spejic Posted August 14, 2023 Share Posted August 14, 2023 I dipped a canopy in Tamiya Clear and it looks fantastic except that a large bit of dust landed on it. Is there a good way to fix that? I've removed clear from clear parts before using alcohol, but it makes the clear parts foggy. Quote Link to post Share on other sites
Helmsman Posted August 15, 2023 Share Posted August 15, 2023 Have you tried polishing clear parts afterwards? Just an idea. Quote Link to post Share on other sites
viper730 Posted August 19, 2023 Share Posted August 19, 2023 Windex will work. Also Mr. Leveling Thinner is safe on clear parts. Quote Link to post Share on other sites
goondman Posted August 20, 2023 Share Posted August 20, 2023 Isopropyl alcohol works well too Quote Link to post Share on other sites
Chuck1945 Posted August 21, 2023 Share Posted August 21, 2023 On 8/18/2023 at 6:24 PM, viper730 said: Windex will work. Also Mr. Leveling Thinner is safe on clear parts. I’ve used Mr Color Leveling twice on clear parts that had inadvertently sprayed with Mr Color paints. In both cases the parts were slightly fogged afterwards but I’m not sure if the paint or thinner caused the fogging. Buffing and Future helped restore them. Quote Link to post Share on other sites
Keroburner89 Posted August 22, 2023 Share Posted August 22, 2023 Windex is the way to go, I find isopropyl fogs the clear parts for some reason. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.