Jump to content
ARC Discussion Forums
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt
11bee

Dark Blue Killer - Tamiya 1/32 F4U-1D Corsair

Recommended Posts

This is just spek-tak-yoo-lar ... the subtle paint chipping, the lovely paint ... just gorgeous!     :thumbsup:

 

... oh, and your pix are great too ... nice and clear ... we don't hafta strain to see your details!

Share this post


Link to post
Share on other sites

Wow! Is this Corsair ever looking NICE! Terrific work. 

Share this post


Link to post
Share on other sites

Looking fantastic!  I think you absolutely nailed the soot around the gun ports.   How did you do that (or did I miss it?).

 

Makes me want to start my Trumpeter -1D kit.

 

Looking forward to seeing this one finished!

 

-Derek  

Share this post


Link to post
Share on other sites

Thanks very much for the compliments guys, it's much appreciated.   Derek - I touched on the gunports in one of my recent updates but essentially, I used a mix of brown-ish grey paint, followed by brown pastels to replicate that mess.  Prior to that step, I used a few tiny bits of tan painted scotch tape to replicate the blasted packing tape used to seal the muzzle ports on the real thing.   Check out the color pic I posted of a Corsair being loaded with HVAR's, I tried to my best to replicate that look.   As mentioned, I'm removing some of the pastels, I do think I went a bit heavy.

 

One thing I forgot to mention in my last update -  I sprayed the top of the engine cowling with dullcoate.   Have no idea if My Nell had a painted flat blue anti-glare panel (as some -1D's did) or if it just weathered to a flat finish but the reference pics I've seen show this area looking pretty flat.   Previously, it was way too shiny.    May not be that apparent in the pics above but it's pretty noticeable in RL.  I'm very happy with the way it looks.   

Share this post


Link to post
Share on other sites

So, just to prove I haven't been totally sitting on my butt for the last three week, I figured I'd post a few pics to show my very limited progress.    I've been adding the hydraulic lines in the wing fold area.   I also added the kit's actuator linkage from the wingfold to the outer flap.  Kudo's to Tamiya, this area is incredibly complex and yet they seem to have replicated pretty much all the major bits, down to servicing placards.  They even provided the gun camera and landing light fixtures that are mounted within the outer wing.   Just as importantly, they designed everything in a manner that makes a very complex area fairly easy to build.  All I can add is to study the instructions closely and when in doubt, dry fit before gluing.   My modifications were pretty basic.  I drilled some small holes in the wingroot base for a couple of hydraulic lines (the remainder go through one of the lightning holes or just connect to one of the hydraulic actuators)  and added a total of 7 lines using small dia copper wire painted grey.  Note on colors - from the pics I've seen, these hydraulic lines came in multiple colors, including GSB.   I opted for a darkish grey just to add a bit of color vrs everything being dark blue.  There was also a larger dia (also made from copper wire) line in the aft section of the wing, this was painted flat black.   

 

I know I sound like a record here but Dana Bell's book has some very clear pics of this area that I found to be invaluable.   Regarding reference pictures - one word of caution -  I've noticed that if you are just googling pictures on the net, many of them are of restored warbirds.   Take these pictures with a big grain of salt, most warbirds are not 100% accurate replicas in all areas.    Many WW2 cockpit details are stripped out (armor, avionics, various small fittings, etc) and modern fittings added.  Same applies to hydraulic lines, etc. No guarantee that stuff like this is the same color or even in the same configuration as on a military F4U that was in service back in 1945.  In this regard, good period reference pics, such as those in Bell's book are invaluable.  

 

Anyhoo...  Here are a few pics of the wing fold.  Since this is sadly a football-free weekend, I'm hoping to get the other wing completed as well.  Wish me luck and as always, thanks for looking. 

 

This pic highlights some of the weathering I did with that artists silver pencil.  I really like using this!  Weathering is still ongoing, got to add a few black-ish scuffs and some chipping around the fuselage, below the cockpit.  The rest of the airframe will be left in it's current shape. 

IMG_0484

 

IMG_0483

 

IMG_0482

Share this post


Link to post
Share on other sites

Looking good 11Bee! I wish Tamiya would put a little more detail in the 1/48 Corsairs. They are outstanding kits but the wing fold area is a little weak in the detail area.

Share this post


Link to post
Share on other sites

Thanks Southern!   I haven't built there 48th F4U's so I can't add much but maybe someone does aftermarket resin wing folds?

 

Anyhoo...  So I've got a bit more completed.   I added the hydraulic lines to the port wing fold (no need for pics, it looks identical to the ones above) and I started adding some details to the canopy.   I never noticed previously but there is a good amount of hardware present that strangely enough, Tamiya missed.    See below (thanks to Jennings and Mike Maben over on LSP for these great pics):

 

WDKeGP.png

 

jrGmImK.jpg

 

This includes the red painted canopy locking handles, the yellow canopy release lever and a very complex pulley and cable system that runs from the exterior canopy release push-button to the yellow release handle.    I started out with the easy stuff - I fabricated the release handle from a thin diameter styrene rod, that I filed down to represent a more rectangular cross section.  I thought about using scrap PE but this handle is thicker and PE wouldn't look as realistic.   The knob on the end is simply multiple dabs of superglue that were allowed to dry between applications.   Aside from that, I just used a smaller diameter rod and a square of styrene as the base.    The locking handles were just a small section of .025" rod, cut to length and topped with a wafer thin section of .040" to represent the flared section at the end.  

