Dave Roof Posted May 11, 2019 Share Posted May 11, 2019 They posted an image of the box top on their FB page. No other details that I'm aware of, other than it appears to be a late NTS bird with the turned exhaust. No release date given. Quote Link to post Share on other sites
Stephen Posted May 11, 2019 Share Posted May 11, 2019 48 minutes ago, Dave Roof said: They posted an image of the box top on their FB page. No other details that I'm aware of, other than it appears to be a late NTS bird with the turned exhaust. No release date given. I hope they''ll be consulting you to ensure it's done correctly/ Paint schemes and decals at the very least. Quote Link to post Share on other sites
Dave Roof Posted May 11, 2019 Author Share Posted May 11, 2019 3 minutes ago, Stephen said: I hope they''ll be consulting you to ensure it's done correctly/ Paint schemes and decals at the very least. Nope, I have nothing to do with KH. I offered to help on multiple occasions a few years ago and it wasn't accepted. They have a couple of others on their team that are familiar with the aircraft though. Quote Link to post Share on other sites
Whiskey Posted May 11, 2019 Share Posted May 11, 2019 (edited) No kidding? The only thing is I'm concerned about are the shape of the nose and proper cockpit IP's for both front and back seater. Everything else should be a breeze. Well there goes my stack of Italeri Whiskey's along with all the aftermarket for them. I'm actually going to be pretty upset if all of the current AH-1W decals released over the years don't fit this kit at all. I dunno if I can spend all that money again. Edited May 11, 2019 by Whiskey Quote Link to post Share on other sites
Dave Roof Posted May 11, 2019 Author Share Posted May 11, 2019 1 hour ago, Whiskey said: No kidding? The only thing is I'm concerned about are the shape of the nose and proper cockpit IP's for both front and back seater. Everything else should be a breeze. Well there goes my stack of Italeri Whiskey's along with all the aftermarket for them. I'm actually going to be pretty upset if all of the current AH-1W decals released over the years don't fit this kit at all. I dunno if I can spend all that money again. Very few markings applied to the Whiskey are form fitting, so almost every decal designed for the Italeri kit should fit this one, so long as KH get's the overall shape correct. When laid over the Bell drawings, the Italeri kit is dead on accurate in outline and shape. The lack of detail is what does that kit in. There is another player in the 48th Whiskey game that I am working with. Their initial reaction was to halt development. I'm trying to convince them it would be a bad idea to do so. Knowing what they're capable of, I am confidant a better Whiskey can be done. Quote Link to post Share on other sites
Dave Williams Posted May 11, 2019 Share Posted May 11, 2019 6 minutes ago, Dave Roof said: There is another player in the 48th Whiskey game that I am working with. Their initial reaction was to halt development. I'm trying to convince them it would be a bad idea to do so. Knowing what they're capable of, I am confidant a better Whiskey can be done. The other player should consider switching their project to 1/35 scale 😉 Quote Link to post Share on other sites
Dave Roof Posted May 11, 2019 Author Share Posted May 11, 2019 30 minutes ago, Dave Williams said: The other player should consider switching their project to 1/35 scale 😉 That is also a possibility. However, I've been trying to convince Academy into re-tooling theirs!! Quote Link to post Share on other sites
Whiskey Posted May 11, 2019 Share Posted May 11, 2019 1 hour ago, Dave Roof said: Very few markings applied to the Whiskey are form fitting, so almost every decal designed for the Italeri kit should fit this one, so long as KH get's the overall shape correct. When laid over the Bell drawings, the Italeri kit is dead on accurate in outline and shape. The lack of detail is what does that kit in. There is another player in the 48th Whiskey game that I am working with. Their initial reaction was to halt development. I'm trying to convince them it would be a bad idea to do so. Knowing what they're capable of, I am confidant a better Whiskey can be done. That's great news Dave, thanks for the confidence boost on that. It would be a marvelous kit if they include pre-NTS pieces such as the nose, IP's, and oil cooler. Or retain the original exhausts so you can build either version. That would be an amazing kit indeed. Quote Link to post Share on other sites
midnightprowler Posted May 12, 2019 Share Posted May 12, 2019 And again, the landmark granddaddy of them all, the "G" is ignored. Quote Link to post Share on other sites
dehowie Posted May 12, 2019 Share Posted May 12, 2019 25 minutes ago, midnightprowler said: And again, the landmark granddaddy of them all, the "G" is ignored. Why would you want a G with hundreds of amazing nose art options when you can have another flat grey low vis marked monotonal gunship? Quote Link to post Share on other sites
