MA Cooke Posted April 9, 2021 Share Posted April 9, 2021 (edited) Having moved the "Aces High" Spitfire to the "completed" category, like a young child anxious with anticipation and unable to sleep on Christmas Eve, I dove into this one head-first. I've ordered Fightertown's 48083, and purchased the A model "H" sprue. Also pending is the Eduard A model IP's plus PE seatbelts. All I can say so far is....WOW. I have got to add 2 or maybe 7 more of these to my stash. Edited April 11, 2021 by MA Cooke Title Change Quote Link to post Share on other sites
crackerjazz Posted April 9, 2021 Share Posted April 9, 2021 Following along. Where'd you purchase the H sprue from? Quote Link to post Share on other sites
MA Cooke Posted April 9, 2021 Author Share Posted April 9, 2021 42 minutes ago, crackerjazz said: Following along. Where'd you purchase the H sprue from? ebay....seller had several individual sprues for sale. Apparently I need sprues "K" and maybe "N" as well from the A kit....not sure what I'm gong to do about the IP hoods, though, short of just buying the entire A/M cockpit (Eduard makes one). (I did just order another Tamiya D, that's how enthused I am about this one so far. I woke up at 3:15 unable to sleep, itchin' to get back to my workbench.) Quote Link to post Share on other sites
MA Cooke Posted April 11, 2021 Author Share Posted April 11, 2021 So I got started, and WOW! I mean WOW! And my Fightertown decals, and Eduard IP's came yesterday. Thank you Brian Plescia! I still have to figure out the front IP (hood) cover. (Don't know it's official name, under the windscreen area....) Quote Link to post Share on other sites
crackerjazz Posted April 11, 2021 Share Posted April 11, 2021 Nice! Those pre-painted parts make light work of cockpit preparation, don't they. It's one of the stages I always dread. What did you need to figure out about the hood cover -- the color? Quote Link to post Share on other sites
MA Cooke Posted April 11, 2021 Author Share Posted April 11, 2021 1 hour ago, crackerjazz said: Nice! Those pre-painted parts make light work of cockpit preparation, don't they. It's one of the stages I always dread. What did you need to figure out about the hood cover -- the color? Not so much the color - but how different are the two between the A (or A+, B) and the D models? I found sprue H for the Tamiya A kit, but I was told that I'd need another sprue for the correct hood. Wondering how much the rivet counters will explode if I use the D kit's hoods.... Quote Link to post Share on other sites
crackerjazz Posted April 12, 2021 Share Posted April 12, 2021 Ok I see what you mean. I'm looking at the Daco book and they're all different so it looks like you'll have a little chopping to do : ( Does Eduard have the B? The HUD can probably be scratchbuilt. Quote Link to post Share on other sites
MA Cooke Posted April 12, 2021 Author Share Posted April 12, 2021 9 hours ago, crackerjazz said: Ok I see what you mean. I'm looking at the Daco book and they're all different so it looks like you'll have a little chopping to do : ( Does Eduard have the B? The HUD can probably be scratchbuilt. You lost me at "scratchbuilt." Quote Link to post Share on other sites
MA Cooke Posted April 13, 2021 Author Share Posted April 13, 2021 11 hours ago, crackerjazz said: Ok I see what you mean. I'm looking at the Daco book and they're all different so it looks like you'll have a little chopping to do : ( Does Eduard have the B? The HUD can probably be scratchbuilt. Good 'nuff for guh'ment work. The hood/cover from the D kit plus B panel from Eduard. I'm 52, I just lost two PE seatbelts....there's only so much I'll fuss and fuss. I either have to fight to paint molded-in seatbelts, or fiddle with PE and have them go "ZING!" off into empty space. Quote Link to post Share on other sites
crackerjazz Posted April 13, 2021 Share Posted April 13, 2021 (edited) What year F-14B are you depicting? - 2003 article about the new Sparrowhawk HUD the F-14B's were getting. I've been looking at DCS F-14B vids and none of them have the new HUD, so maybe you're good using an F-14A cockpit if you're doing older pre-2003 F-14Bs? - This pic shows an F-14B with the new HUD under a red cover - a real time saver : ) But the RIO's screen is square : ( (I guess they go hand-in-hand?) - An old discussion here. - And the DCS F-14B - A Britmodeller thread (not much about the HUD but great F-14B reference nonetheless) Edited April 13, 2021 by crackerjazz Quote Link to post Share on other sites
MA Cooke Posted April 13, 2021 Author Share Posted April 13, 2021 (edited) 4 hours ago, crackerjazz said: What year F-14B are you depicting? 2002. That's a lot of info - thank you!! Edited April 13, 2021 by MA Cooke Quote Link to post Share on other sites
Brian P: Fightertown Decals Posted April 13, 2021 Share Posted April 13, 2021 For the 2002 VF-143 jets, they were pre-Sparrowhawk HUD. So it had the standard A coaming. The B pilot panel had a different instrument cluster on the upper right. But using the A panel is good enough if you’re happy with it. The RIO panel has the Lantirn PTID display snd left side hand controller. had coaming as the A. Up to you as far as how detailed you want to get. Phase Hangar makes the parts. You could cut out the PTID from a D and add it to the A panel. You could put a square piece of plastic over the kit A TID Fishbowl and and sides. You could use a Eduard piece - just depends on how accurate you want to get. While it’s a bit different, you could use the D left side panel with the hand controller. Or use the A part and add a stick. Quote Link to post Share on other sites
