ya-gabor Posted September 5, 2022 Share Posted September 5, 2022 I know it has nothing to do with the F-4 Phantom. But it has a lot to do with the way minds behind FineMolds are thinking. I like the idea! They are releasing a mortar (1/35 Ground Self-Defense Force 120mm Mortar RT) and on the sprues there are some strange things. Well actually they used the sprue (which basically serves its purpose after the modeller cuts parts from it and is destined for the bin after that) as a template. For correctly setting up the tripod of the mortar one can use the specially made holes on the sprue to set the legs of the tripod at exact distance. Very nice idea and innovative! Dear FineMolds, Now how about some news on follow up F-4 Phantoms??? Like for example an F-4E with the late wings??????? Best regards Gabor Quote Link to post Share on other sites
Cool Hand Posted September 5, 2022 Share Posted September 5, 2022 Oh, that brilliant! Quote Link to post Share on other sites
southwestforests Posted September 5, 2022 Share Posted September 5, 2022 12 hours ago, ya-gabor said: Well actually they used the sprue (which basically serves its purpose after the modeller cuts parts from it and is destined for the bin after that) as a template. And that template or jig counts as an actually grand idea! Quote Link to post Share on other sites
ya-gabor Posted September 6, 2022 Share Posted September 6, 2022 It is a great idea in my opinion, but of course everyone have different thinking of what is good or not. Here a dead material in the form of the sprue is used as a template to help modellers in building a stand with exact angles of the legs. Of course one can have pages of instructions with explanation of how it should be built with drawings and all. But this is a smart idea! Actually if one looks at the new kit there is something else too here. It is always difficult to produce with injection moulding a tire which has the threads on it. Companies have tried different solutions. One can use slide mould technology to make the tire. It is extremely costly tool making and needs very precise alignment of the tools and even then there will be a rib where the tools meet. For example Zvezda with the Su-25 made a main tire where the running surface is produced in two parts to which you add the side walls and the tire hub. There are companies who simply don’t care and provide a plain surface, if you want to do with it something then go ahead. FineMolds tried something different. The tire has a wavy thread on it (like most truck tires). Now how do you make this??? Here is what FineMolds has said about this on their site: New product 1/35 Ground Self-Defense Force 120mm Mortar RT w/ Heavy Tractor Test shot assembly check❗️ 5 parts are used to make 1 tire. I wanted to reproduce the tire pattern with plastic, so I'm glad it worked out well Yes it is a little complicated by looking at it, but the end result is perfect! Of course tooling costs are higher, but what are your priorities? In this case they wanted to make a tire which looks exactly right. One has the central part with the hub to which you add a part with thread on both sides and finally the side walls from left and right. There are location pins to make it more exact. How do you make this? How do you make this in this scale?? Here are the parts which make up every tire And here is the production tool. OK it takes some space but the parts make up into a nice tire with fine details! Why is it interesting here? It shows a company which has a little bit different way of thinking when solving problems. Lets hope similar novel ideas will be implemented in future Phantoms also (or other kits)! Best regards Gabor Quote Link to post Share on other sites
Craig Baldwin Posted September 6, 2022 Share Posted September 6, 2022 1 hour ago, ya-gabor said: Why is it interesting here? It shows a company which has a little bit different way of thinking when solving problems. An excellent example of when the president of the company is actually a model builder himself and cares about quality! After completing my second FineMolds kit, the F-2A, I can where they have tried to get as much detail and accuracy into every part. Quote Link to post Share on other sites
Craig Baldwin Posted September 6, 2022 Share Posted September 6, 2022 (edited) Yes, another release. '67 C's and '70s Js. Edited September 6, 2022 by Craig Baldwin Quote Link to post Share on other sites
