Dave Roof Posted July 20, 2019 Share Posted July 20, 2019 (edited) Here is the full list of new products that are done, or will be this week (noted accordingly). All retail for $5.00 ****NOTE TO ORDER**** It is going to take me a few days to get these up on the site. If you would like to order anything now, PayPal can be sent to the following address : flyingleathernecks@att.net **Make sure payment is sent for Goods and Services and put the item numbers and quantity in the notes section. Simply send the total plus $4.00 for shipping. Also remember that only TWO of the mask sets are ready to ship at this moment. Thank you, *First two numbers in item denote scale FLS (styrene product) FLV (vinyl product) FLM (mask set, Oramask vinyl) FLS48001 F/A-18A/B/C/D HUD Glass. Cut in .005 clear styrene. Enough pieces for six aircraft. FLS48002 F/A-18A/A+/A++/B Vertical Tail Stiffening plates cut in .005 plain styrene. One aircraft FLS48003 AV-8B, Harrier Gr.7/9 HUD Glass. Cut in .005 clear styrene. Enough for six aircraft. FLS48004 UH-1N Tail boom access panels. Cut in .005 plain styrene, these panels correct and replace the panels on the lower tail boom of the Kittyhawk kit. FLS32001 *Same as FLS48001 but in .007 clear styrene FLS32002 *Same as FLS48002 but in .010 plain styrene FLS32003 *Same as FLS48003 but in .007 clear styrene FLS32004 F/A-18A/C MFD Glass. Cut in .005 clear green styrene. Enough for two aircraft. FLV48004 AH-1Z TSS windows. Cut in blue and yellow holographic vinyl to replicate and correct the FLIR/TV windows on the Kittyhawk kit. FLV48005 AN/AAS-38 and AN/ASQ-173 FLIR/Designator lens. Cut in holographic blue and yellow vinyl and designed for the Hasegawa and Kinetic F/A-18 kits. Enough for six aircraft. FLV48006 AN/AAQ-13, AN/AAQ-14 and AN/AAQ-33 FLIR/TV/Designator lens. Cut in holographic blue and yellow vinyl. Designed to fit the pods in the Academy F-15E/I kits and Hasegawa Weapons Set E. Enough for six of each pod. FLV48007 AN/AAQ-28 LITENING Pod FLIR/TV windows. Cut in blue and yellow holographic vinyl. Will fit the pods included in the Academy F-15E/I, Hasegawa Weapons Set E and Brassin resin item. FLV32004 AN/AAQ-28 for Academy or Brassin * details the same as FLV48007 FLV32005 *Same as FLV48005 FLV32006 *Same as FLV48006, but without the AN/AAQ-33 Sniper parts FLV35001 AH-1Z TSS windows. Cut in blue and yellow holographic vinyl to replicate and correct the FLIR/TV windows on the Academy kit. Also included in our decal sheet, FL35001 Marine Skid Kid Zulus. Canopy/wheel masks produced with Oramask vinyl (all remaining sets will be completed and ready on or before the 31st of July). FLM48-19 F/A-18A/C for Hasegawa **In progress FLM48-20 F/A-18B/D for Hasegawa **In progress FLM48-21 F/A-18E for Revell **In progress FLM48-22 F/A-18F for Revell **In progress FLM48-23 F/A-18E for Hasegawa **In progress FLM48-24 F/A-18F for Hasegawa **In progress FLM48-25 F/A-18D ATARS for Kinetic - DONE FLM48-26 UH-1N for Kittyhawk - DONE FLM48-27 UH-1Y for Kittyhawk **In progress FLM48-28 AH-1Z for Kittyhawk **In progress FLM48-29 HH-53C/CH-53G for Revell **In progress FLM48-30 UH-34D for Gallery **In progress FLM32-7 F-8C for Trumpeter/Fisher - DONE FLM32-8 RF-8A/G for Trumpeter/Fisher - DONE FLM32-9 A-1E/AD-5 for Trumpeter/Fisher - DONE FLM32-10 A-1H/J for Zoukei-Mura **In progress FLM32-11 A-1H/J for Trumpeter **In progress FLM32-12 AV-8B for Trumpeter **In progress Edited July 26, 2019 by Dave Roof Quote Link to post Share on other sites
Glynn Jacobs Posted July 24, 2019 Share Posted July 24, 2019 Hi Dave, Been out of the loop for a while due to evil T.V. (computer) problems and just wanted to know if you are going to produce the 72nd scale KC-130 decals or if you will strictly be doing large scale decals? Take Care, WARDOG Quote Link to post Share on other sites
Dave Roof Posted July 25, 2019 Author Share Posted July 25, 2019 2 hours ago, Glynn Jacobs said: Hi Dave, Been out of the loop for a while due to evil T.V. (computer) problems and just wanted to know if you are going to produce the 72nd scale KC-130 decals or if you will strictly be doing large scale decals? Take Care, WARDOG Glynn, I will be doing the KC-130 sheet in 72nd as soon as I am able. Dave Quote Link to post Share on other sites
Glynn Jacobs Posted July 26, 2019 Share Posted July 26, 2019 That's good news, Dave. Good to go, WARDOG Quote Link to post Share on other sites
Dutch Posted July 26, 2019 Share Posted July 26, 2019 Dave, I second Brother Glynn's war whoop! Been waiting a long time to do KC-130T-30 164597 of VMGR-432 in both 1/144 & 1/72. Oorah! R/ Dutch Quote Link to post Share on other sites
Dave Roof Posted July 26, 2019 Author Share Posted July 26, 2019 Six New releases added to the list : FLS72003 - 1/72 F-4E/G/S/J(UK) belly strap pre-cut in .005 styrene FLS48005 - 1/48 F-4E/G/S/J(UK) belly strap pre-cut in .005 styrene FLS32005 - 1/32 F-4E/G/S/J(UK) belly strap pre-cut in .010 styrene FLV72003 - 1/72 F-4E/G/S/J(UK) belly strap pre-cut in self adhesive vinyl FLV48008 - 1/48 F-4E/G/S/J(UK) belly strap pre-cut in self adhesive vinyl FLV32007 - 1/32 F-4E/G/S/J(UK) belly strap pre-cut in self adhesive vinyl These will all be shipped to Spruebrothers next week and will also be available at our table in Chattanooga. Again, all Flying Leathernecks vinyl detail sets, masks and pre-cut styrene products retail for $5.00 Quote Link to post Share on other sites
Whiskey Posted July 26, 2019 Share Posted July 26, 2019 Yummy. Have a few F-4's in the build lineup that will need the strap. Quote Link to post Share on other sites
Stinger16 Posted July 27, 2019 Share Posted July 27, 2019 Hi Dave, will you be attending the ipms nationals as a vendor ? If so, please bring some 1/35 ah-1z decals and other goodies Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.