legend1 Posted January 4 Author Share Posted January 4 well before my dosis of covid i was working on this kit the AMK mig 31 B/BS it's time to back on track again ! no needs talk about the kit i have the metal undercarriage set from the same brand and i will use it i will do more photos tomorrow!!! cheeerss Quote Link to post Share on other sites
Sean F Posted January 5 Share Posted January 5 I've built that kit. It's a really great kit. The landing gear is very difficult to get right (at least it was for me). The instructions are a little vague because of the isometric view they supply. Dry fit a lot and make sure it all fits or you'll end up with some diagonal wheels! Quote Link to post Share on other sites
legend1 Posted January 5 Author Share Posted January 5 48 minutes ago, Sean F said: I've built that kit. It's a really great kit. The landing gear is very difficult to get right (at least it was for me). The instructions are a little vague because of the isometric view they supply. Dry fit a lot and make sure it all fits or you'll end up with some diagonal wheels! thanks very much for the tip! Quote Link to post Share on other sites
legend1 Posted January 6 Author Share Posted January 6 i did a lot of dry fit and the position of the gear legs looks ok to my eyes Quote Link to post Share on other sites
legend1 Posted January 12 Author Share Posted January 12 front wheel ready Quote Link to post Share on other sites
Sean F Posted Wednesday at 03:41 PM Share Posted Wednesday at 03:41 PM On 1/6/2021 at 4:05 PM, legend1 said: i did a lot of dry fit and the position of the gear legs looks ok to my eyes Looks good! Quote Link to post Share on other sites
legend1 Posted Thursday at 05:30 PM Author Share Posted Thursday at 05:30 PM On 1/13/2021 at 9:41 AM, Sean F said: Looks good! thanks Sean F Quote Link to post Share on other sites
Berkut Posted Friday at 10:40 AM Share Posted Friday at 10:40 AM Have you glued your landing gear on? Personally i would recommend leaving it off til after painting, weathering etc as it can get in the way and/or break off etc. I left the main landing gear completely off (it snaps in place so easy to put it on at any point really) and just installed the "stub" of front landing gear (part L28 and L49) and folded them into the bay. Atleast that was the case with my plastic landing gear parts for my BM build. 🙂 Hope you recovered well from your "dose" of covid... Otherwise, good progress so far on the build!👍 Quote Link to post Share on other sites
legend1 Posted 3 hours ago Author Share Posted 3 hours ago On 1/15/2021 at 4:40 AM, Berkut said: Have you glued your landing gear on? Personally i would recommend leaving it off til after painting, weathering etc as it can get in the way and/or break off etc. I left the main landing gear completely off (it snaps in place so easy to put it on at any point really) and just installed the "stub" of front landing gear (part L28 and L49) and folded them into the bay. Atleast that was the case with my plastic landing gear parts for my BM build. 🙂 Hope you recovered well from your "dose" of covid... Otherwise, good progress so far on the build!👍 hi berkut! i have only glued the front gear strut i have used the metal set from AMK ! thanks i 'm fully recovered just i got back to work so this days off i will get back on building Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.