GeneK Posted September 6, 2022 Share Posted September 6, 2022 To add to your post, Craig: (Using Google Translate) F-4J: Antenna for the late J added. F-4C: No mention of new parts. (As reflected in the lower price than the J). "Details will be announced at the #All Japan Model Hobby Show 2022 on October 1st and 2nd. Release for both kits is in January 2023. I wish FineMolds would quite milking the "old" molds and get to the slatted versions! I hear your AMEN Gabor! Gene K Quote Link to post Share on other sites
Craig Baldwin Posted September 17, 2022 Share Posted September 17, 2022 A new DXM sheet for B/J/N in 72nd. I have ordered directly from them and delivery time was good. Quote Link to post Share on other sites
GeneK Posted September 20, 2022 Share Posted September 20, 2022 On 9/17/2022 at 8:35 AM, Craig Baldwin said: A new DXM sheet for B/J/N in 72nd. I have ordered directly from them and delivery time was good. Service from DMX to the US has also been great (for me 1 1/2 weeks). However, I can't find a link on the DXM site to this new sheet ... yet. Gene K Quote Link to post Share on other sites
Hoops Posted September 20, 2022 Share Posted September 20, 2022 3 hours ago, GeneK said: Service from DMX to the US has also been great (for me 1 1/2 weeks). However, I can't find a link on the DXM site to this new sheet ... yet. Gene K It's not on the website yet, but it is on their Facebook page. Quote Link to post Share on other sites
Craig Baldwin Posted September 20, 2022 Share Posted September 20, 2022 29 minutes ago, Hoops said: It's not on the website yet, but it is on their Facebook page. 3 hours ago, GeneK said: Service from DMX to the US has also been great (for me 1 1/2 weeks). However, I can't find a link on the DXM site to this new sheet ... yet. My error, the announcement from this image stated it is a near future release. Craig Quote Link to post Share on other sites
GeneK Posted September 26, 2022 Share Posted September 26, 2022 (edited) Here are a couple of screenshots taken from a video of the FineMolds president talking about new models to be shown the forthcoming Tokyo model extravaganza at the end of the month. Most certainly not Shigeo Koike quality, but the F-4J art is passable ... the distorted F-4C, however, not so much! Gene K Edited September 26, 2022 by GeneK Quote Link to post Share on other sites
Craig Baldwin Posted September 26, 2022 Share Posted September 26, 2022 This Saturday, October 1 at the All Japan Model & Hobby Show 2022, there will be a new product announcement by FineMolds. Anyone hopeful like myself wishes for the RF-4 release. Quote Link to post Share on other sites
GeneK Posted September 26, 2022 Share Posted September 26, 2022 2 hours ago, Craig Baldwin said: This Saturday, October 1 at the All Japan Model & Hobby Show 2022, there will be a new product announcement by FineMolds. Anyone hopeful like myself wishes for the RF-4 release. Probably a tank accompanied by a scantily clad anime gal with big ... eyes. Gene K Quote Link to post Share on other sites
habu2 Posted September 26, 2022 Share Posted September 26, 2022 3 hours ago, GeneK said: Probably a tank accompanied by a scantily clad anime gal with big ... eyes. Gene K ....molded in hot pink...... Quote Link to post Share on other sites
ya-gabor Posted October 1, 2022 Share Posted October 1, 2022 Here is inside a display a built and painted F-4C and a J in the background at the Japan show. Looks NIIIIIICCCE!!!!! Best regard Gabor Quote Link to post Share on other sites
ya-gabor Posted September 1 Share Posted September 1 It has been some time since news . . . In spring next year a Thunderbirds F-4E boxing should be released also with a F-4D to follow. Best regards Gabor Quote Link to post Share on other sites
GeneK Posted September 3 Share Posted September 3 On 9/1/2023 at 2:22 AM, ya-gabor said: It has been some time since news . . . In spring next year a Thunderbirds F-4E boxing should be released also with a F-4D to follow. March 2024. Gene K Quote Link to post Share on other sites
GeneK Posted September 6 Share Posted September 6 Many around the globe have voiced a desire for FM to eventually produce an RF. Well, my friend John Huggins is ahead of that "WANT" - see his fine FineMolds RF build here on ARC. My hope is that FM does a thin wing F-4B next, and subsequently uses that wing for an RF-4B/C. Then we need a slatted wing F-4E followed by a small mod to get the FM F-4G ... and RF-4E. Sounds like a plan to me. Gene K Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.