UH-1Mad Posted February 1 Share Posted February 1 Still baffles me there is no decent UH-1D/H in 1/35 so that is still my vote Quote Link to post Share on other sites
Rob Mignard Posted February 1 Share Posted February 1 I’d like to see the following in 1/48: A decent OH-13S (you can’t make an OH-13S from the Italeri kit) plus any other H-13’s in 1/48 Kellett XR-8 Hiller OH-23G Hughes TH-55/Hughes 300 Sikorsky HH/CH-3E New Tool UH-1C Sikorsky H-19 Quote Link to post Share on other sites
Stephane HERVE Posted February 2 Share Posted February 2 In 1/48 or 1/35: NH90 PUMA Cougar Caracal MH47 In 1/35 CH46 Quote Link to post Share on other sites
aircommando130 Posted February 2 Share Posted February 2 MH-53J/M Pave Low MH-47 HH-3E Quote Link to post Share on other sites
JohnEB Posted February 3 Share Posted February 3 (edited) On 2/1/2024 at 3:19 PM, Rob Mignard said: I’d like to see the following in 1/48: A decent OH-13S (you can’t make an OH-13S from the Italeri kit) If you are referring to their 1:48 kit, Why not? Isn't the kit of a 47G-3B? (long tailboom, two deep oval fuel tanks, curved skids)? If so, it should be correct for an "S". The kit certainly isn't correct for a Korean War H-13D/E despite what the 1:72 box says. Nor it it correct for a Civil G or G-2. There is no S available in 1:35 scale. The MRC kit builds a Korean War-era 47D-1, H-13D/E while the Revell kit builds a circa 1955 47G-2, H-13H...or with the engine from the MRC kit, a straight G, H-13G. Edited February 3 by JohnEB Correct information Quote Link to post Share on other sites
Rob Mignard Posted February 3 Share Posted February 3 (edited) 18 hours ago, JohnEB said: If you are referring to their 1:48 kit, Why not? Isn't the kit of a 47G-3B? (long tailboom, two deep oval fuel tanks, curved skids)? If so, it should be correct for an "S". The kit certainly isn't correct for a Korean War H-13D/E despite what the 1:72 box says. Nor it it correct for a Civil G or G-2. There is no S available in 1:35 scale. The MRC kit builds a Korean War-era 47D-1, H-13D/E while the Revell kit builds a circa 1955 47G-2, H-13H...or with the engine from the MRC kit, a straight G, H-13G. The OH-13S is closely related to the 47G-3; the Italeri kit however mostly resembles a 47G-3B-1. What's the difference? The OH-13S has a cabin width of 56"; the B-1 has a cabin width of 63". This is accurate for the Italian AB-47 G3 and the British AH.1; but not for the S model. If you look at photographs of an S model and an AH.1 the difference is very noticeable. Basically, the S model has a "two seat" cabin and the AH.1 has a "three seat" cabin. The kit cabin (and therefore the bubble) are too wide to depict an S model and the bubbles are actually a different shape. There's really no way to easily fix this. I assume Italeri, being an Italian company, chose to use their AB-47 G3 as the base of their kit. Then there's the scale 4.5" tube diameters. There are a myriad of other errors; some easy to fix; some not. I've got many hours flying Bell 47's; they're one of my favorite helicopters. Edited February 4 by Rob Mignard Quote Link to post Share on other sites
JohnEB Posted February 4 Share Posted February 4 (edited) I haven't built my Italeri kit yet, so I didn't realize its errors. My Bell book says the narrow cabin is 55 inches. I agree with your comments, but in 1: 48th, a 8" difference in cabin width is 1/6th of an inch, so it isn't that big of a deal. As I pointed out, at least you have the correct tail boom, engine and fuel tanks. In checking my four Bell books, I see some of the "S"s had the small 43 gal. tanks, but by the time they reached Vietnam they had the 60 gallon units. The Augusta (and UK Agustas assembled by Westland) were basically off the shelf civil ships and as you say had the more "blown" canopy. You are probably correct about them using a Augusta version as a model. And given the fact military models rule the market, it is no surprise it ended up as a U.S. Army S. But given they pawn off a G3 as a Korean War ship, selling a G3-B1 as a G3 is small potatoes! Having been to model shows, I doubt if 99% of IPMS judges would notice the errors. I don't mean to minimize the differences you pointed out, but as someone who waited most of his life for any 47 kit to become available, I'm just grateful that the errors you noted as as small as they are. My 47 time is in a D-1, straight G, and an hour or so in a G-2....never got to fly one of the big engine G-3s. Allow me to recommend "The Bell 47 Helicopter Story" by Robert Petite and Jeff Evans. Graphic Publishers, 2013. It us well worth its high price for the comparative model charts. 731 pages. Edited February 4 by JohnEB Quote Link to post Share on other sites
