Hooker169 Posted July 24, 2018 Share Posted July 24, 2018 (edited) This is the Hobbyboss FB-111A with Caracal 'Dark Vark' sheet. It's basically OOB with the exception of Squadron vacuform canopy and B-83's from Belcher bits 'modern Nukes' set. I also exchanged external tanks for two Revell A-10 tanks and acquired two SRAM's from several generous ARCers, (thanks again, boys!) The kit windscreen is probably the most glaring problem so I added the vacuform canopy designed for the Academy kit. The windscreen needed to be faired in and blended over the course of several days but well worth the effort as it completely changes the look of the kit. Other challenges included the bomb bay doors are completely wrong so check references. I was able to split the doors down the panel line to get them opened properly. The angle is still off a bit which looks like they are blocking the weapons from releasing freely but it was as good as I could get them without ruining the profile view of the doors. Also, I used the kit decals for the cockpit and I wish I hadn't. I should have dry brushed and picked out dials and screens like normal but I figured Id try them. It just looks too toyish I think. I did add the blast curtains and grimes lights/map lights and outer canopy handles which turned out ok. It's certainly not perfect and I feel small things could have been done better but all in all I'm happy with the outcome and represents well the aircraft I'd see fly over all the time when I was a kid. FYI, since photographing the model I have moved the UHF antenna on the nose to the correct position near the tail skid and also removed the pilots side pitot tube. Edited August 6, 2018 by Hooker169 Added pics w/ white background Quote Link to post Share on other sites
A-10 LOADER Posted July 24, 2018 Share Posted July 24, 2018 Despite all your difficulties, I'd say she turned out well. I agree with you about the cockpit however. Steve Quote Link to post Share on other sites
jefropas Posted July 24, 2018 Share Posted July 24, 2018 Love the Dark Dark!! Jeff Quote Link to post Share on other sites
Geoff M Posted July 24, 2018 Share Posted July 24, 2018 I have this one in the stash and just ordered the Caracal decals a couple days ago. Hope mine turns out this good. Geoff M Quote Link to post Share on other sites
Peterpools Posted July 24, 2018 Share Posted July 24, 2018 Super wok on the FB-111A. The extra effort and corrections are big plus and look mighty good Peter Quote Link to post Share on other sites
Aigore Posted July 25, 2018 Share Posted July 25, 2018 A big vaark is always nice, a nuke vaark is gorgeous 😄 Quote Link to post Share on other sites
Mstor Posted July 25, 2018 Share Posted July 25, 2018 Real nice. I've been considering getting a vacuum formed canopy for mine. Looks like it worked out very nice and sure improves to look of the model. Any tips on tackling the vacuum formed canopy? Quote Link to post Share on other sites
Hooker169 Posted July 25, 2018 Author Share Posted July 25, 2018 3 hours ago, Mstor said: Real nice. I've been considering getting a vacuum formed canopy for mine. Looks like it worked out very nice and sure improves to look of the model. Any tips on tackling the vacuum formed canopy? Since it was designed for the Academy kit the windscreen portion (after separating it from the doors) is slightly narrow at the bottom. I added a strip of styrene on each side at the base and pushed down on the windscreen to get it to spread slightly then carefully CA glued it. Then masked and spend two sessions fairing in the canopy to fuselage. The other area of emphasis would be the bump leading up to the front of the windscreen. It has to be knocked down considerably with a sanding stick to maintain a nice aerodynamic flow from the nose up to the windscreen, shown below circled. The line is where I added the styrene strip to the inside of glare shield to spread the windscreen. Quote Link to post Share on other sites
Mstor Posted July 25, 2018 Share Posted July 25, 2018 (edited) Thanks for the info! I've order the vacuum formed canopies. Edited July 25, 2018 by Mstor Quote Link to post Share on other sites
R Spreckley Posted July 27, 2018 Share Posted July 27, 2018 Dwhat a beast Quote Link to post Share on other sites
skyhawk174 Posted July 30, 2018 Share Posted July 30, 2018 Wow looks great and your fixes sure look like they work. I have one of those kits and I think I will also pick up the vac canopy. Quote Link to post Share on other sites
aircommando130 Posted August 4, 2018 Share Posted August 4, 2018 That turned out real nice. Everybody says the kit is "unbuildable" but yours is another that shows that it can be built into a nice Aardvark. I have the HB F-111A and want to build it up as a early Edwards AFB test bird in gray over white. The squadron canopy does dress it up...I bought one for mine as well. Cheers...Ron Quote Link to post Share on other sites
Hooker169 Posted August 4, 2018 Author Share Posted August 4, 2018 1 hour ago, aircommando130 said: That turned out real nice. Everybody says the kit is "unbuildable" but yours is another that shows that it can be built into a nice Aardvark. I have the HB F-111A and want to build it up as a early Edwards AFB test bird in gray over white. The squadron canopy does dress it up...I bought one for mine as well. Cheers...Ron Thanks Ron, the windscreen fix was a must for me. It took a couple days of fitting, filling and sanding and more filling and sanding but it completely changes the look of the whole kit. Other less noticeable fixes which are needed are the TP II spike is too short, the main wheel rubber is slightly undersized for an FB (the hubs are pretty close though) and the bomb bay doors need fixing (I believe Mr. Vark has a fix posted on ARC somewhere) Oh, the fore flaps are tapered incorrectly also. But, I tend to agree, it’s far from being unbuildable but also far from shake n’ bake. Quote Link to post Share on other sites
