Bomber101 Posted June 17, 2021 Share Posted June 17, 2021 For this kit, do the fuselage halves need to be cemented together? Most of the instructions do not say whether parts should be cemented, only some show do not cement, such as the trapeze/bomb swing release mechanism on the fuselage centerline. On that note, does the headrest part also need cementing? Should I assume everything that does not have the “do not cement” sign be cemented together? Quote Link to post Share on other sites
Cubs2jets Posted June 17, 2021 Share Posted June 17, 2021 I'd say your assumptions are correct. C2j Quote Link to post Share on other sites
admiralcag Posted June 19, 2021 Share Posted June 19, 2021 I'm building this kit at the moment. Be careful as you glue the fuselage together. Some parts move (tail hook, bomb trapeze, bomb release button). Vern Quote Link to post Share on other sites
BrockyTaz Posted July 4, 2021 Share Posted July 4, 2021 Hi Bomber101, Yeah that's the problem with the newer Revell pictograph instructions... Anybody remember when the instructions had actual descriptions of the steps as well as drawings? This is why I go to scalemates.com to see if they have an older set of instructions... If you go to the link below you'll be able to download a set of instructions from the 1970s Monogram version of the kit. circa 1970 Monogram instructions The link above shows this as bandi-monogram kit so sometimes it takes a little poking around but most of the time I have found better instructions than what I had in the kit. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.