hooter Posted August 10, 2021 Share Posted August 10, 2021 Looking good, dai phan. Those Fundekal sheets are superb, although I used Xtradecals for my P - 38., I did use Fundekals for my F -102A Delta Dagger, and they went on no problem at all. I think they must be one of the best researched sheets, and they're worth it just for the instruction sheets alone.😀 Quote Link to post Share on other sites
No.11 Posted August 13, 2021 Share Posted August 13, 2021 Looking good! Quote Link to post Share on other sites
dai phan Posted August 17, 2021 Author Share Posted August 17, 2021 (edited) Howdy modelers...  Applied the gloss coat. I use the excellent Intermediate Gauzy Agent that gives a very tough and nice shine. It does not affect the NMF and in fact makes it stands out more! I use the Eduard P-38 Super Charger (much more detailed) and I had to do some sanding to get the back portion to fit. The forward portion I did not use because it is oversized. Dai   Edited August 17, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted August 18, 2021 Author Share Posted August 18, 2021 (edited) Hello everyone...  Started to decal last night. The decal is by Exito and it is very good. Thin but tough. Solvaset has no effect because the decal snugs down so well already that there is nothing else for the solution to do. I notice an error in the kit while trying to make everything symmetrical. That is the air intake on the right boom has a more forward tilt than the left side. I wondered why the right and left decals do not appear to be symmetrical and that is when I found out. Tonight will be the application of the stencils. Dai  https://modelingmadness.com/scott/decals/exito/ed48009.htm    Edited August 18, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted August 22, 2021 Author Share Posted August 22, 2021 (edited) Hello everyone...  Ready to apply the gloss coat pior to wash and weathering. I applied only a few stencils as they tend to be out of scale. In real life the stencils are hardly seen if standing 30 feet away. Dai   Edited August 22, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted August 26, 2021 Author Share Posted August 26, 2021 (edited) Hello my dear fellow modelers...  Gloss coat applied (only over decals) and weathering. I am not a fan of stencils as they tend to be over scaled. Dai  Edited August 31, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted August 31, 2021 Author Share Posted August 31, 2021 (edited) Greetings everyone...  Start to focus on bringing out the panel lines tonight. My weathering skill is abysmal at best so I will keep the airframe midly weathered. I use Tamiya panel liner, Vallejo and Flory Model washes. Once this is done will start with paint chipping. Dai    Edited August 31, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted September 5, 2021 Author Share Posted September 5, 2021 (edited) Hello everyone...  The wash and weathering is done. I now need to install the canopy and the V shape antenna. Dai   Edited September 5, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted September 5, 2021 Author Share Posted September 5, 2021 (edited) Yo all...  The antenna is installed. Next will be the clamp shell canopy installation. For a life of me I cannot get the seat head rest not to interfere with the rear canopy unless I do some trimming to get it to sit lower. Unheard in this Tamiya kit but I could not see where I went wrong. Regardless the trimming is undetectable because it is way underneath the seat. I am going to see if I can buy a small diameter tube (.5mm) for the antenna routing as it exits out of the rear canopy. Dai    Edited September 5, 2021 by dai phan Quote Link to post Share on other sites
dai phan Posted September 5, 2021 Author Share Posted September 5, 2021 (edited) My Tamiya P38G is finished. As usual here are my takes...  PROS: 1. The best P38 in 1/48 scale. 2. Excellent fit of parts. In fact the tolerance is so tight that I had to look for the seams so I can apply the cement. 3. Excellent enginnering. Parts fall together on the panel lines. 4. Very detailed cockpit and wheel bays.  CONS: 1. Decal seat belts. For this level of a kit, offering decal seat belts is rather comical. 2. Small sink marks noted on the right rudder and left wing tip. 3. Decals to simulate the holes on the machine guns. Laughable at best so the guns are best replaced with after market offerings. 4. The right outside air intake has a slighty more forward tilt than the left. Unless I am wrong they should be the same. 5. Propeller assembly could be better. No need for multiple parts that makes painting more difficult.  Overall an enjoyable project. No hair pulling, cussing, heavy drinking like my previous Roden T28 project. I like the kit so much that I bought the limited P38H edition. If you think about getting into this hobby, buy this kit because this is what modelling is all about. Dai     Edited September 5, 2021 by dai phan Quote Link to post Share on other sites
BuNo02100 Posted September 5, 2021 Share Posted September 5, 2021 Looks good, I have one in the stash and made some notes on what you encountered so I will be on the look out for the same. Â Thanks for posting Quote Link to post Share on other sites
