Dog1 Posted March 18, 2021 Share Posted March 18, 2021 (edited) when applying clear coats my question is should i do it before mounting headlights transparent acrylic parts such as light covers , windscreen etc or can you go over everything ? Edited March 18, 2021 by Dog1 Quote Link to post Share on other sites
ElectroSoldier Posted March 18, 2021 Share Posted March 18, 2021 What are you using as a clear coat? Quote Link to post Share on other sites
Dog1 Posted March 19, 2021 Author Share Posted March 19, 2021 (edited) i decided to go ahead after placing the decals but not the chrome parts headlights etc since i have the intention of polishing later with Tamiya coarse fine and finish . I applied the first coat of mr super clear mr hobby and all was fine but after applying the second coat 1 hr later there are blotches of the clear coat on the surface and decals .How do i go about removing these blotches ? the paint color is semi black gloss . the model is the 1/12 Ford GT 40 Trumpeter 1966 Le man winner. Last coat applied 1 hr ago from this posting , cheers Edited March 19, 2021 by Dog1 Quote Link to post Share on other sites
RichardL Posted March 19, 2021 Share Posted March 19, 2021 Did you spray Mr. Hobby Super Clear from a spray can or from an airbrush? You can carefully remove those blotches with a Q-tip moistened with lacquer thinner. Might need to spray a light coat of clear over those areas again. Quote Link to post Share on other sites
Dog1 Posted March 19, 2021 Author Share Posted March 19, 2021 (edited) i used a spray can and the first coat looked great , an hour later i applied the second . I will apply your method and hope for the best . I just realized i sprayed the car with Tamiya acrylic semi gloss black since the surface was large and then i used Mr Color gloss spray, does it matter ? i mean is gloss spray finish for any color acrylic or lacquer ? Edited March 19, 2021 by Dog1 Quote Link to post Share on other sites
RichardL Posted March 19, 2021 Share Posted March 19, 2021 5 minutes ago, Dog1 said: i mean is gloss spray finish for any color acrylic or lacquer ? Yes, as long as the semi gloss black has sufficient time to cure, say at least a couple of days. Here is how I always spray gloss coats, albeit from an airbrush: lay down a very light tacky first coat, wait five minutes, lay down a medium second coat, wait five minutes, lay down the wet final coat. To me, an hour is too long of a wait before applying the second coat. Quote Link to post Share on other sites
RichardL Posted March 19, 2021 Share Posted March 19, 2021 Here is an example of Mr. Color GX100 Super Clear airbrushed over Tamiya acrylic XF-1 flat black using the method outlined above: It is extremely smooth and glossy, as evidenced by the sharp reflections from the three overhead lights. If flat black can be made this smooth and shiny, then it should be easier to do the same to semi gloss black. Quote Link to post Share on other sites
Dog1 Posted March 20, 2021 Author Share Posted March 20, 2021 (edited) From spray can to airbrush If i want to finish the body work for the remaining unpainted primed external parts with the airbrush using semi gloss black from Mr Color will that show differences between the parts altready painted with the tamiya spray can once joined together to complete the build ? what is a good cheap lacquer paint remover for cleaning plastic droppers and paint plastic trays for after work clean up ? Edited March 20, 2021 by Dog1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.