Rob Mignard Posted February 4 Share Posted February 4 1 hour ago, JohnEB said: I haven't built my Italeri kit yet, so I didn't realize its errors. My Bell book says the narrow cabin is 55 inches. I agree with your comments, but in 1: 48th, a 8" difference in cabin width is 1/6th of an inch, so it isn't that big of a deal. As I pointed out, at least you have the correct tail boom, engine and fuel tanks. In checking my four Bell books, I see some of the "S"s had the small 43 gal. tanks, but by the time they reached Vietnam they had the 60 gallon units. The Augusta (and UK Agustas assembled by Westland) were basically off the shelf civil ships and as you say had the more "blown" canopy. You are probably correct about them using a Augusta version as a model. And given the fact military models rule the market, it is no surprise it ended up as a U.S. Army S. But given they pawn off a G3 as a Korean War ship, selling a G3-B1 as a G3 is small potatoes! Having been to model shows, I doubt if 99% of IPMS judges would notice the errors. I don't mean to minimize the differences you pointed out, but as someone who waited most of his life for any 47 kit to become available, I'm just grateful that the errors you noted as as small as they are. My 47 time is in a D-1, straight G, and an hour or so in a G-2....never got to fly one of the big engine G-3s. Allow me to recommend "The Bell 47 Helicopter Story" by Robert Petite and Jeff Evans. Graphic Publishers, 2013. It us well worth its high price for the comparative model charts. 731 pages. I too have waited a very long time for a decent OH-13. To me, the difference is too much to ignore (I really don't care what the IPMS judges know or don't know; but you're right, they wouldn't know the difference {I've been waiting for years for them to figure out the differences between the A, B, and C model Hueys}). I've made a jig to build a new fuselage and tail boom using .020 to .035" plastic rod. I'm also working on a mold to make a new bubble and cabin. If you'd like a copy of the stuff I've found that needs addressing, PM me and I'll send you a copy. I also have a goodly amount of detail photographs of G models that I can share. Mig Quote Link to post Share on other sites
josefgarcia69 Posted February 5 Share Posted February 5 On 2/2/2024 at 10:58 AM, Stephane HERVE said: In 1/48 or 1/35: NH90 PUMA Cougar Caracal MH47 In 1/35 CH46 in 1/48th scale for me, please, added to (sorry, have to say it again) the CH-54 in 1/48th. And since we are at it, also a CH-37 Mojave in 1/48th. Have a good one. JFG. Quote Link to post Share on other sites
Dutch Posted February 7 Share Posted February 7 Most wanted 1/72 & 1/144 scale in no particular order are: CH/HH-3E/F Jolly Green Giant / Pelican HH-52A Seaguard S-92 Helibus / CH-148 Cyclone / VH-92 Patriot HH-43B/F Husky AH-56A Cheyenne Quote Link to post Share on other sites
YF65_CH53E Posted February 13 Share Posted February 13 As a long time rotorhead I would have to go with these: 1/48th: CH-53A/D - new one, not the Revell kit, its ok, but a new one would great MH-53J PAVE LOW III - if you do a 53A/D you can easily do some extra sprues and release a good PAVE CH-37 Mojave HH/CH-3 H-19 1/35th: CH-53E - they did the CH-54, so why the heck not!!!!! Gy Dan Quote Link to post Share on other sites
cruiz Posted February 14 Share Posted February 14 On 2/12/2024 at 7:03 PM, YF65_CH53E said: 1/48th: CH-53A/D - new one, not the Revell kit, its ok, but a new one would great That wouldn't be fair; I almost finished to buy all the crap available to detail mine😅. On a serious note, that would be a great idea, and as you say, a base kit could also serve for the PaveLow and Yasur variants with some extra parts. Quote Link to post Share on other sites
Drifterdon Posted May 15 Author Share Posted May 15 1/48 HH-3E Jolly Green Giant Quote Link to post Share on other sites
Rotorman Posted May 15 Share Posted May 15 Gazelle 1/32 or 1/35 Quote Link to post Share on other sites
Brad-M Posted May 16 Share Posted May 16 1/48 CH-148 Cyclone for me please. Quote Link to post Share on other sites