dai phan Posted September 6, 2021 Author Share Posted September 6, 2021 3 hours ago, BuNo02100 said: Looks good, I have one in the stash and made some notes on what you encountered so I will be on the look out for the same.  Thanks for posting There are things you need to watch out for. The 2 side window panels (with NO STEP decals) should be left unpainted of the bottom half. When installed on the plane, the clear lower half should be seen. I made the mistake of painting the whole thing and installed all the way down rather than half way. Pay attention to the radio gear assembly so the headrest does not interfere with complete seating of the rear canopy. I had to do some trimings to lower the head rest.  With such well engineered kit, I am sure something I did wrong. The tolerance of the parts are so tight that the seams (panel lines) can disappear on you. Use extra thin cement very sparingly or the panel lines will be lost. Replacing the kit guns is a must. Dai Quote Link to post Share on other sites
AlienFrogModeller Posted September 7, 2021 Share Posted September 7, 2021 Looks great!  Cheers  AFM Quote Link to post Share on other sites
Mr.Happy Posted September 8, 2021 Share Posted September 8, 2021 Very nicely done.  Mr.Happy Quote Link to post Share on other sites
dai phan Posted September 9, 2021 Author Share Posted September 9, 2021 An interesting note would be the offering by Hobby Boss P-38L in 1/48 scale. There is not much information on the Net despite many on the Academy and Hasegawa's releases. Even the old Monogram has more attention. I think that is due to many errors HB kit suffers and modellers shy from it. Tamiya realizes the shortcomings of what are available then hits on the nail with this offering. In my 48 years of modeling, this Tamiya P-38 is the most well engineered kit I have ever built. Dai Quote Link to post Share on other sites
Flight Line Media Posted September 9, 2021 Share Posted September 9, 2021 Nice work! Quote Link to post Share on other sites
dai phan Posted September 10, 2021 Author Share Posted September 10, 2021 (edited) Greetings everyone...  Did some additional work before going to the display case. The tolerance of the gun bays is so tight that the seams (panel lines) dissapeared under a coat of paint. I hate rescribing because one mistake you have to fill, sand, prime and paint again. I found an alternative which can provide a decent outcome short of rescribing. I mark the panel lines with scribing tape then use smallest ink pen to draw the lines. Then with a cotton bud sparingly dipped in acrylic thinner, I went over the lines to soften them as well as giving a "post shading" look. Then again mask the lines again and with a very small brush I placed some paint chips. After the tape is removed you have the paint chips along the straight edge to give an impression the chips are along the panel lines. Seal everything with a flat clear coat. The result is not as perfect as rescribing but an acceptable alternative in my view. The result looks much better on the model than in the photo posted here. Unless I tell you, you would pass the ink pen panel lines as a recessed one. Dai  Edited September 10, 2021 by dai phan Quote Link to post Share on other sites
Jamie Cheslo Posted September 10, 2021 Share Posted September 10, 2021 1 hour ago, dai phan said: Greetings everyone...  Did some additional work before going to the display case. The tolerance of the gun bays is so tight that the seams (panel lines) dissapeared under a coat of paint. I hate rescribing because one mistake you have to fill, sand, prime and paint again. I found an alternative which can provide a decent outcome short of rescribing. I mark the panel lines with scribing tape then use smallest ink pen to draw the lines. Then with a cotton bud sparingly dipped in acrylic thinner, I went over the lines to soften them as well as giving a "post shading" look. Then again mask the lines again and with a very small brush I placed some paint chips. After the tape is removed you have the paint chips along the straight edge to give an impression the chips are along the panel lines. Seal everything with a flat clear coat. The result is not as perfect as rescribing but an acceptable alternative in my view. The result looks much better on the model than in the photo posted here. Unless I tell you, you would pass the ink pen panel lines as a recessed one. Dai  Agreed. I would never have been able to tell those are not recessed panel lines. I thoroughly enjoyed your build. Picked up a couple of extra techniques as well. Thanks so much for taking the time to share such a detailed build with the techniques! She deserves a special place in your display case!  Quote Link to post Share on other sites
Flight Line Media Posted September 10, 2021 Share Posted September 10, 2021 Looks great! Quote Link to post Share on other sites
Totalize Posted October 9, 2021 Share Posted October 9, 2021 Nice stuff. I like this one. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.