Collin Posted January 1, 2018 Share Posted January 1, 2018 Still searching for the best acrylic paint thinner. Cheers Collin Quote Link to post Share on other sites
Bob Beary Posted January 1, 2018 Share Posted January 1, 2018 (edited) Tamiya X-20A, Tamiya lacquer thinner (yellow cap), IPA, and the best...Mr Color Leveling Thinner. At least for the Tamiya line of paints. Edited January 2, 2018 by Bob Beary clarification Quote Link to post Share on other sites
Joel_W Posted January 1, 2018 Share Posted January 1, 2018 3 hours ago, Bob Beary said: Tamiya X-20A, Tamiya lacquer thinner (yellow cap), IPA, and the best...Mr Color Leveling Thinner. Bob, I completely agree. I just keep on forgetting to order more Mr. C. Leveling thinner. I can get Yellow cap locally, so it's usually what I use these days. Joel Quote Link to post Share on other sites
Mr Matt Foley Posted January 1, 2018 Share Posted January 1, 2018 6 hours ago, Collin said: Still searching for the best acrylic paint thinner. Cheers Collin Depends on the brand of paint. What are your go to brands? Some brands will not react favorably to a Lacquer thinner (can make pudding out of the paint). Quote Link to post Share on other sites
86Sabreboy1 Posted January 7, 2018 Share Posted January 7, 2018 Tamiya paint isn't really an acrylic paint. They call it an acrylic and do so because it's not produced in the United States but it's really a cellulose based alcohol paint. In my opinion I've found 91% isopropyl alcohol works just as well as Tamiya's more expensive X-20 thinner. I use it on my models as well as for thinning and cleaning for my students when I conduct workshops. It's very stable and forgiving, I've not had a student ever have a problem with it. Quote Link to post Share on other sites
Mr Matt Foley Posted January 7, 2018 Share Posted January 7, 2018 (edited) 6 hours ago, 86Sabreboy1 said: Tamiya paint isn't really an acrylic paint. They call it an acrylic and do so because it's not produced in the United States but it's really a cellulose based alcohol paint. In my opinion I've found 91% isopropyl alcohol works just as well as Tamiya's more expensive X-20 thinner. I use it on my models as well as for thinning and cleaning for my students when I conduct workshops. It's very stable and forgiving, I've not had a student ever have a problem with it. Been there and done that many years ago. I will always go back to Tamiya's Lacquer Thinner. It levels better and has better adhesion. What students do you teach? You work for Grex right? Edited January 7, 2018 by Mr Matt Foley Quote Link to post Share on other sites
86Sabreboy1 Posted January 7, 2018 Share Posted January 7, 2018 (edited) I've conducted workshops for up to 8 students where each student has their own work station and model aircraft to paint. I demonstrate then they follow through with the process. It's roughly a 4 hour course and the students get to keep their model. Usually tuition is $100 and we work in conjunction with one of our dealers who provides the space for the workshop to be conducted. My responsibilities for our company are always evolving and changing and in the last couple of years I've been pushing into new markets. With that said I've not been able to participate at too many model shows or been able to conduct a workshop. However, should the opportunity arise and schedule permits, I hope to conduct them again in the future. Edited January 7, 2018 by 86Sabreboy1 Quote Link to post Share on other sites
Joel_W Posted January 8, 2018 Share Posted January 8, 2018 19 hours ago, Mr Matt Foley said: Been there and done that many years ago. I will always go back to Tamiya's Lacquer Thinner. It levels better and has better adhesion. What students do you teach? You work for Grex right? Agreed, Yellow cap works even better then X20-A. I save the X20-A for thinning Mig Ammo paints Joel Quote Link to post Share on other sites
86Sabreboy1 Posted January 8, 2018 Share Posted January 8, 2018 21 hours ago, Mr Matt Foley said: Been there and done that many years ago. I will always go back to Tamiya's Lacquer Thinner. It levels better and has better adhesion. What students do you teach? You work for Grex right? Sorry, I didn't answer the second part of your question. Yes, I work for Grex. Quote Link to post Share on other sites
a4s4eva Posted January 9, 2018 Share Posted January 9, 2018 Mr Color thinners (all sorts) are my choice. But to be honest I've found cheap lacquer thinners works just as well as Mr Color thinners for Tamiya and Mr Hobby paints. I used to use IPA for Tamiya paints but found it gave a rougher finish to the paint than a lacquer thinner Quote Link to post Share on other sites
86Sabreboy1 Posted January 9, 2018 Share Posted January 9, 2018 8 minutes ago, a4s4eva said: Mr Color thinners (all sorts) are my choice. But to be honest I've found cheap lacquer thinners works just as well as Mr Color thinners for Tamiya and Mr Hobby paints. I used to use IPA for Tamiya paints but found it gave a rougher finish to the paint than a lacquer thinner I gloss coat my models before addressing decals and found the slight roughness to be a non issue. Quote Link to post Share on other sites
Joel_W Posted January 9, 2018 Share Posted January 9, 2018 The hobby Lacquer Thinners aren't as hot as the store generic brands. X20-A and ISO Alcohol don't break down the paint pigments to as fine of particles as the hobby LTs do, hence the rougher surface texture to the paint finish. Joel Quote Link to post Share on other sites
a4s4eva Posted January 13, 2018 Share Posted January 13, 2018 On 1/10/2018 at 8:03 AM, 86Sabreboy1 said: I gloss coat my models before addressing decals and found the slight roughness to be a non issue. So do I, but the roughness either needed to be knocked down with mircromesh or a thicker gloss coat. l found lacquer thinners works so much better and is cheaper so it's win win Quote Link to post Share on other sites
ElectroSoldier Posted January 17, 2018 Share Posted January 17, 2018 I use Citadel Air Caste thiner. works with all the usual acrylic paints like Citadel, Coat d'arms etc etc. Quote Link to post Share on other sites
Mike C Posted January 19, 2018 Share Posted January 19, 2018 I wouldn't use nail polish remover to thin Tamiya acrylic paints. Tried that, didn't work that well. Personally, I used methylated spirit (a.k.a. denatured alcohol), or Tamiya's own X-20A thinner. These also work perfectly to thin Gunze Aqueous Hobby range. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.