Trooper111 Posted January 3, 2022 Author Share Posted January 3, 2022 I also got the instrument panel to fit decently enough. It'll need the shroud extended up and over it a bit but the AMT "glass" doesn't interfere with it and that is the best part. Don't mind the missing seat... courtesy of fat fingers Quote Link to post Share on other sites
Trooper111 Posted January 3, 2022 Author Share Posted January 3, 2022 Wife went to work, kids doing their own thing left me time to put some paint down on this. it'll still get more details such as connector ends, wire bundle clamps and perhaps a few more shades thrown in but most of it will be overshadowed by the raised nose so magnifying glass ready it is not. Quote Link to post Share on other sites
Dutch Posted January 3, 2022 Share Posted January 3, 2022 (edited) Very nice progress, Trooper! Love the cockpit detail! I need to take notes from you when my B-52G gets on the bench. Edited January 3, 2022 by Dutch Quote Link to post Share on other sites
Benner Posted January 12, 2022 Share Posted January 12, 2022 definitely watching this build, very nice work. It's inspiring me to continue on my 1:72 B-52 I started years ago. Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 A bit of progress since I last up dated here. I have pretty much completed the cockpit area and as much as I would like to do more, It's all just going to be lost once I put the canopy on it. I have placed it on, and you can see some of the detail I've added but not going to go crazy here. Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 Obviously I have glued the fuselage together and got things lined up pretty straight and flush where needed. You can see a bit of the wrinkled skin effect in these pictures. I'm sure once I get a coat of paint on the fuselage and start with the different shading, the wrinkles will show better. Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 (edited) I added thin sheet plastic to represent the EWO's & Gunners hatch detail that got sanded away while making left and right fuselage fit correctly Edited February 13, 2022 by Trooper111 Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 (edited) I filled in the gaps from cutting off the nose radome and fitting the Blackdog resin piece in it's place. It still needs to be blended in with a wash of black where I just painted over the bondo today but I'm sure everything will get some bit of a wash as this plane is not pristine. I also got the EVS turrets Installed after cutting off the "rotating area's" of the FLIR and LLTV. Edited February 13, 2022 by Trooper111 Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 Also got the tail gun turret hollowed out enough to accept the jackets of the .050 cal machine guns that will fit into those jackets next. I'll glue and bondo it on within the next few days. I played around with the length of the barrels sticking out and asked a couple regulars on here approximate length and this was a happy medium. Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 I am still undecided on conventional or nuclear. I will have to decide soon because the monogram pylon will need to have its curvature adjusted to fit onto the AMT wing. Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 Lastly, Blackdog provides nothing about how to attach the lowered flaps to the flap tracks. I made small tabs that will be on the underside and when painted not noticeable from above. The engines are just slid onto their slots for now and will be glued and bondo'd at the appropriate time. That's all for now...More progress as progress happens. Quote Link to post Share on other sites
uncarina Posted February 13, 2022 Share Posted February 13, 2022 Really nice progress! Cheers, Tom Quote Link to post Share on other sites
Trojan Thunder Posted February 13, 2022 Share Posted February 13, 2022 Looks great, just catching up again and the cockpit and nose detail is excellent 🏆 Quote Link to post Share on other sites
A-10 LOADER Posted February 13, 2022 Share Posted February 13, 2022 Very nice progress so far. She seems to be quite the challenge especially with all the mods your doing to her. Steve Quote Link to post Share on other sites
Trooper111 Posted February 13, 2022 Author Share Posted February 13, 2022 One could build AMT's kit straight out of the box and you would have a decent B-52. However, Having first hand contact with them while in the USAF, I can still smell and see them in my brain. I am not trying to "over modify" this buff, just correcting blatant flaws that were overlooked by AMT and others who build it when they were molded back in the day. Quote Link to post Share on other sites
