Jump to content

KopeckyScaleModels "news topic"


Recommended Posts

  • 1 month later...
Hello all. Please let me introduce you new products for November.
32020 1/32 F-15C Centerline pylon TAMIYA
32021 1/32 F-15E Centerline pylon TAMIYA
32022 1/32 F-15C Early Pylons + Rails (Tamiya)
48006 1/48 Lau-129 (4pcs for F-16)
48008 1/48 F-15C Centerline pylon GWH
48009 1/48 F-15E Centerline pylon GWH
48010 1/48 F-15C Pylons + rails (LAU-114) GWH
All of them you can find on www.kopeckyscalemodels.com
Please welcome and thank you!
 
32020 1/32 F-15C Centerline pylon TAMIYA
U0BVBHv.jpg
32021 1/32 F-15E Centerline pylon TAMIYA
9fqPeZS.jpg
32022 1/32 F-15C Early Pylons + Rails (Tamiya)
7fnJkF1.jpg
48006 1/48 Lau-129 (4pcs for F-16)
n4xyxFB.jpg
48008 1/48 F-15C Centerline pylon GWH
NBHcclY.jpg
48009 1/48 F-15E Centerline pylon GWH
OvcXOQT.jpg
48010 1/48 F-15C Pylons + rails (LAU-114) GWH
mmdfpMW.jpg
Link to post
Share on other sites
4 hours ago, ElectroSoldier said:

Is it possible to adapt these rails and put them on the Tamiya 1/48 F-15C? Or does the kit already come with LAU-114 rails?

Hello. Not sure... Don´t know 1/48 Tamiya kit. About fitting: the "worst" thing you will have to do, is gently sand down the fitting surface...

This set is about adding details:

ruTRgjX.jpg

sJ0QlN3.jpg

 

Link to post
Share on other sites

Thanks Brad.

 

One more new item for November : 32019 Rafael Python 4/5. I will finally receive decals in start of next week. It´s last piece to puzzle. So first Pythons can be send in the middle of next week. Set including 2 pcs of Rafael Python 4/5 AA missile. 3D printed front end cover, clear lens and decals printed by Eduard. Plase welcome to www.kopeckyscalemodels.com Thank you!

 

1pXIGFa.jpg

DnoEy9Y.jpg

QMD9eSf.jpg

OGGcW14.jpg

wJlfg1Z.jpg

Link to post
Share on other sites
  • 1 month later...

Here's an idea: the old 1:32 Tamiya F-4s have terrible canopy frame interiors (i.e., no interior detail at all). I'm not aware that anyone has ever done accurate replacements--doing it with resin would be problematic because of shrinkage issues. But, with 3D printing, it might be worth revisiting the issue.

Link to post
Share on other sites
1 hour ago, mrvark said:

Here's an idea: the old 1:32 Tamiya F-4s have terrible canopy frame interiors (i.e., no interior detail at all). I'm not aware that anyone has ever done accurate replacements--doing it with resin would be problematic because of shrinkage issues. But, with 3D printing, it might be worth revisiting the issue.

https://aerocraftmodels.bigcartel.com/product/mcdonnell-douglas-phantom-replacement-canopy-set-for-tamiya-kits

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...