Jump to content
ARC Discussion Forums
K2Pete

1/72 Shuttle and Hubble Space Telescope

Recommended Posts

Posted (edited)

Friend's this is the main reason why I avoid forums theses days. Always you find a "wise guy", I think that this is the correct political expresion here in North America .  Sorry but in"latino america" we use other expressions. This type of people always knows everything of everything, they do the talk, but they never do the walk.  Experts in theories but that all....

 

En el futuro muy cercano el español

sera la segunda lengua en USA. I don't know how popular is in Texas now.

 

I hope that my last post was understand by some of you.  Sorry but my English is not perfect.

 

Keep talking in cyberspace 

 

Ricardo

 

 

 

Edited by Ricardo Salamé

Share this post


Link to post
Share on other sites

umm....I think you totally misread what  slartibartfast was saying. I don't think he was trying to be wiseguy. He just noted that it looked like autocorrect made a humorous mistake in your post. It was completely harmless from what I can tell. Noone is picking on you.

 

Bill

Share this post


Link to post
Share on other sites
Posted (edited)

Bill, thanks for your comment. But I prefer to direct the conversation on  the scale modeling topic and the new amazing project that Pete is creating.

 

Gracias y Saludos

 

Ricardo 

Edited by Ricardo Salamé

Share this post


Link to post
Share on other sites

Oh dear ... Ricardo, I see your point, but I agree with Bill and Slartibartfast ... his comments were not directed at you personally. Please don't let a comment like that prevent you from posting on this forum. 

 

Myself, I value your critical comments on my builds ... the main reason I post my build progress is to take advantage of all your various observations and knowledge and for me to make more accurate models ... not perfect mind you, just a little more accurate!

 😉

... okay ... back to the build ...

 

So, the Ku Band antennae, I slimmed down the edge of the dish of my scratch built version but I shall use Real Space Models resin version on my shuttle. It's a little more accurate.

 

2v2JVeW95xAnAAS.jpg

 

 

The tweezers are pointing to a notch that shows the Rad panel is in the wrong position. So I used a little CA de-bonder to remove two panels and re-position 'em. This notch should be on the end of the door.

 

2v2JVeWezxAnAAS.jpg

 

2v2JVeWuNxAnAAS.jpg

 

 

This is Real Space Models' PE that I've had for over 15 years. It's the Payload Bay upgrade kit. I'll use his Handholds for the PB doors. You can see I've used some items previously.

 

2v2JVeWaMxAnAAS.jpg

 

 

The little nubs on the PE need to be filed down ...

 

2v2JVeWJrxAnAAS.jpg

 

 

My alignment jig is really basic, just some thick styrene scrap and some tape ...

 

2v2JVeWH8xAnAAS.jpg

 

 

... and almost done. The handholds will get painted with Yellow Model Master enamel and then a little First-Aid tape will be applied between the Handholds.

 

2v2JVeWEjxAnAAS.jpg

 

Thanx for looking in, gents

Pete

Share this post


Link to post
Share on other sites

Hi Pete I update my Atlantis pictures folder in Flirck I hope this helps you

https://flic.kr/s/aHskAeoPfi  Sorry no good picture of the KU antenna. I have other pictures if you are looking for others detail. The antenna It's really looking better with the thinned edeges!

 

Look at this detail of the airlook ring that it surprise me and change my preconceptions 

Space Shuttle Atlantis  OV‑104

 

See the wrinkle. It's not metal.

Thanks for posting your progress 

 

Ricardo 

 

Share this post


Link to post
Share on other sites

Hi Ricardo,

what an awesome photo collection, smiley250.gif with lots of fantastic details.  cant-believe-my-eyes-smiley-emoticon.gif

 

Share this post


Link to post
Share on other sites

Awesome photos Ricardo - I've bookmarked it for future reference!

 

-ret

Share this post


Link to post
Share on other sites

I went to see Atlantis in April, it was AWESOME !!!  Got to see a Falcon 9 launch while I was there.

 

I also took tons of pics but haven’t uploaded them. 

