B-ONE27 Posted September 24, 2021 Share Posted September 24, 2021 Like title says, if anyone has one of these hard to find kits, let me know. Like to keep this CONUS, due to hefty shipping cost. Quote Link to post Share on other sites
dustiepal Posted September 25, 2021 Share Posted September 25, 2021 https://www.luckymodel.com/scale.aspx?item_no=HSG 07432 Quote Link to post Share on other sites
B-ONE27 Posted September 25, 2021 Author Share Posted September 25, 2021 Thanks Dustiepal, I should've been more precise, however I'm looking for the example with the updated sugar scoop exhaust...not sure but from researching I don't think this kit or the Korean version has the updated exhaust. Quote Link to post Share on other sites
Dave Williams Posted September 25, 2021 Share Posted September 25, 2021 You can see the instructions for all 3 of the kits here. https://www.1999.co.jp/eng/search?typ1_c=102&cat=&state=&sold=0&sortid=0&searchkey=1%2f48+ah-64e Only 07414 has the upturned exhausts. Quote Link to post Share on other sites
arnobiz Posted September 25, 2021 Share Posted September 25, 2021 2 hours ago, Dave Williams said: You can see the instructions for all 3 of the kits here. https://www.1999.co.jp/eng/search?typ1_c=102&cat=&state=&sold=0&sortid=0&searchkey=1%2f48+ah-64e Only 07414 has the upturned exhausts. Yeah, and this one is basically impossible to find 😞 I'd like to do one too, so I'm thinking about making the exhausts myself. Would anyone be interested in an official BAM models release? Quote Link to post Share on other sites
B-ONE27 Posted September 25, 2021 Author Share Posted September 25, 2021 (edited) 4 hours ago, arnobiz said: Yeah, and this one is basically impossible to find 😞 I'd like to do one too, so I'm thinking about making the exhausts myself. Would anyone be interested in an official BAM models release? Yes sir, Id absolutely be interested in a set of exhausts! As you mentioned finding that boxing of the Echo with upturned exhausts is like finding a unicorn. Edited September 25, 2021 by B-ONE27 Quote Link to post Share on other sites
Falcon053 Posted September 25, 2021 Share Posted September 25, 2021 7 hours ago, arnobiz said: Yeah, and this one is basically impossible to find 😞 I'd like to do one too, so I'm thinking about making the exhausts myself. Would anyone be interested in an official BAM models release? For sure I'd be interested in you doing them. I was really, really lucky to find a boxing of a Hasegawa E kit, but if you built it, I'd be ordering. Quote Link to post Share on other sites
B-ONE27 Posted September 26, 2021 Author Share Posted September 26, 2021 5 hours ago, Falcon053 said: For sure I'd be interested in you doing them. I was really, really lucky to find a boxing of a Hasegawa E kit, but if you built it, I'd be ordering. How much you want for it? Quote Link to post Share on other sites
Stephen Posted September 26, 2021 Share Posted September 26, 2021 20 hours ago, arnobiz said: Yeah, and this one is basically impossible to find 😞 I'd like to do one too, so I'm thinking about making the exhausts myself. Would anyone be interested in an official BAM models release? Yes! Quote Link to post Share on other sites
Bo105flyer Posted September 26, 2021 Share Posted September 26, 2021 Yes, Please do! I have that kit but would like to convert one of my other kits with the "Sugar Scoop Exhaust" Steve Sliger Greenwell Springs, LA Quote Link to post Share on other sites
arnobiz Posted September 26, 2021 Share Posted September 26, 2021 (edited) I'll look into it then 🙂 The product development pipeline is pretty full right now but it will come at some point, probably early next year 🙂 I'm also planning on doing a AH-64WAH / AH-64DAH conversion set by the way, I've always wanted to build an hellenic Apache 😉 Edited September 26, 2021 by arnobiz Quote Link to post Share on other sites
arnobiz Posted September 27, 2021 Share Posted September 27, 2021 OK I got a little excited by this project and started working on it so it may come sooner than expected 🙂 The set will cover only the aft part of the engine (the forward part is the same so the excellent kit parts can be used) and will most likely by in two parts: the exhausts themselves on the one hand, the external cover on the other hand to make painting easier. Quote Link to post Share on other sites
B-ONE27 Posted September 28, 2021 Author Share Posted September 28, 2021 17 hours ago, arnobiz said: OK I got a little excited by this project and started working on it so it may come sooner than expected 🙂 The set will cover only the aft part of the engine (the forward part is the same so the excellent kit parts can be used) and will most likely by in two parts: the exhausts themselves on the one hand, the external cover on the other hand to make painting easier. That's just outstanding customer service! Thank you Sir, I can patiently wait but in the meantime I'll order a AH-64D/E kit to have on hand...oh and some caracal decals too! Quote Link to post Share on other sites
hawkwrench Posted September 28, 2021 Share Posted September 28, 2021 Any chance you can make the upturned exhausts for the 1/35 Kitty Hawk's H-60's??? Tim Quote Link to post Share on other sites
arnobiz Posted September 28, 2021 Share Posted September 28, 2021 6 hours ago, B-ONE27 said: That's just outstanding customer service! Thank you Sir, I can patiently wait but in the meantime I'll order a AH-64D/E kit to have on hand...oh and some caracal decals too! Happy to please, the Caracal decals are too exciting to ignore - they just need the ASPI exhausts to make it possible to build the shark mouth schemes 🙂 5 hours ago, hawkwrench said: Any chance you can make the upturned exhausts for the 1/35 Kitty Hawk's H-60's??? Tim Not likely in the short term as I don't have this kit 😕 Quote Link to post Share on other sites
dthank Posted September 28, 2021 Share Posted September 28, 2021 Count me in for a set or two! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.