Thadeus Posted February 15, 2022 Share Posted February 15, 2022 Very nice project. AMT Buffs do look nice. But there are so many articles on the net pointing out the errors, one has to put an effort not to find them and build it oob. Well, it kind of did it for me. I almost got myself the Italeri B-52H. Love the used skin marks on the fuselage. Gonna look awesome! Quote Link to post Share on other sites
Trooper111 Posted February 15, 2022 Author Share Posted February 15, 2022 Thank you for your kind remarks...Its slow progress with life going on between model sessions but I'll get there and that's part of the fun. Not trying to rush thru a model just so one can say "done" and start/complete another just as fast. Quote Link to post Share on other sites
Dutch Posted February 21, 2022 Share Posted February 21, 2022 On 2/12/2022 at 10:14 PM, Trooper111 said: Also got the tail gun turret hollowed out enough to accept the jackets of the .050 cal machine guns that will fit into those jackets next. I'll glue and bondo it on within the next few days. I played around with the length of the barrels sticking out and asked a couple regulars on here approximate length and this was a happy medium. Sweet! Where did you get the barrels? I've got to do it too! Quote Link to post Share on other sites
Da SWO Posted February 21, 2022 Share Posted February 21, 2022 My vote is for the nuke loadout. 😁 Quote Link to post Share on other sites
Trooper111 Posted February 21, 2022 Author Share Posted February 21, 2022 Dutch Sir, I bought the .050 machine gun barrels from said Brothers mail order in Missouri.. This one package is for a B-17... so afterwards you'll have six left over for another project if you don't drop one or two to the carpet monster. I started with a teeny tiny drill bit and started the holes, the worked my way until the jacket fit snugly...they are not glued in yet though. The same company makes one for the 20mm rotary cannon if you do a pre-bobbitized H model.... Trooper Quote Link to post Share on other sites
Trooper111 Posted February 21, 2022 Author Share Posted February 21, 2022 Da Swo, TheI further I get along, the more I'm leaning to the ALCM pylon .... however... Having been PRP certified and know to well about the no lone zone while the plane has nuclear weapons on board... When this model is done... and if I go alcm's, The nose radome will be up, crew entrance door open. If their was that much maintenance needed back in the day, they would have un-cocked the plane...so a little bit of fictitious work going on here but it's easier and will fit sooooo much better than the Monogram pylons onto the AMT wings. Quote Link to post Share on other sites
Trooper111 Posted April 30, 2023 Author Share Posted April 30, 2023 Finally able to get back to B-52g 59-2594 Memphis Belle III as she was just before she departed Eaker AFB, Arkansas in 1992. It's been way too long since I've been able to do anything to this model. I have completed a couple other models between then and now so I mandated this is my "Next up" (Continued Model). I still have a long way to go before I call this one complete but... I've painted the RAM (Radar Absorbent Material) around the ALQ-172 Antennas as it was in real life and began making the ALQ-155 Belly Antennas. Slow process having to make 10 of them and the other assorted antennas that are so noticeable on B-52's. I have the Pitot tubes to form, shape and attach after the antennas are complete but I'm getting ahead of myself. The plane is painted now but needs touch-ups and additional weathering done as well. Here are a few pics so far. I didn't want to add too much "DC-200" soaked through onto the belly panels as of yet, but I can always add more. Quote Link to post Share on other sites
Trooper111 Posted April 30, 2023 Author Share Posted April 30, 2023 A bit more today while the kids were playing and my wife is working. I added the UHF antennas on top of the fuselage, The rest of the antennas I had built yesterday plus a couple from today. Last two are of the ALR-20 Scimitar antenna between the front landing gear. Quote Link to post Share on other sites
A-10 LOADER Posted April 30, 2023 Share Posted April 30, 2023 Looking good, she's coming together now. Steve Quote Link to post Share on other sites
Gator52 Posted April 30, 2023 Share Posted April 30, 2023 Trooper, great to see this one moving again! Really like all the antennas, makes a big difference. Chris Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.