Tank Posted May 16 Share Posted May 16 On 2/14/2024 at 5:44 PM, cruiz said: On 2/12/2024 at 8:03 PM, YF65_CH53E said: 1/48th: CH-53A/D - new one, not the Revell kit, its ok, but a new one would great That wouldn't be fair; I almost finished to buy all the crap available to detail mine😅. That is how the modeling gods work. They demand someone start building a subject and then grant an end to your pain and suffering with a new release. So start building so we can thank you for your sacrifice. Quote Link to post Share on other sites
AD-4N Posted May 16 Share Posted May 16 On 5/15/2024 at 10:33 AM, Drifterdon said: 1/48 HH-3E Jolly Green Giant This is the way. Quote Link to post Share on other sites
cruiz Posted May 16 Share Posted May 16 9 hours ago, Tank said: That is how the modeling gods work. They demand someone start building a subject and then grant an end to your pain and suffering with a new release. So start building so we can thank you for your sacrifice. It could be, as you say, Tank; I believe I brought both Kinetic's and KittyHawk's Super Etendards a few years ago. Currently waiting for Isracast's new rotorhead. Quote Link to post Share on other sites
YF65_CH53E Posted May 27 Share Posted May 27 It is the way...... 😄 Quote Link to post Share on other sites
salvador001 Posted June 28 Share Posted June 28 1/35 UH-1D/H 1/35 Bell Jet Ranger/58A or C 1/35 TH55/300 1/35 Bell 412 1/35 UH-1Y 1/35 OH-6/500 series If i got to chose only one it will be the Huey of course! Rod. Quote Link to post Share on other sites
Drifterdon Posted August 2 Author Share Posted August 2 On 5/15/2024 at 10:33 AM, Drifterdon said: 1/48 HH-3E Jolly Green Giant Keeping this out there! Quarter scale Jolly Green please!!!!! Quote Link to post Share on other sites
GeejeeZ Posted August 2 Share Posted August 2 Guys, guys, guys. This thread is getting boring...😉 I get sick and tired of people that want a kit that is already available but it's a D instead of an A+, or the existing kit is not good enough. Or it's in 1/32 instead of 1/35. You guys just don't seem to know how lucky you are, you spoiled little brats!!!😫 Now, here come the real drama of some models that just are not there: Bell 214ST Sikorsky S-92 AW 139 Airbus H155 Bell 206 L MD600N And oh yeah: never mind the scale: any scale would make me happy... 😞 Quote Link to post Share on other sites
Drifterdon Posted August 4 Author Share Posted August 4 If this thread is boring you, ignore it. Simple as that. Quote Link to post Share on other sites
JohnEB Posted August 4 Share Posted August 4 On 8/2/2024 at 6:41 AM, GeejeeZ said: Guys, guys, guys. This thread is getting boring...😉 I get sick and tired of people that want a kit that is already available but it's a D instead of an A+, or the existing kit is not good enough. Or it's in 1/32 instead of 1/35. You guys just don't seem to know how lucky you are, you spoiled little brats!!!😫 Now, here come the real drama of some models that just are not there: Bell 214ST Sikorsky S-92 AW 139 Airbus H155 Bell 206 L MD600N And oh yeah: never mind the scale: any scale would make me happy... 😞 Good luck with that list. Most if those are obscure or civilian. The Bell 214ST is the forgotten footnote of the Huey family, so rare I don't think I've seen one in person. Let's face it, helicopters are the stepchildren if the modeling world. And kits of civil types are practically unheard of. I will agree with your one point, if there is a 1/35 B/C (or D/H) Huey, we should be happy with it and not press our luck wanting a better kit or one with a specific upgrade. There are too many types I'd like to see get their FIRST kit rather than have multiples of the same variant in one scale. On 8/2/2024 at 6:41 AM, GeejeeZ said: Quote Link to post Share on other sites
Bo105flyer Posted August 4 Share Posted August 4 Bell 214ST, that was a big helicopter with rotor blades that were as wide as barn doors the saying went. The company I flew for back in 1988, Petroleum Helicopters Inc. (PHI) had 3 of them in operation. During a particular maintenance flight the aircraft had to be at a certain gross weight range so I got to go up in one. What always amazed me was the width of the main rotor blades. As one maintenance technician said to me, those babies are as wide as a barn door. I used to think the rotor bkk on adds on the Marine Corp AH-1W Cobras were wide but the ones on the 214ST made them look small. Steve Sliger Greenwell Springs, LA Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.