Jump to content

Kinetic 1/48 F 16 Block 52+ & Block 52M HAF Dual Build (WIP)


Recommended Posts

Today I was able to take some pictures under the sunlight.

 

I reduce a little bit the pre shading effect and paint the refueling port.

 

63893_md.jpg

 

63894_md.jpg

 

63895_md.jpg

 

Thanos

 

 

Link to post
Share on other sites

Looks like you’ve nailed the colours very well, did you use them straight from the bottle?

 

Although it looks a bit stark at the moment due to the contrast between the radome and CFT’s, but once you spray them up, it’ll all come together.

 

👍🏻🇬🇷👍🏻🇬🇷👍🏻🇬🇷

Link to post
Share on other sites
7 hours ago, scotthldr said:

Looks like you’ve nailed the colours very well, did you use them straight from the bottle?

 

Although it looks a bit stark at the moment due to the contrast between the radome and CFT’s, but once you spray them up, it’ll all come together.

 

👍🏻🇬🇷👍🏻🇬🇷👍🏻🇬🇷

Thank you very much Scott

 

Yes the paints were used straight from the bottle.

 

I agree with you but I wanted to finish with the main camo prior to radome and CFts' painting.

Link to post
Share on other sites
  • 2 weeks later...

Hello fellow modellers

 

The painting is fanally finished. Details like antennas and some lines on the wings were painted with FS36270, the despensers were painted with Jet Exhaust and the Exhaust of the jet fuel starter was painted with stainless steel.

 

64129_md.jpg64133_md.jpg64132_md.jpg64130_md.jpg64131_md.jpg64439_md.jpg

 

Finally I received a new decalsheet with a lot more decals than the other decalsheets. Also the roundels' colour seems more accurate. Another nice feature is that faded decals  are also included.

 

64440_md.jpg64441_md.jpg

 

64442_md.jpg

 

Thank you very much!!

Link to post
Share on other sites
Posted (edited)
2 hours ago, SERNAK said:

Beautiful colours but, these remind me more of a Block30/32 than a later block52+.

 

You are right Block52+ have a darker colour due to coating's graphite. But this airplane will eventually become a Block52M, which have a cleaner finish closer to the one that Block 30/50 have. I created this thread almost a year ago, but during Christmas I got a twin seater as a present, from which I decided to build a Block52M, but I couldn't find out how to change the title. 

 

This is a photo of the actual aircraft.

 

5890b1bd93182a3dfd45ead058ba449c.jpg

 

The lighting is not the best one in the indoor photos. 

Edited by iceman98
Link to post
Share on other sites
  • iceman98 changed the title to Kinetic 1/48 F 16 Block 52+ & Block 52M HAF Dual Build (WIP)

Very nice work on the camouflage. :thumbsup: Nice subject, too. Hadn't seen those markings before. The tiger stripes on the tanks look pretty cool.

Link to post
Share on other sites
  • 2 weeks later...
10 hours ago, scotthldr said:

Any progress on the build?

A lot of progress on the build, but no time to post.

 

After four days of decal application the airplane is almost finished.

 

64791_md.jpg64792_md.jpg

 

64797_md.jpg64796_md.jpg

 

64793_md.jpg64794_md.jpg

 

64795_md.jpg

 

Next step weathering. I will paint some smoke on the gun and I will apply a light panel liner.

 

Also I finished the seats. Unfortunately I received the resin seats with some broken parts and the seller didn't refund me or replaced them. Also I sanded the sides of the seats in order to make them fit into the cockpit.

 

64933_md.jpg64934_md.jpg64932_md.jpg

 

Link to post
Share on other sites
Posted (edited)

That is looking sweet🤤, can’t wait to see it finished.

 

🇬🇷“Και σαν πρώτα ανδρειωμένη,
Χαίρε, ω χαίρε, ελευθεριά! “🇬🇷

 

How’s the Blk 52+ coming along?

 

 

 

 

 

 

 

 

Edited by scotthldr
Link to post
Share on other sites
On 5/15/2021 at 6:01 PM, scotthldr said:

That is looking sweet🤤, can’t wait to see it finished.

 

🇬🇷“Και σαν πρώτα ανδρειωμένη,
Χαίρε, ω χαίρε, ελευθεριά! “🇬🇷

 

How’s the Blk 52+ coming along?

 

Thank you very much Scott!!! 

I focused on finishing Blk52M, so I let Block52+ on shelf. I have finished sanding it and I have to glue main landing gear prior to paint it. 

Link to post
Share on other sites
Posted (edited)

Finally I had some time to almost finish the Block52M. I wasn't satisfied with the included pitot so I ordered some resin pitots. Now I have to deal with some fitting issues on the seats and find a way to improve static dischargers. Some minor details still have to be painted. Your opinion is very importand since it's my first complete 1/48 build and I tried to implement a lot of techniques for the first time. Also this kit was a nice testbed to test aegean ghost camo and the custom have glass varnish. 

 

65056_md.jpg65061_md.jpg

 

65050_md.jpg

 

65053_md.jpg65054_md.jpg

 

65055_md.jpg65057_md.jpg

 

65058_md.jpg65059_md.jpg

 

65060_md.jpg

 

65052_md.jpg

 

Edited by iceman98
Link to post
Share on other sites

Well if that's your first 1/48 kit then I cannot wait until your second and third and so on...... 

 

Absolutely fantastic, you have caught the 'Aegean Ghost' scheme on the Blk52M spot on:thumbsup:.  The Greys look exactly as they should be and the weathering is just enough. The decals have settled very well, especially on the CFT's and drop tanks:thumbsup:. As for the pitot, I would highly recommend the turned brass ones made by Master of Poland, which you can pick up on Ebay.

 

http://www.master-model.pl/product/am-48-008.html

 

Looking forward to seeing the 52+ progress.

Link to post
Share on other sites
  • 3 weeks later...

Finally the block52+ is painted, only some minor details are missing.

 

Once again AK Real Colours were used, straight from the bottle. 

After the initial painting RLM66 filter was used to darken the colours. 

Then, I repainted the airplene in order to make a post shading effect.

 

65445_md.jpg65446_md.jpg65448_md.jpg65447_md.jpg

 

To produce the graphite colour I used AK Xtreme Metal Jetexhaust

 

65452_md.jpg65453_md.jpg65454_md.jpg65455_md.jpg65456_md.jpg65457_md.jpg

 

Finally to enhance the metallic effect I sprayed a very thin layer of AK Xtreme Metal Stainless Steel.

 

65517_md.jpg65516_md.jpg65515_md.jpg65514_md.jpg

 

Currently, I am painting some lines and the nose cone.

 

Hope you like it!!!!

Link to post
Share on other sites

Another fine paint finish, you’ve caught the dark and dirty look of the Blk52’s very well. 👍🏻
 

Looking forward to seeing the two together🇬🇷

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...