Porkbits Posted December 27, 2020 Share Posted December 27, 2020 (edited) 3 hours ago, legend1 said: i'm not sure but the set for the su 27 SM looks the correct but we need to check ! Thanks! So maybe something like these: LINK Edited December 27, 2020 by Porkbits Quote Link to post Share on other sites
legend1 Posted December 28, 2020 Share Posted December 28, 2020 19 hours ago, Porkbits said: Thanks! So maybe something like these: LINK 19 hours ago, Porkbits said: Thanks! So maybe something like these: LINK have a look herehttp://www.theworldwars.net/resources/resource.php?r=camo_vvsmod&fbclid=IwAR1T9x5A_HMKjKZgLFP4zIrkhZK53lfwqSyO3VW_EMFV71Bnhj2euNqWaiE Quote Link to post Share on other sites
legend1 Posted December 28, 2020 Share Posted December 28, 2020 http://www.theworldwars.net/resources/resource.php?r=camo_vvsmod&fbclid=IwAR1T9x5A_HMKjKZgLFP4zIrkhZK53lfwqSyO3VW_EMFV71Bnhj2euNqWaiE Quote Link to post Share on other sites
legend1 Posted December 28, 2020 Share Posted December 28, 2020 just copy on search tool bar its very good source for Russian color scheme Quote Link to post Share on other sites
Porkbits Posted December 29, 2020 Share Posted December 29, 2020 21 hours ago, legend1 said: just copy on search tool bar its very good source for Russian color scheme Thanks for info! Appreciate it. Quote Link to post Share on other sites
madcop Posted December 29, 2020 Share Posted December 29, 2020 On 12/22/2020 at 5:54 AM, solher1 said: I got two kits, the one I got from Sprue Brothers today is fine, the one I got from Lucky Model has the same problem as described by Helmsman above. Easy fix, I don't know. Juan Preordered mine from AMMO MIG (Spain) in October and received it today. First check went to the armement and to my relief, everything is O.K. Madcop Quote Link to post Share on other sites
Tapchan Posted December 29, 2020 Share Posted December 29, 2020 (edited) 7 minutes ago, madcop said: Preordered mine from AMMO MIG (Spain) in October and received it today. First check went to the armement and to my relief, everything is O.K. Madcop Preordered from MIG too. Package was sent 18th even tho I requested them to send it in January. Tracking is not working at all. I'm away from home until 3rd January and afraid the package will be returned or go missing if my neighbour pick it up... Edited December 29, 2020 by Tapchan Quote Link to post Share on other sites
madcop Posted December 30, 2020 Share Posted December 30, 2020 8 hours ago, Tapchan said: Preordered from MIG too. Package was sent 18th even tho I requested them to send it in January. Tracking is not working at all. I'm away from home until 3rd January and afraid the package will be returned or go missing if my neighbour pick it up... Depends where you're living. Mine was also sent on the 18th of december and I was informed on the 28th through PostNL tracking system that my parcel would be delivered the 29th between midday and 4.30pm. Can't you still choose a "Pick-up" point instead of your address ? Hope you can get in touch with the Agency who should deliver your parcel.... Good luck. Madcop Quote Link to post Share on other sites
Curt B Posted December 30, 2020 Share Posted December 30, 2020 Hi All, Just thought I'd jump in here to add my $0.02. I got my GWH SU-27UB from SprueBrothers in early November, and decided, based on the discussion here on curved missiles, to verify mine. All of the weapons in my kit are perfectly straight. I've read with interest this lengthy thread, and certainly a lot of opinions presented here. I'm not certain yet whether I"m sold on the multi-part exhaust of this kit, and in fact, if there are ever parts of any jet airplane model that I am inclined to want to replace with aftermarket resin pieces, they are generally the ejection seats, and the exhaust nozzles/afterburner parts. It will be interesting to see what aftermarket companies do with the exhaust for this kit. As far as I can tell, no such dedicated aftermarket exhausts have yet been made available (if anyone knows different, please provide some info), but I'll be looking forward to seeing if such aftermarket items can/will improve on the detail of the kit parts. Quote Link to post Share on other sites
Tapchan Posted December 30, 2020 Share Posted December 30, 2020 (edited) 10 hours ago, madcop said: Depends where you're living. Mine was also sent on the 18th of december and I was informed on the 28th through PostNL tracking system that my parcel would be delivered the 29th between midday and 4.30pm. Can't you still choose a "Pick-up" point instead of your address ? Hope you can get in touch with the Agency who should deliver your parcel.... Good luck. Madcop I've investigated PostNL website and the package has been delivered yesterday... I assume my neighbour from the downstairs picked it up and left it in the staircase. Unfortunately I'll be back in whole 4 days. Edited December 30, 2020 by Tapchan Quote Link to post Share on other sites
