Zactoman Posted January 13, 2018 Share Posted January 13, 2018 1 hour ago, madmanrick said: I am sympathetic to those members of our community that may have had their intellectual property stolen, mis-appropriated or otherwise hi-jacked, but the fact is that it is clear that there are forums for that sort of thing and it usually involves a judge, court or some other legal entity. This type of "forum" will never result in any agreement between the parties and it only is salacious "gossip" here. The unfortunate reality is that the small guy usually doesn't have the money or the means to legally challenge when they have been wronged, especially when it involves overseas dealings. I may never the whole truth behind what went down, but I do know that I (and others) was wronged and felt the need to share it with my fellow modelers. 9 hours ago, TXCajun said: I'm just trying to dig around to figure out if the new tool OV-10 will ever materialize. I will be receiving test shots soon and resurrecting the Bronco thread when I get them. Quote Link to post Share on other sites
madmanrick Posted January 13, 2018 Share Posted January 13, 2018 2 hours ago, Zactoman said: The unfortunate reality is that the small guy usually doesn't have the money or the means to legally challenge when they have been wronged, especially when it involves overseas dealings. I may never the whole truth behind what went down, but I do know that I (and others) was wronged and felt the need to share it with my fellow modelers. I understand what your intent is and believe me, if I were in your shoes, I would be plenty pissed too. However, when it comes to these flame wars, usually everybody comes away looking "bad," fair or not. It is sad that there are people in this world that can't do what you and others can, so they think it a viable alternative to just take what never was or never will be theirs. But, I am a firm believer that the cream always rises and that someone with your talents, will come out on top in the end. I can assure you that if you produce anything in my chosen scale (48th), I will support you 100% (I am waiting the Bronco with bated breath btw). Just as I have the other cottage industries, that produce wonderful products. Quote Link to post Share on other sites
DIO Posted May 26, 2018 Share Posted May 26, 2018 On 1/13/2018 at 3:05 PM, madmanrick said: I understand what your intent is and believe me, if I were in your shoes, I would be plenty pissed too. However, when it comes to these flame wars, usually everybody comes away looking "bad," fair or not. It is sad that there are people in this world that can't do what you and others can, so they think it a viable alternative to just take what never was or never will be theirs. But, I am a firm believer that the cream always rises and that someone with your talents, will come out on top in the end. I can assure you that if you produce anything in my chosen scale (48th), I will support you 100% (I am waiting the Bronco with bated breath btw). Just as I have the other cottage industries, that produce wonderful products. WORD! Quote Link to post Share on other sites
Doppelgänger Posted May 30, 2018 Share Posted May 30, 2018 Is this project still alive? Any estimate with regard to the releasement date - or even new shots about its progress? Quote Link to post Share on other sites
nicholassagan Posted May 30, 2018 Share Posted May 30, 2018 1 minute ago, Doppelgänger said: Is this project still alive? Any estimate with regard to the releasement date - or even new shots about its progress? It became the Kinetic kit. Quote Link to post Share on other sites
Doppelgänger Posted May 30, 2018 Share Posted May 30, 2018 5 minutes ago, nicholassagan said: It became the Kinetic kit. What??? Again? Thought there was a V2.0 with respect to the Kinetic kit... Quote Link to post Share on other sites
Laurent Posted May 30, 2018 Share Posted May 30, 2018 31 minutes ago, nicholassagan said: It became the Kinetic kit. Er no. V1.0 was released by Kinetic but AFAIK the company who's supposed to release V2.0 is still unknown and there have been no updates for several months. Quote Link to post Share on other sites
B.Sin Posted May 30, 2018 Share Posted May 30, 2018 Maybe GWH will do it. Quote Link to post Share on other sites
Berkut Posted June 10, 2018 Share Posted June 10, 2018 Hopefully they will soon officially announce and show pictures but just a teaser; The completed Su-33 v2.0 looks absolutely stunning. Never seen anything like it. Quote Link to post Share on other sites
B.Sin Posted June 10, 2018 Share Posted June 10, 2018 15 minutes ago, Berkut said: Hopefully they will soon officially announce and show pictures but just a teaser; The completed Su-33 v2.0 looks absolutely stunning. Never seen anything like it. Berkut, so you've seen test shots of the new version of the Su-33? Quote Link to post Share on other sites
Berkut Posted June 10, 2018 Share Posted June 10, 2018 (edited) There are no testshots yet. I have seen the final CAD, which is as i said absolutely stunning. Also, this is meant as a headsup that the project is progressing and that for fans of Soviet/Russian aviation, this is quite the release to look forward to. Edited June 10, 2018 by Berkut Quote Link to post Share on other sites