midnightprowler Posted May 12, 2019 Share Posted May 12, 2019 Exactly. Quote Link to post Share on other sites
Whiskey Posted May 13, 2019 Share Posted May 13, 2019 Maybe they are working backwards? Quote Link to post Share on other sites
midnightprowler Posted May 13, 2019 Share Posted May 13, 2019 I doubt it. A accurate G model has been on wants lists for some time now. Quote Link to post Share on other sites
Sarathi S. Posted May 13, 2019 Share Posted May 13, 2019 At least unlike the G, the W can get off the ground with a full warload... Honestly though, very glad they're releasing a modern W. I can have one sitting with my KH Zulu and not have to worry about finding aftermarket for the Italeri Whiskey, or, god forbid, fixing the Academy 1/35 Whiskey. Quote Link to post Share on other sites
Whiskey Posted May 14, 2019 Share Posted May 14, 2019 3 hours ago, Sarathi S. said: At least unlike the G, the W can get off the ground with a full warload... Honestly though, very glad they're releasing a modern W. I can have one sitting with my KH Zulu and not have to worry about finding aftermarket for the Italeri Whiskey, or, god forbid, fixing the Academy 1/35 Whiskey. I'd like to unload all of my Italeri related material that brings the W to an NTS airframe and only use them for the intended pre-NTS aircraft. Quote Link to post Share on other sites
stalal Posted May 14, 2019 Share Posted May 14, 2019 https://www.themodellingnews.com/2019/05/for-those-of-yall-who-love-whiskey.html#more Quote Link to post Share on other sites
Cameron Lynch Posted May 29, 2019 Share Posted May 29, 2019 Is there any chance this kit will include parts for the original "non-turned" exhausts? Or am I going to have to scab on the back end of my old Cobra Company resin update for the Italeri kit? Cameron Quote Link to post Share on other sites
Dave Roof Posted May 30, 2019 Author Share Posted May 30, 2019 On 5/12/2019 at 10:47 AM, dehowie said: Why would you want a G with hundreds of amazing nose art options when you can have another flat grey low vis marked monotonal gunship? You could just start up your own model company, invest thousands of your own dollars and produce the ultimate AH-1G that would make you a millions and sell like hot cakes with its hundreds of amazing nose art options. Quote Link to post Share on other sites
Whiskey Posted May 30, 2019 Share Posted May 30, 2019 9 minutes ago, Dave Roof said: You could just start up your own model company, invest thousands of your own dollars and produce the ultimate AH-1G that would make you a millions and sell like hot cakes with its hundreds of amazing nose art options. Quote Link to post Share on other sites
Floyd S. Werner, Jr. Posted May 31, 2019 Share Posted May 31, 2019 On 5/28/2019 at 10:44 PM, Cameron Lynch said: Is there any chance this kit will include parts for the original "non-turned" exhausts? Or am I going to have to scab on the back end of my old Cobra Company resin update for the Italeri kit? Cameron We proofed parts for a ‘Basic’ W and a late one. So we proofed a non-NTS nose and canopy and an NTS nose and canopy. Both exhausts were proofed as well. I make no promises on what is in the box. I’m not privy to that information until it comes out Floyd Quote Link to post Share on other sites
Dave Roof Posted May 31, 2019 Author Share Posted May 31, 2019 2 minutes ago, Floyd S. Werner, Jr. said: We proofed parts for a ‘Basic’ W and a late one. So we proofed a non-NTS nose and canopy and an NTS nose and canopy. Both exhausts were proofed as well. I make no promises on what is in the box. I’m not privy to that information until it comes out Floyd Were they provided with the NTS cockpit layout and notes for the different antenna arrangements? Quote Link to post Share on other sites
Floyd S. Werner, Jr. Posted May 31, 2019 Share Posted May 31, 2019 3 minutes ago, Dave Roof said: Were they provided with the NTS cockpit layout and notes for the different antenna arrangements? Yes, the cockpit, nose and exhausts as well as ASE. Floyd Quote Link to post Share on other sites
Whiskey Posted May 31, 2019 Share Posted May 31, 2019 OMG I love you guys! Finally an NTS and non-NTS Cobra!!!! Hopefully.... Quote Link to post Share on other sites
Whiskey Posted July 30, 2019 Share Posted July 30, 2019 I haven't read anything regarding an important detail that is left out of every AH-1 model in existence so I thought I'd ask. As far as this kit goes is there any information about the HSS and is Kittyhawk going to be including the necessary hardware to model it? Quote Link to post Share on other sites
Rotorman Posted July 30, 2019 Share Posted July 30, 2019 In 48 th scale..really. Hopefully will upgrade to 1/35 scale. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.