madcop Posted December 30, 2020 Share Posted December 30, 2020 1 minute ago, Tapchan said: I've investigated PostNL website and the package has been delivered yesterday... I assume my neighbour from the downstairs picked it up and left it in the staircase. Unfortunately I'll be back in whole 4 days. Toooooooooooooo bad ! Just hope you've got a honest neighbour ! Keep us posted ....😉 Quote Link to post Share on other sites
ya-gabor Posted December 30, 2020 Share Posted December 30, 2020 1 hour ago, Curt B said: Hi All, Just thought I'd jump in here to add my $0.02. I got my GWH SU-27UB from SprueBrothers in early November, and decided, based on the discussion here on curved missiles, to verify mine. All of the weapons in my kit are perfectly straight. I've read with interest this lengthy thread, and certainly a lot of opinions presented here. I'm not certain yet whether I"m sold on the multi-part exhaust of this kit, and in fact, if there are ever parts of any jet airplane model that I am inclined to want to replace with aftermarket resin pieces, they are generally the ejection seats, and the exhaust nozzles/afterburner parts. It will be interesting to see what aftermarket companies do with the exhaust for this kit. As far as I can tell, no such dedicated aftermarket exhausts have yet been made available (if anyone knows different, please provide some info), but I'll be looking forward to seeing if such aftermarket items can/will improve on the detail of the kit parts. Hi Curt B, If you dont like the seat and the exhaust please feel free to blame me. After all the seat was in all respects my work while for the exhaust I added details and an idea. How it turned out in the end in plastic form is . . . Still think that given the constraints of injection moulding we tried our best to give as good and authentic parts as possible for both of these areas. I think a Russian resin maker has exhaust cans for the Su-27. Does it fit the G.W.H kit? I have no idea. For the ejection seat this is the early K-36DM Seria 2 version of the seat. For the G.W.H kit I made several visits to operational MiG-29 unit (which has exactly the same seat) to do some measurements and photo work as well as using my own K-36 for measurements and details. Is it authentic? It is up to everyone to decide for themselves. Looking around the market I am sure you will be able to find other aftermarket seats. Are they good, authentic? Have no idea. I can speak only for our work. Still hope you will enjoy the kit! Best regards Gabor Quote Link to post Share on other sites
Curt B Posted December 30, 2020 Share Posted December 30, 2020 2 minutes ago, ya-gabor said: Hi Curt B, If you dont like the seat and the exhaust please feel free to blame me. After all the seat was in all respects my work while for the exhaust I added details and an idea. How it turned out in the end in plastic form is . . . Still think that given the constraints of injection moulding we tried our best to give as good and authentic parts as possible for both of these areas. I think a Russian resin maker has exhaust cans for the Su-27. Does it fit the G.W.H kit? I have no idea. For the ejection seat this is the early K-36DM Seria 2 version of the seat. For the G.W.H kit I made several visits to operational MiG-29 unit (which has exactly the same seat) to do some measurements and photo work as well as using my own K-36 for measurements and details. Is it authentic? It is up to everyone to decide for themselves. Looking around the market I am sure you will be able to find other aftermarket seats. Are they good, authentic? Have no idea. I can speak only for our work. Still hope you will enjoy the kit! Best regards Gabor Hi Gabor, and thanks for the response. As I wrote, it's typical for me to replace the seat(s) and exhaust(s), but certainly not something that I always do, automatically. I would be thrilled to find no need for those replacements, and from the photos you have been supplying, comparing the kit parts to the real thing, I'm thinking that aftermarket parts being an improvement is pretty unlikely! With the exception of using the new Quinta cockpit decals, mostly because I'm too lazy to do the necessary work to make the existing cockpit detail look fantastic (and the kit details on the panels is nothing short of stunning!, I'd love to build this airplane completely out of the box. I'm leaning in that direction, anyway. I know for sure that no matter which direction I go, this airplane is going to be the centerpiece of the completed models I have on display!!! Quote Link to post Share on other sites