B.Sin Posted June 10, 2018 Share Posted June 10, 2018 6 minutes ago, Berkut said: There are no testshots yet. I have seen the final CAD, which is as i said absolutely stunning. Also, this is meant as a headsup that the project is progressing and that for fans of Soviet/Russian aviation, this is quite the release to look forward to. I see. Well, thank you Berkut.Yes, I am looking forward to this kit! I hope it's a big success so that they will bring us more kits of Soviet/ Russian aircraft. Quote Link to post Share on other sites
flybywire Posted June 10, 2018 Share Posted June 10, 2018 Briefly what's the difference between V1 & V2? Quote Link to post Share on other sites
Laurent Posted June 10, 2018 Share Posted June 10, 2018 3 hours ago, flybywire said: Briefly what's the difference between V1 & V2? You can read the first four pages of the topic. Quote Link to post Share on other sites
flybywire Posted June 11, 2018 Share Posted June 11, 2018 7 hours ago, Laurent said: You can read the first four pages of the topic. Got it. So v2 will be the corrected version of the errors committed on v1 of the kinetic kit. 😄 Quote Link to post Share on other sites
evilmedic13 Posted June 11, 2018 Share Posted June 11, 2018 16 hours ago, Berkut said: There are no testshots yet. I have seen the final CAD, which is as i said absolutely stunning. Also, this is meant as a headsup that the project is progressing and that for fans of Soviet/Russian aviation, this is quite the release to look forward to. High school was the last time someone teased me this hard. Sadly, it wasn't worth it then. I can only hope this one will be different. Luckily, I'm much olde,r and patient, now, than I was back then. 165+ kits in the stash definitely help on that end. Quote Link to post Share on other sites
stalal Posted June 11, 2018 Share Posted June 11, 2018 How different is it going to be from Kinetic Su-33? That kit is spectacular. Quote Link to post Share on other sites
B.Sin Posted June 11, 2018 Share Posted June 11, 2018 Berkut, Sorry to bother you again, do you know when they plan to start the tooling process? Brad Quote Link to post Share on other sites
Berkut Posted June 12, 2018 Share Posted June 12, 2018 21 hours ago, stalal said: How different is it going to be from Kinetic Su-33? That kit is spectacular. Aviation Art kit was/is good, but unpolished. There was a number of design and accuracy errors that weren't addressed for various reasons. Both of the most significant (along with other smaller ones) accuracy issues in the AA kit is fixed in "v2.0". 20 hours ago, B.Sin said: Berkut, Sorry to bother you again, do you know when they plan to start the tooling process? Brad I do, but i dont feel comfortable sharing that information. Stay tuned, hopefully something official will drop soon enough. 🙂 Quote Link to post Share on other sites
Doppelgänger Posted June 12, 2018 Share Posted June 12, 2018 Wow, this is very good news! I've got the Kinetic kit published, and had put it on hold because I took it that the V2.0 project was kaput What I suffered the most about the V1.0 project was the lack of a round profile on the sides of the forward fuselage area - and the cockpit floor is so shallow the seat looks ridiculous on it. Publication resumed once again... Quote Link to post Share on other sites
Berkut Posted June 12, 2018 Share Posted June 12, 2018 21 minutes ago, Doppelgänger said: Wow, this is very good news! I've got the Kinetic kit published, and had put it on hold because I took it that the V2.0 project was kaput What I suffered the most about the V1.0 project was the lack of a round profile on the sides of the forward fuselage area - and the cockpit floor is so shallow the seat looks ridiculous on it. Publication resumed once again... Both of these issues are fixed indeed. Quote Link to post Share on other sites
Brian P: Fightertown Decals Posted June 13, 2018 Share Posted June 13, 2018 (edited) deleted... -brian Edited June 13, 2018 by Brian P: Fightertown Decals Quote Link to post Share on other sites
Nino_Belov Posted July 16, 2018 Share Posted July 16, 2018 (edited) . Edited August 13, 2020 by Nino_Belov Quote Link to post Share on other sites
madcop Posted July 21, 2018 Share Posted July 21, 2018 On 7/17/2018 at 12:22 AM, Nino_Belov said: Please,please update us with this project.I wait so long for it.I watched so long carefuly for this subject but I hasitate to talk on forum for it,because I didn't know what to ask.But now please just tell us aprox time when we can expect it because I have sold my Kinetic model kit and I wait for this model.I think about it all the time.Will it cam out at all.Where is those guys from the project? What is going on with it? Will it have that SVP-24-33, so that we can build this model kit from Syrian campaign? Any info is welcome. All the best. Hi Nino You shouldn't have sold the bear's fur before having shot him ! It's just more than 1 year since I paid for the F-14D from AMK, and I am still waiting and confident…. I am also confident for thisSu-33, and I will have the same patience… there is so much to do in life than kits. It remains a hobby !. Madcop Quote Link to post Share on other sites
Nino_Belov Posted July 21, 2018 Share Posted July 21, 2018 (edited) On 7/21/2018 at 11:25 PM, madcop said: Hi Nino You shouldn't have sold the bear's fur before having shot him ! It's just more than 1 year since I paid for the F-14D from AMK, and I am still waiting and confident…. I am also confident for thisSu-33, and I will have the same patience… there is so much to do in life than kits. It remains a hobby !. Madcop . Edited August 13, 2020 by Nino_Belov Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.