Share this post


Link to post
Share on other sites

... and you didn't let us know?? ... and you didn't share your pix? ... Aw-w-w habu2, doncha love us anymore???   😉

 

Just a smallish update ... this fixture attaches to the bottom of the HST

 

2v2JVyiTGxAnAAS.jpg

 

 

As seen here ...

 

2v2JVyk5FxAnAAS.jpg

 

 

... my version. This HST was built as one of my first scratch builds and I'm quite surprised with it, pleasantly!

 

2v2JVyiPVxAnAAS.jpg

 

2v2JVyiAhxAnAAS.jpg

Plus I've been adding little details, here little triangles of styrene to represent a little structure on the PB sill. Looks like I need to adjust a few of 'em  😊

2v2JVyisSxAnAAS.jpg

 

Thanx for taking a peek!

Pete

 

Share this post


Link to post
Share on other sites

Coming along great Pete. I still wish I had your scratchbuild skill set. It's always so clean looking on your builds.

 

Bill

Share this post


Link to post
Share on other sites

I'm doing a lot of little details ... like this. The RMS's End Effector had a large air bubble in the joint. 

So I made a disk, by gluing in a series of styrene tubes, cutting it and sanding it and attaching it.

 

2v2Jh4CQCxAnAAS.jpg

 

2v2Jh4CKgxAnAAS.jpg

 

 

... wet sanding the disk 

 

2v2Jh4CAdxAnAAS.jpg

 

 

... fitting the disk

 

2v2Jh4CBCxAnAAS.jpg

 

 

... and gluing it on. It'll attach to the subassembly in the background.

 

2v2Jh4CbLxAnAAS.jpg

 

 

... the OBSS. You can see Ricardo's image in the background. Thanx Ricardo!

 

2v2Jh4C1WxAnAAS.jpg

 

 

... detailing the RMS shoulder. The diagonal looking rod is the hinge pin and it's just there for dry fitting purposes.

 

2v2Jh4CfFxAnAAS.jpg

 

 

The Orbiter's belly needs some attention too. I scraped out some of the 20 year old putty and will fill the gaps with styrene scraps.

 

2v2Jh4CcnxAnAAS.jpg

 

 

... to be sanded ... and filled ... and sanded some more!

 

2v2Jh4CpGxAnAAS.jpg

 

There's still a long way to go on this, but it is coming along nicely!

Pete

Share this post


Link to post
Share on other sites

Hi Pete,

 

where wood is chopped, splinters must fall ... speak_cool.gif

 

Keep on sanding ... up040577.gif

Share this post


Link to post
Share on other sites
Posted (edited)

So true Manfred ... so true.

 

And for the last few days, all I've been doing is sanding and filling ...

 

2v2JLYggzxAnAAS.jpg

 

First coat of primer and while it looks good, there are still a few small divots ... I also want to get rid of that subtle ridge down the belly ... the belly of this beast!

2v2JLYgSNxAnAAS.jpg

 

After this sanding there are still a couple spots that are not responding to my sanding. When DutyCat was doing his Shuttle Wars videos, and he took out his power sander to sand down the Shuttle Belly, I thought, at the time, it was a bit of overkill. But this frustrating process is just wasting time, which fortunately, I have a lot of!  :rolleyes:

 

2v2JLYgG2xAnAAS.jpg

 

 

When it comes time to add surface texture to the Orbiter, I'll use First Aid Tape. Here's the 2 textures I'll use ... the one on the left will get doubled up in thickness to be a little more opaque and add a little scale thickness.

 

2v2JLYgqvxAnAAS.jpg

 

 

... and doubled up

 

2v2JLYgn3xAnAAS.jpg

 

There's just a little construction left to do, but it will be consuming some time ... I also ordered some orange foil from Amazon and it should be here in a couple of weeks.

 

Till then ... thanx for looking in!

Pete

Edited by K2Pete

Share this post


Link to post
Share on other sites

Hi Pete. Out standing job on your payload sir. Haven't seen any updates in a while and was hoping you had more photo's of you masterpiece. Am hoping to copy what you have done and add it to my new shuttle I started to work on. Like your self I am downloading the AXM paper payload bay of this and enlarge it, that is as soon as i figure out how much to increase the size to. Thanks for the outstanding work and hope to see you work in the future. Gary

Edited by garyshipwright

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×