GeneK Posted August 14 Share Posted August 14 From FineMolds -- getting closer to Sep release: Gene K Quote Link to post Share on other sites
Craig Baldwin Posted August 25 Author Share Posted August 25 Sprues are starting production along a with the owner of FineMolds, Kunihiro Suzuki, presented in an interview, talking about the kit. CC into English does a not bad translation. Quote Link to post Share on other sites
ya-gabor Posted September 1 Share Posted September 1 As it was possible to expect from the brake down of parts the two seater F-15 is to follow the first releases. Late this year there should be a modernized F-15DJ with a USAF F-15D close after that. But early next year a real F-15C should also be boxed. I know it should be in another topic but in spring next year a Thunderbirds F-4E should be released also with a F-4D to follow. Best regards Gabor Quote Link to post Share on other sites
Miramar Road Posted September 1 Share Posted September 1 Wow, Fine Molds is wasting no time with Eagles. DXM just released some decals for all sorts of wild JASDF aggressor DJ camo schemes so this is very timely. Good to see the USAF Eagles as well! Hopefully they also have the Israeli Baz lined up for next year as well with some CFT's. Quote Link to post Share on other sites
Milo Posted September 5 Share Posted September 5 (edited) I really don't need any more F-15s. But I don't think I'll be able to resist at least one. Or two... Edited September 10 by Milo Quote Link to post Share on other sites
GeneK Posted September 6 Share Posted September 6 On 9/5/2023 at 6:03 AM, Milo said: ... I don't think I'll be able to resist a least one. Or two... Don't hesitate to get your pre-order in [for your 3+ kits] since these, like their Phantom variants, will be going fast! Gene K Quote Link to post Share on other sites
hemspilot Posted September 7 Share Posted September 7 On 9/6/2023 at 8:53 AM, GeneK said: Don't hesitate to get your pre-order in [for your 3+ kits] since these, like their Phantom variants, will be going fast! Gene K Done last month at Plaza Japan. Quote Link to post Share on other sites
Milo Posted September 10 Share Posted September 10 On 9/6/2023 at 7:53 AM, GeneK said: Don't hesitate to get your pre-order in [for your 3+ kits] since these, like their Phantom variants, will be going fast! Gene K I get the distinct impression that you're both the angel and devil on my shoulders agreeing and high-fiving! Quote Link to post Share on other sites
GeneK Posted September 11 Share Posted September 11 On 9/9/2023 at 11:45 PM, Milo said: I get the distinct impression that you're both the angel and devil ... So you can place your orders in a timely manner: The J model is scheduled to ship 25 Sep, followed by the MSIP on 16 Oct according to FM website. The Formation Light and Chaff/Flare dispensers will also be shipped on 25 Sep. Shops like HLJ and Hobby Search will normally have them in stock within two - three days after shipping. If Stop Order is now in effect, those shops will normally receive more than reserved, so the opportunity is there to get the kits -- if one moves fast. Gene K Quote Link to post Share on other sites
Mr Matt Foley Posted September 16 Share Posted September 16 On 4/21/2023 at 6:18 PM, joeltc said: I can't fully tell from this angle. But it looks like they got the omega profile correct. I sure hope so, otherwise we'll never hear the end of it. Quote Link to post Share on other sites
clumsy Posted September 26 Share Posted September 26 Gents, Please be prepared: https://www.1999.co.jp/eng/10977144 Quote Link to post Share on other sites
GeneK Posted September 27 Share Posted September 27 On 9/26/2023 at 4:33 AM, clumsy said: https://www.1999.co.jp/eng/10977144 HLJ still has 4 .... at a better price: https://www.hlj.com/1-72-scale-jasdf-f-15j-fighter-hot-scramble-1984-initial-specification-fnmfp50 Gene K Quote Link to post Share on other sites
Craig Baldwin Posted September 29 Author Share Posted September 29 (edited) As a side note " [Color announced at the All Japan Model Hobby Show ② ] Two new colors have been added to Mr. Color's airplane colors! Two FS colors available for current US military aircraft. Edited September 29 by Craig Baldwin Quote Link to post Share on other sites
Miramar Road Posted September 30 Share Posted September 30 I got a good look at the FM F-15's on display at the show today. They look awesome. Cockpit detail especially looks fantastic, including the avionics bay behind the pilot's seat. The fuselage components breakdown is very well-thought out, especially for ease of painting. They even had the USAF F-15C out. Even though the display model didn't have them, they had a sprue showing the USAF MSIP antenna mods molded into the parts for the font fuselage section. I can't wait to get my JASDF MSIP kit next month. I got the Nano Aviation formation lights set which will dress up the airframe nicely. The only negative is that the HUD parts are a bit on the thick side. Thankfully, I got some PE parts to use there. These kits are definitely a step up from the GWH and Platz kits. Quote Link to post Share on other sites
