phantom Posted March 16, 2020 Share Posted March 16, 2020 With everything and everyone home due to Corona, I figured I would repair a older model whose lights had stopped working. I ripped the ship apart and put in some 20 new LEDs, which are far brighter then the next to dead lights the ship used to have. Sometimes a rebuild is a good thing. Also saved me 100s for a factory light set and the 100 plus for buying a new model. Quote Link to post Share on other sites
Scott Smith Posted March 16, 2020 Share Posted March 16, 2020 Still kicking my butt for selling that kit years ago. And it was one of those Hobby Lobby 50% off deals when I bought it. Just trying to justify paying $100+ for one now. Quote Link to post Share on other sites
phantom Posted March 16, 2020 Author Share Posted March 16, 2020 Here is the roomfull... Quote Link to post Share on other sites
Scott Smith Posted March 16, 2020 Share Posted March 16, 2020 Someone has time to build! I’m envious. I see a lot of build models I still have in kit form. Quote Link to post Share on other sites
niart17 Posted March 23, 2020 Share Posted March 23, 2020 I see that last pic and the first thing I think....not enough phantoms!😀 Seriously though, beautiful build on the Enterprise! Quote Link to post Share on other sites
phantom Posted March 24, 2020 Author Share Posted March 24, 2020 3 hours ago, niart17 said: I see that last pic and the first thing I think....not enough phantoms!😀 Seriously though, beautiful build on the Enterprise! Thanks, I know about the poor Phantoms, only around 150 left of the 230 some odd. Quote Link to post Share on other sites
ikar Posted March 27, 2020 Share Posted March 27, 2020 I think the NX is my favorite Enterprise, It was a time when they didn't have everything down pat and things could go wrong. They were also more like NASA in some ways, trying to learn and being somewhat excited at things they encounter along the way. I have one that I lit up but about half of the lights have died, including one of the nacelles. What is a good source for a decent lighting kit? I was also thinking about getting the phase cannons for one of my models. Quote Link to post Share on other sites
phantom Posted March 27, 2020 Author Share Posted March 27, 2020 I get mine at the local surplus store. But electronic, computer parts stores also have them. Just not this month. Those stores are closed due to the pandemic. Quote Link to post Share on other sites
ikar Posted March 28, 2020 Share Posted March 28, 2020 I've never tried lighting anything from scratch since I wired up a couple little light bulbs to some batteries inside my first Monogram B-52D back in the 60s. That sound a bit out of my league. Quote Link to post Share on other sites
phantom Posted April 2, 2020 Author Share Posted April 2, 2020 Its actually really easy. Just had to re-learn how to solder. That was back in high school so almost 40 years ago. Still have some lights, wire and transistors ready for the next build. Just do not know what the next ship build will be. Quote Link to post Share on other sites
ikar Posted April 5, 2020 Share Posted April 5, 2020 In that scale you have the Franklin, a couple different scale D-7 Battlecruisers, and the Romulan and Klingon Birds of Prey, it you stick to Star Trek. Quote Link to post Share on other sites
Brett M Posted April 22, 2020 Share Posted April 22, 2020 Looks good, nice work.....and jealous of that collection! side note for readers, I have a unbuilt 1/350 NX I’d let go. Message me...... Quote Link to post Share on other sites
Scott Smith Posted May 27, 2020 Share Posted May 27, 2020 Well, this thread certainly cost me some spare change! I picked up the kit from Brett (Thanks again Brett 👍) and now I have pulled the 1/350 TOS kit from the stash and decided to start with that one first. I have the Tena lighting kit on the way along with some LED ribbon lighting to cut down for the interior lights, kit was opened and all parts cleaned off and ready for pre-painting work. Just ordered 5 cans of Tamiya Light Ghost Gray and started clearing space on my garage bench to do the spraying. In the meantime I'm putting the wraps on my Blue Angels Skyhawk so I can jump into these SiFy builds. Somewhere along the way I'm going to squeeze in the NX-01 and another lighting kit. I think these two will be a great break from all the airplanes I've been focusing on. I did see where one guy was building and selling Armatures for the NX-01. Basically a skeleton made up of steel rods welded together that forces the correct shape and prevents engine nacelle droop. From doing some reading though, it sounds like it was the first production run of the NX-01 kits that had this issue. Apparently the kit I got from Brett is the second release where they fixed this. Problem is the guy that was building these armatures is no longer active on the website and I cannot get in touch with him. Quote Link to post Share on other sites
phantom Posted May 27, 2020 Author Share Posted May 27, 2020 Right on Scott, best recommendation I can make on lighting....Keep your wires as short as possible. The first one I did there was too much material. Had to wedge it all in there and a couple lights disconnected. I also had to practice soldering as I had not done it in 40 years. But that was easy once I got the hang of it again. Quote Link to post Share on other sites
Scott Smith Posted May 27, 2020 Share Posted May 27, 2020 My real job is an electronics tech. Soldering and running cables neatly is second nature for me. But I'm use to much larger things like classroom lecterns. A model should present a challenge! Been watching all kinds of YouTube videos on routing and gluing down wiring with a hot glue gun and CA glue. Quote Link to post Share on other sites
ikar Posted May 27, 2020 Share Posted May 27, 2020 You could also get the phase cannons for the ship and have them lowered from their ports. Quote Link to post Share on other sites
Captain Han Solo Posted May 30, 2020 Share Posted May 30, 2020 AWESOME!!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.