (edited) One question to @SuperTomcat21: why did you make two windshield? I know the two canopies are for their different positions, but what about two windshields? Edited February 22, 2021 by Solo Quote Link to post Share on other sites
SuperTomcat21 Posted February 22, 2021 Share Posted February 22, 2021 (edited) 47 minutes ago, Solo said: What? Hi Solo,The low-resolution photos may make you misjudge your observations,Please check the photo below,Thank you Mr. Vladimir Nazarov for providing high resolution photos to the design team. Edited February 22, 2021 by SuperTomcat21 Quote Link to post Share on other sites
Solo Posted February 22, 2021 Share Posted February 22, 2021 Ok, but what about my 2 questions regarding clear parts? Please let me know something about it. 🙂 Quote Link to post Share on other sites
SuperTomcat21 Posted February 22, 2021 Share Posted February 22, 2021 19 minutes ago, Solo said: Ok, but what about my 2 questions regarding clear parts? Please let me know something about it. 🙂 It is set up to correspond to the open or closed state,After constant modification, it also played a backup role. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.