JackMan Posted September 30 Share Posted September 30 On 8/8/2023 at 12:03 AM, Craig Baldwin said: @GeneK First look, quite close. The Eagle ladder has eight rungs vs 7. The rear rail looks a bit taller to make it over the intake and a slight steeper angle of the cockpit frame. So relatively small adjustments for a 3D file? I once made my own F-4 Phantom ladder by using the F-15 one from the old Hasegawa pilot/crew set: https://www.1999.co.jp/eng/image/10000497 What I did was saw off the last rung at the bottom ( to make it 7 rungs). Then , to address the rear rail being taller ( as what Craig mentioned), I used a lighter to soften the back of the front rail, then push it downwards & slightly forward to make it shorter than the rear rail. Wasn't perfect but it worked. I wish I could locate it now ( I seemed to have misplaced it someplace) so that I could upload a photo of it. But yeah, I agree with Gene. I'd rather have a ladder included in the Phantom kit. Hasegawa included it in their decades old 1/72 F-16s, Mirage F-1 & Sea Harrier, so I don't see why FM can't do it now. Quote Link to post Share on other sites
GeneK Posted October 1 Share Posted October 1 19 hours ago, JackMan said: I once made my own F-4 Phantom ladder by using the F-15 one from the old Hasegawa pilot/crew set: https://www.1999.co.jp/eng/image/10000497 Thanks, as usual, JackMan. I had forgotten about the ladder being included in that set, so will have to pull it out to play with it per your mod! Gene K Quote Link to post Share on other sites
JackMan Posted October 1 Share Posted October 1 You're welcome, Gene! Though, thinking about it now, instead of a lighter, I think it's better to use the heat from an incense stick or a heated screwdriver or something. Back in the day, I had steadier hands, so I used a lighter. Actually, your query made me look up what's on the market: https://www.hannants.co.uk/product/LP72005?result-token=p6PoY https://www.hannants.co.uk/product/ED72448?result-token=p6PoY https://www.hannants.co.uk/search/index.php?product_category_id=&product_division_id=&manufacturer_id=&code=&product_type_id=&scale_id=&keyword_search=Phantom+ladder&setPerPage=25¤cy_id= I don't quite fancy the PE ones but the 3D printed ones look alright. But again, I do wish manufacturers like Finemolds would include them. Quote Link to post Share on other sites
GeneK Posted October 5 Share Posted October 5 Here's another interesting video from the head of FineMolds giving his views on the forthcoming two seaters, both Japanese and US. Among other things, he points out differences in models. The Closed Captioning in US language is very good: Outstanding to see/hear directly from the big boss, something not usual from other kit makers. Gene K Quote Link to post Share on other sites
GeneK Posted October 10 Share Posted October 10 For those with Silhouette cutters, I posted canopy masks for the single seaters here. I also posted an svg for folks with other cutters or those who want to trace/cut manually. Unfortunately the excellent Scale Models Paint Mask site is not well known, but hopefully with the increasing number of cutter owners, traffic (and subsequently uploads) will increase. A great modelling resource with so much potential ... . Gene K Quote Link to post Share on other sites
Craig Baldwin Posted October 11 Author Share Posted October 11 15 hours ago, GeneK said: For those with Silhouette cutters, I posted canopy masks for the single seaters here. I also posted an svg for folks with other cutters or those who want to trace/cut manually. Unfortunately the excellent Scale Models Paint Mask site is not well known, but hopefully with the increasing number of cutter owners, traffic (and subsequently uploads) will increase. A great modelling resource with so much potential ... . Thank you Gene, a great job. Very useful for which I believe will be the go-to Eagle kit in 1/72. Mine arrived a few days ago and no disappointments here. Quote Link to post Share on other sites
Craig Baldwin Posted November 11 Author Share Posted November 11 My current bench project is the F-15J J-MSIP by FineMolds. Test fitting and gluing in progress. I have found detail and fit excellent throughout. Three two minor areas are the top of the intakes with sink marks, filling sanding in progress with Mr Surfacer. On the forward fuselage, aft lower end are some seams requiring blending, with the left side needing slightly more blending. Future releases seem possible with locating divots on the side of the intakes for the fairing as seen in the final photo. Good information can be found here https://thaimilitaryandasianregion.wordpress.com/2017/02/05/mitsubishi-f-15j-japan/ Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.