Jump to content

Recommended Posts

Posted (edited)

Hello Everyone. . . 

 

A Mig-29SMT from trumpeter in 1/72 scale. I had built this model a while back. Now I decided to put this on a base, thus the Snow Diorama. This was my first time doing a diorama, its a small one where I just had to build a Base and merely modifying the MIG I built. 

 

The modifications are

1. Missile covers done by Paper. For the R27s and the RVVs, the paper was rolled into a cone and superglued to the missile. Thereafter it was sanded to the desired shape. For the R73s a small square was cut and just pushed on the Nose of the missile giving the shape of a cover. This looked descent enough to pass by in this scale.  These were painted red finally.

 

2. The Engine intake cover, Upper intake cover and the engine exhaust covers are all done by this plastic sheet. I used a ball pen to get the required embossed effect on these covers. For the upper intakes the walk area was marked by using tamiya masking tape.

 

3. The pitot cover was done using paper again and the string was a sewing thread. 

 

4. Wheel chocks were taken from the Zvezda Kit.

 

All the weapons, chocks, covers are detachable and are just press fit to the aircraft. 

 

For the snow I used Cotton and Baking Soda.

 

I hope You guys Like it. Do lemme know for all your suggestions and opinions so I improve in the Future. 

 

For the video, the initial bit is the making of the base. You can JUMP to 05:30 for the Aircraft assembly.

 

Enjoy and Cheers  . . . . 😉

2

 

3

 

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32

 

Edited by Adichau
Link to post
Share on other sites

Simple yet effective snow effects! How did you manage to make the missile pylons friction fit into the wings though?

Link to post
Share on other sites
1 hour ago, jesTer said:

Simple yet effective snow effects! How did you manage to make the missile pylons friction fit into the wings though?


Pylons Friction Fit . . .   Drill a smaller hole on the wing  . .  As in just big enough to take the locating pin of the pylon. . . . Works for all scales  IMHO . ..  🙂 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...