Manuel J. Armas S. Posted June 9, 2020 Share Posted June 9, 2020 https://www.eduard.com/eduard/aim-54c-phoenix-1-32.html?cur=2&listtype=search&searchparam=aim-54 I would like to buy this set, but, anyone know if this phoenix came with the correct size? Because their Phoenix 1/48 is 4mm short. Thanks. Quote Link to post Share on other sites
bushande Posted July 10, 2020 Share Posted July 10, 2020 I baught a set of both, the C and the A version and I must say, they are quite nice. The front conus is about 1mm short in comparison to Tamiyas iteration but that is compensated by an about 1mm longer backend with the short fins, i.e. length is just about the same as Tamiya or really unnoticably shorter than that, however it is abot 1mm smaller in diameter compared to Tamiya. I for one consider these differences in size practically unnoticable considering the large 1/32 scale. Quote Link to post Share on other sites
Manuel J. Armas S. Posted July 14, 2020 Author Share Posted July 14, 2020 On 7/10/2020 at 4:35 AM, bushande said: I baught a set of both, the C and the A version and I must say, they are quite nice. The front conus is about 1mm short in comparison to Tamiyas iteration but that is compensated by an about 1mm longer backend with the short fins, i.e. length is just about the same as Tamiya or really unnoticably shorter than that, however it is abot 1mm smaller in diameter compared to Tamiya. I for one consider these differences in size practically unnoticable considering the large 1/32 scale. Thanks a lot... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.