Inquisitor Posted December 30, 2020 Share Posted December 30, 2020 (edited) 7 hours ago, Curt B said: Hi All, Just thought I'd jump in here to add my $0.02. I got my GWH SU-27UB from SprueBrothers in early November, and decided, based on the discussion here on curved missiles, to verify mine. All of the weapons in my kit are perfectly straight. I've read with interest this lengthy thread, and certainly a lot of opinions presented here. I'm not certain yet whether I"m sold on the multi-part exhaust of this kit, and in fact, if there are ever parts of any jet airplane model that I am inclined to want to replace with aftermarket resin pieces, they are generally the ejection seats, and the exhaust nozzles/afterburner parts. It will be interesting to see what aftermarket companies do with the exhaust for this kit. As far as I can tell, no such dedicated aftermarket exhausts have yet been made available (if anyone knows different, please provide some info), but I'll be looking forward to seeing if such aftermarket items can/will improve on the detail of the kit parts. There are no dedicated Resin Exhaust for that kit. But from all the accuracy discussions in other flanker threads and from the various russian resin AM manufacturers the correct diameter in 1/48 should be almost exactly 1 inch. The AMUR Reaver exhaust catalog number RC4823, AMigo Models catalog number 48023-1 and Res-kit RSU48-0012 should fit if kit's is 'correctly' sized. Edited December 30, 2020 by Inquisitor Quote Link to post Share on other sites
Stephen Posted December 30, 2020 Share Posted December 30, 2020 I received my kit yesterday and the missiles are all OK. Quote Link to post Share on other sites
Curt B Posted December 30, 2020 Share Posted December 30, 2020 3 hours ago, Inquisitor said: There are no dedicated Resin Exhaust for that kit. But from all the accuracy discussions in other flanker threads and from the various russian resin AM manufacturers the correct diameter in 1/48 should be almost exactly 1 inch. The AMUR Reaver exhaust catalog number RC4823, AMigo Models catalog number 48023-1 and Res-kit RSU48-0012 should fit if kit's is 'correctly' sized. Excellent! Thank you! Quote Link to post Share on other sites
Scooby Posted December 31, 2020 Share Posted December 31, 2020 Received my Sprue Brothers Daily Deal ($64.99) kit today, what a kit! And none of my missiles are bent! Quote Link to post Share on other sites
ya-gabor Posted December 31, 2020 Share Posted December 31, 2020 The clock is ticking fast and very soon this dreadful 2020 will end! I would like to wish everyone where ever you are around the world a happy new year and hopefully some sort of return to so called “normality” in 2021 ! ! ! Stay safe!!!!! Best regards Gabor Quote Link to post Share on other sites
B.Sin Posted December 31, 2020 Share Posted December 31, 2020 35 minutes ago, ya-gabor said: The clock is ticking fast and very soon this dreadful 2020 will end! I would like to wish everyone where ever you are around the world a happy new year and hopefully some sort of return to so called “normality” in 2021 ! ! ! Stay safe!!!!! Best regards Gabor Thank you, Gabor! Happy New Year to you also! Quote Link to post Share on other sites
Porkbits Posted December 31, 2020 Share Posted December 31, 2020 Happy New Year! Have some great kits lined up, so.....I've got stuff to keep me occupied until pandemic finally ends (another year, probably). Quote Link to post Share on other sites
legend1 Posted January 2, 2021 Share Posted January 2, 2021 On 12/29/2020 at 10:57 AM, madcop said: Preordered mine from AMMO MIG (Spain) in October and received it today. First check went to the armement and to my relief, everything is O.K. Madcop it is easy fix just live it under running hot water for few seconds and try to straight the bend if is not enough just put under hot water again ! i use this to fix the depression on my amk tomcat on the side of the back end ! it works Quote Link to post Share on other sites
legend1 Posted January 2, 2021 Share Posted January 2, 2021 hi all happy 2021 ! for those who are interested i found these picture about the bort 100 under maintenance Quote Link to post Share on other sites
DIO Posted January 2, 2021 Share Posted January 2, 2021 (edited) If a slightly bent part is an issue worth saying, then better think of buying diecast models 😝😝😝 Common guys, we should be taking basic modelling skills as for granted. This cannot be something to alert about... For those with some history in the hobby, just remember the Monogram, magnificent, history series. More parts wrapped than not. Spoiled, spoiled, spoiled 😘😘😘 Edited January 3, 2021 by DIO Quote Link to post Share on other sites
Specter1075 Posted January 2, 2021 Share Posted January 2, 2021 30 years ago, cars didn't even come with air bags, and now people complain when their air bag sensor fails? Spoiled spoiled spoiled. Quote Link to post Share on other sites
Tapchan Posted January 3, 2021 Share Posted January 3, 2021 Tools changed a bit since then, they allow for way better quality now. This is QC issue, I expect no such problems in expensive kit with no customer service behind 🙂 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.