MA Cooke Posted April 13, 2021 Author Share Posted April 13, 2021 4 hours ago, Brian P: Fightertown Decals said: For the 2002 VF-143 jets, they were pre-Sparrowhawk HUD. So it had the standard A coaming. The B pilot panel had a different instrument cluster on the upper right. But using the A panel is good enough if you’re happy with it. The RIO panel has the Lantirn PTID display snd left side hand controller. had coaming as the A. Up to you as far as how detailed you want to get. Phase Hangar makes the parts. You could cut out the PTID from a D and add it to the A panel. You could put a square piece of plastic over the kit A TID Fishbowl and and sides. You could use a Eduard piece - just depends on how accurate you want to get. While it’s a bit different, you could use the D left side panel with the hand controller. Or use the A part and add a stick. Thanks Brian. I just said "heck with it" as far as combining Eduard panels and hoods/glare shields, and just bought the PH Late A/Late B cockpit upgrade set. Quote Link to post Share on other sites
Brian P: Fightertown Decals Posted April 13, 2021 Share Posted April 13, 2021 For the pilot one, you can just use the stock A. Change the top right instrument cluster of you want. I did decals for it on the Fightertown data sheet. Use the PH RIO parts. Boom, done. Quote Link to post Share on other sites
MA Cooke Posted April 13, 2021 Author Share Posted April 13, 2021 4 minutes ago, Brian P: Fightertown Decals said: For the pilot one, you can just use the stock A. Stock A what......hood/glare shield? I don't have that, I have the D kit, and one sprue (H) from an A kit. Sorry to be so dense. Quote Link to post Share on other sites
MA Cooke Posted April 14, 2021 Author Share Posted April 14, 2021 I haven't decided if these go in "The Tomato" or Dog 100. Aires resin seats with Eduard prepainted PE. (The belts came with an A-model IP set, and I lost one of the Aires belts.) The shoulder belts will be shaped and secured once the anchor point under the headrest dries. Quote Link to post Share on other sites
phantom Posted April 14, 2021 Share Posted April 14, 2021 Put it in which ever canopy does not close the best. Then you can have one open one closed. Quote Link to post Share on other sites
MA Cooke Posted April 14, 2021 Author Share Posted April 14, 2021 1 hour ago, phantom said: Put it in which ever canopy does not close the best. Then you can have one open one closed. Honestly, I've had so much grief with The Tomato (Hasegawa kit) that I'm about THIS FAR (fingers almost in a pinch position) from putting some form of cover inside (or maybe over) the canopy, to hide the disaster inside (and save the good seats for another build). Quote Link to post Share on other sites
MA Cooke Posted April 21, 2021 Author Share Posted April 21, 2021 Again, I'm absolutely STUNNED at how the Tamiya D is just falling together. I did make a couple goofs - assembled fan onto intake ducts, then installed those BEFORE I masked and painted the forward intake sections. D'oah! Other than that....incredibly smooth. This is a couple nights ago....I'm masking sub-assemblies so the glue has bare plastic to weld. Quote Link to post Share on other sites
MA Cooke Posted April 25, 2021 Author Share Posted April 25, 2021 Black primer is on, got some marbling on the upper surface done - still need to do more randoms on the underside. The marbling pic is WAY overexposed. Sorry. Quote Link to post Share on other sites
crackerjazz Posted April 25, 2021 Share Posted April 25, 2021 Very cool! Was it the 1500 grade Mr. Surfacer primer that you used? Quote Link to post Share on other sites
MA Cooke Posted April 25, 2021 Author Share Posted April 25, 2021 22 minutes ago, crackerjazz said: Very cool! Was it the 1500 grade Mr. Surfacer primer that you used? Yes. Quote Link to post Share on other sites
MA Cooke Posted April 25, 2021 Author Share Posted April 25, 2021 23 minutes ago, crackerjazz said: Very cool! Was it the 1500 grade Mr. Surfacer primer that you used? And I wasn't too meticulous about covering every single square mm of the surface - with all the marbling and tonal variations (guess which modeling site I got THAT from?), I figured it ultimately wouldn't matter. Quote Link to post Share on other sites
MA Cooke Posted April 25, 2021 Author Share Posted April 25, 2021 (edited) OK, a few pics NOT blown out. I did a lot of light ghost grey (36375) last night, covered many of the rear fuselage panel lines, then applied maskol. After re-watching Doog's vid on the basics of black basing, I re-primed in black. Since the upper fuselage will see some fading due to sun exposure, I marbled with dark ghost grey (36320), and also applied some of the dark to the undersides. It seems the undersides get quite dirty, so I'll also do some marbling with medium grey (35237) there. I raided a Hasegawa A+ kit for the TCS chin pod, but could only find one half. I've ordered the Quickboost resin pod, and as of now the forward fusealge is only ~ 80% primed in black. I'm finally getting the hang of low pressure (13 to 15 psi) and really thinned paint (I start at 2:1 thinner to paint, then add drop by drop until it works.) Edited April 25, 2021 by MA Cooke Quote Link to post Share on other sites
crackerjazz Posted April 25, 2021 Share Posted April 25, 2021 (edited) You're a marbling pro! : ) Have you found out why your black primer kept clogging up your nozzle yet? I was thinking it was because it wasnt 1500 but some coarser grade. Edited April 25, 2021 by crackerjazz Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.