Rob de Bie Posted September 15, 2018 Share Posted September 15, 2018 I'm working on a 1/48 F-84F model with all the stores that the RNLAF used. I've done the two types of 450 gallon inbaord pylon tanks, but I still need the smaller 230 gallon inboard pylon tanks. Monogram provides 230 gallon *outboard* pylon tanks, but they appear to be different. I cannot find drawings or dimensions of the inboard tanks, so I did a photo analysis. Never mind the Moire pattern.. I calculated a tank length of 46.37 percent of the fuselage length, making 112 mm. The Monogram 230 gallon outboard tanks are 108 mm, so a 4 mm section is missing. Further analysis showed that the missing length should added to the conical section at the rear, that is too 'blunt' and should more pointed. It looks like combining the front 3/4 of the 230 gallon outboard tank with the conical tail section (with fins) of the 450 gallon inboard tanks will do the trick. From another photo I concluded the fin span is the same for the 230 gallon and 450 gallon tanks. Before I cut up the plastic, I wanted to check here whether someone knows more about this subject! Rob Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.