 

Here is my progress so far....  I'm not totally happy with the outcome but I think it will look ok once the canopy is installed on the aircraft.   I'm on fence about the yellow handle that might be a bit too "chunky" but again, we'll see how it looks a bit later...  sometimes close up pics tend to exaggerate small details like this.  

IMG_0487

 

 

IMG_0486

 

Now I'm trying to figure out how to replicate the pulley system.   Space is pretty tight due to those mirrors and they kind of throw off the geometry of the system.   Not sure how I'm going to approach this one.   Stay tuned....

Share this post


Link to post
Share on other sites

inspiring work.  Now I want a corsair.

 

Geoff M

 

Share this post


Link to post
Share on other sites

Good work on the canopy, I never noticed the pulley and cable system!

Share this post


Link to post
Share on other sites

Thanks for the compliments guys.   Geoff, I know I sound like a broken record but I can't recommend this kit enough.   Even if you are just a straight out of the box type of builder, you won't be disappointed.  Rocat - Yeah, I never noticed any of that stuff either but once I saw the pics above, I had to at least give it a shot.  

 

 

Share this post


Link to post
Share on other sites

So the canopy work continues.    Very time consuming and given my inherent laziness, still not close to completion.    Based on the pics above, I've done my best to replicate that very complex locking system on the interior bow.  Unfortunately, I've had to simplify things quite a bit due to the geometry of the Tamiya canopy when the mirrors are installed and just the very small size of the hardware involved.    All in all, at this stage, I've added a total of approx 18 parts so far and still have a ways to go.   The pulleys were very short bits of .020 rod, glued to styrene bases.   Hard to really tell what color they were from those pics, I opted for a light grey with black centers.  Although the pics show two parallel runs of cable from each pulley, I just couldn't do it.   I hang my head in shame, please don't judge me harshly for this transgression. 

 

The cables were simply very fine lengths of stretched sprue, glued in place using very fine needle nose tweezers and a drop of white glue on either end. I won't using anything except white glue for this type of work.  CA can leave soot and if I screw up, I'll never get it off the clear plastic.    

 

I also added some scratches to the canopy release lever and locking handles.   To complete this, I still have to add some bits to the base of the canopy and then final runs of cable.   As noted, these bits are simplified and the geometry is off but I think it's still better than nothing.   Anyway, here are some pics.

 

IMG_0490

I''ll fix that silvering on the fuel tank cover decals before this is all over.  Trust me!

 

IMG_0488

 

IMG_0489

 

A few other pics to show the canopy and some additional weathering.  I used pastels to replicate the scuffing on the inner wings and added a few more scratches using that silver artists pencil (this thing is great for this type of work, well worth the $5.00 I paid for it at Michael's). 

IMG_0491

 

IMG_0492

 

IMG_0493

In the pic above, you will note that notch cut out of the rear of the canopy frame.   Previously, pilots would notice that the radio would sometimes short out when the canopy was open.   Come to find out, the rear edge of the canopy frame was coming in contact with the antenna wire that entered the fuselage right beneath it (this hasn't been added to my model yet).   Rather than spend money and time moving the wire entry point or insulating the canopy,  Vought just simply took some tin snips and cut away a small portion of the canopy frame.   Easy-peezy!  

 

IMG_0495

Anyway, that's it for now.  Thanks for looking.  

Share this post


Link to post
Share on other sites

11Bee, that really is some amazing work. Thanks for sharing your thoughts and struggles with us. I  like to see your forethought and planning as you went about the build. The results certainly are astonishing.  Kindest regards, Dutch

Share this post


Link to post
Share on other sites

Hey, thanks very much Dutch, greatly appreciate the compliment!

 

I'm calling the canopy complete.   I added some hardware behind the red "push to release" button and at the base of the canopy to replicate locking hardware.  As noted, I couldn't get it 100% accurate but to me at least, it looks better than the just the bare canopy bow that Tamiya left for me.    Maybe some kind soul would be interested in casting a bow interior in resin? 

 

I never noticed all this hardware before but now that I saw those pics, it'd be pretty hard to just use the kit parts.  Final parts count (not including the canopy and kit mirrors) is 23.  Add another 5-6 for parts I built and then launched into a different time zone with my tweezers.  Wow... such fun! :)   

 

Here are some pictures of the finished canopy.  Better to take them with the canopy off the aircraft, with the wings folded, they block the view.  I also added some paint scratches to the interior of the bow.  

 

IMG_0499

 

IMG_0498

 

IMG_0497

 

 

IMG_0496

 

 

Thanks for looking!  Next up is will be my feeble attempt at the wire antennas.   I'll be honest, I've never done these before and am not sure how it's going to work out.   In retrospect, I should have done this before I installed the wings because my access to the forward antenna post is now somewhat limited.   Any tips are much appreciated, especially since the Corsair's antenna configuration is somewhat involved.   

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×