Doppelgänger Posted August 5, 2018 Share Posted August 5, 2018 Very nice Vark build, Hooker! It seems you've helped the Squadron vac-form stock shares rise their price as of late! 21 hours ago, Hooker169 said: Oh, the fore flaps are tapered incorrectly also. How have you fixed this issue? Also, aren't the burner can rings wrong about having one opening missing? I thought one'd need to resort to Scaledown resin fixes. Thank you very much! Quote Link to post Share on other sites
Hooker169 Posted August 5, 2018 Author Share Posted August 5, 2018 (edited) 4 hours ago, Doppelgänger said: Very nice Vark build, Hooker! It seems you've helped the Squadron vac-form stock shares rise their price as of late! How have you fixed this issue? Also, aren't the burner can rings wrong about having one opening missing? I thought one'd need to resort to Scaledown resin fixes. Thank you very much! Thank you, Sir! Unfortunatly the canopy prices have gone up it seems. Although I found one on eBay for $5 last month so jump on them when you can. The fore flaps are fixable but it would’ve required more time than I was willing to invest. Basically you’d have to cut the flap tracks off (blue arrows), flip the fore flap around so the tappered end is outboard then reattach the flap tracks, then attach the main flaps. Below you can see how the fore flap is too wide at the tip, the wide end should be inboard not outboard which ultimately drops the outboard flaps way too much. As for the cans, Mr. Vark has an in-depth rundown of the various burner cans available. They essentially don’t exist on the HB kit, but if you have a creative imagination when looking up the tail pipes they are both wide open. One should be closed, similar to the F-14 on shutdown. Edited August 6, 2018 by Hooker169 added picture Quote Link to post Share on other sites
joeltc Posted August 6, 2018 Share Posted August 6, 2018 Nice work! Its good to see someone putting the extra effort into getting this kit to be a more accurate example of the F-111. Ive seen plenty do it with the Academy kit but not so much with this one. Though It still really highlights the gap in the market for a better kit of this iconic aircraft. Quote Link to post Share on other sites
B-ONE27 Posted August 7, 2018 Share Posted August 7, 2018 Very very nice final product with your FB-111A...she came out looking gorgeous!! Im inspired to build mine now..what paints did you use as Im partial to Tamiya. Quote Link to post Share on other sites
Hooker169 Posted August 8, 2018 Author Share Posted August 8, 2018 (edited) 20 hours ago, B-ONE27 said: Very very nice final product with your FB-111A...she came out looking gorgeous!! Im inspired to build mine now..what paints did you use as Im partial to Tamiya. Thanks Bone! Everything was Model Master enamels, then post shading, artist chalk wash and Future for decals. Testors Dullcoat was the final clear coat. Euro 1 gray, gunship gray and green drab, I actually stole the painting guide from the 1/72 Hasegawa FB kit as its the clearest I could find. Edited August 8, 2018 by Hooker169 Quote Link to post Share on other sites
Gator52 Posted September 20, 2018 Share Posted September 20, 2018 This turned out really nice; I just picked up the HB D/E kit and will reference your build. Jonah Quote Link to post Share on other sites
dnl42 Posted September 20, 2018 Share Posted September 20, 2018 Outstanding! Quote Link to post Share on other sites
Hooker169 Posted September 20, 2018 Author Share Posted September 20, 2018 Thanks Jonah and dnl42! I'm pretty happy with it over all. Quote Link to post Share on other sites
my favs are F`s Posted September 20, 2018 Share Posted September 20, 2018 Alrighty, since this is the place for critiques, i dont like the lack of weathering. Especially the nozzles and the landing gear look respectively black and white... Reminds me of some sort of the early builds when the model was ready after the first coat of paint 🙂 Of course, it looks definitely better than my first models, but i would weather it just a hint more, at least. Quote Link to post Share on other sites
Geoff M Posted September 20, 2018 Share Posted September 20, 2018 This is not the place for critiques. That would be the "Critique Corner". Geoff M Quote Link to post Share on other sites
Aigore Posted September 20, 2018 Share Posted September 20, 2018 On 8/5/2018 at 11:41 PM, Hooker169 said: Thank you, Sir! Unfortunatly the canopy prices have gone up it seems. Although I found one on eBay for $5 last month so jump on them when you can. The fore flaps are fixable but it would’ve required more time than I was willing to invest. Basically you’d have to cut the flap tracks off (blue arrows), flip the fore flap around so the tappered end is outboard then reattach the flap tracks, then attach the main flaps. Below you can see how the fore flap is too wide at the tip, the wide end should be inboard not outboard which ultimately drops the outboard flaps way too much. As for the cans, Mr. Vark has an in-depth rundown of the various burner cans available. They essentially don’t exist on the HB kit, but if you have a creative imagination when looking up the tail pipes they are both wide open. One should be closed, similar to the F-14 on shutdown. I used OzMods burner cans for my academy, way back, and coupled them with exhaust tunnels from a hasegawa Tomcat (same engine I figured) since the OzMod burner rings and tunnel didn't look as crisp as I wanted. Quote Link to post Share on other sites
my favs are F`s Posted September 21, 2018 Share Posted September 21, 2018 Geoff M, oups, i get that wrong. 😐 ... Sry sry. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.