BearBiologist Posted March 7, 2023 Share Posted March 7, 2023 Hi, new member here. Need advice for a quick glue for resin figures from China. Tried Testor's Mr. Cement, Krazy Glue and others . Nothing seems to hold together. Any udeas?? Thanks, BTW! Quote Link to post Share on other sites
pigsty Posted March 7, 2023 Share Posted March 7, 2023 Superglue (cyanoacrylate) is most people's option for resin. Small amounts of strong PVA would do it too, though they wouldn't be as permanent. Quote Link to post Share on other sites
Charlie D. Posted March 7, 2023 Share Posted March 7, 2023 5 minute epoxy would also work! Quote Link to post Share on other sites
Drifterdon Posted March 7, 2023 Share Posted March 7, 2023 Cyanoacrylate (superglue) is all I use for resin. Just make sure your part is lined up and in place before you apply. In my experience it tends to be permanent. Quote Link to post Share on other sites
ExchefAndy Posted March 8, 2023 Share Posted March 8, 2023 As above, I've put together quite a few resin figures as large as 1/6 scale. I usually drill and pin first then superglue or milliput for he join. Hope that helps! And welome to ARC!!! Andy Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.