Craig Baldwin Posted September 8 Share Posted September 8 I did search the threads in this forum but have not seen this. GWH shows this new kit and one of the post states-"will be listing in 2023". Check their Facebook page, it is an open page so no FB membership is required to view. https://www.facebook.com/Great.Wall.Hobby Quote Link to post Share on other sites
Guard Hog Posted September 8 Share Posted September 8 Thanks for sharing this. It looks like they have zeroed in on the details that no other manufacturer (except Monogram in the 1980s's!) has gotten right, namely the nose and the windscreen. Even the Academy kit, which looks pretty good, didn't quite get it in those respects. Quote Link to post Share on other sites
GeneK Posted September 8 Share Posted September 8 (edited) 3 hours ago, Craig Baldwin said: Check their Facebook page, it is an open page so no FB membership is required to view. What's the secret handshake to view an "open page" (I'm not a member so can't get in) ? EDIT: This link worked for me: https://www.facebook.com/story.php/?id=100038918276549&story_fbid=1024958702144729 The GWH kit has been brought up before in some of the "other" A-10 threads and here, but no info on the release date ... or details as you've shown. Most recent info I saw was that it was supposed to have been shown at the Sept hobby show in Japan. Gene Edited September 8 by GeneK Quote Link to post Share on other sites
lockheed2004 Posted September 8 Share Posted September 8 Info also found here: https://www.themodellingnews.com/2023/09/preview-great-wall-hobbys-new-tool-48th.html#more Quote Link to post Share on other sites
Curt B Posted September 8 Share Posted September 8 (edited) JUST saw this in the Modeling News this minute! I am so thrilled...this one of several new models I have been waiting for more details about, and now some of those details are finally here! WooHoo! i've been working (very, VERY slowly) on my Academy A-10C, while hoping that this promised GWH version would end up being reality, and possibly even better, though I must say I've been very happy with the Academy kit! I"m still going too finish my Academy airplane, as it looks really nice, and I've used the best aftermarket stuff, such as the Phase Hangar intake and exhaust for the engines. Maybe such aftermarket improvements for the GWH won't be needed...we will see!! From the first glance at the plastic parts, the intake fans look fabulously detailed, and even the depth of the fan inside the intake looks like it's going to be fine, without need for correction. Fantastic! The only disappointing thing I saw in the Modeling News article was a likely projected release date of early 2024, instead of the 2023 release that had been previously stated. I'm super happy this is really coming!! Edited September 8 by Curt B Added text. Quote Link to post Share on other sites
Mr Matt Foley Posted September 14 Share Posted September 14 This was on my "wish list" and I am very pleased to see that Great Wall has finally got on with a release. Awesome, and it will be mine, oh yes, it will be mine. Quote Link to post Share on other sites
phasephantomphixer Posted September 16 Share Posted September 16 Seriously wish they had made it 1/32 scale! Quote Link to post Share on other sites
Dave Williams Posted September 16 Share Posted September 16 Given the price of their 1/48 F-14s, I can’t imagine what a 1/32 GWH A-10C would cost. Even their 1/32 P-40B/Hawk 81 kits are over $200. Quote Link to post Share on other sites
phasephantomphixer Posted September 17 Share Posted September 17 Kit prices are up there for sure, and as you pointed out even this GWH Hog won't be cheap, but AM corrections and time to fix the Trumpeter (enlarged Tamiya kit) roach gets it in the same range. And I would rather pay the difference to save me the bench time. Then again, even this kit will need AM which would of course be carried into 1/32. Quote Link to post Share on other sites
taggor Posted September 17 Share Posted September 17 I am really happy to see GWH/Lion Roar come out with a 1/4 scale A-10C kit the same as Academy. Hopefully it wont be as pricey as the F-14B. My wish was to be able to make either an "A" or a "C" in one kit though. Guess I am still wishing for a "new tool" A version or a "combo" kit as I mentioned. Oh well, these new kits look fantastic. Quote Link to post Share on other sites
Buckmeister Posted September 17 Share Posted September 17 16 hours ago, taggor said: I am really happy to see GWH/Lion Roar come out with a 1/4 scale A-10C kit the same as Academy. Hopefully it wont be as pricey as the F-14B. My wish was to be able to make either an "A" or a "C" in one kit though. Guess I am still wishing for a "new tool" A version or a "combo" kit as I mentioned. Oh well, these new kits look fantastic. GWH has said they are doing an A-10A after the C. They don't have a history of putting multiple versions in one box, so I would not expect them to start doing that with the A-10. Quote Link to post Share on other sites
taggor Posted September 19 Share Posted September 19 On 9/17/2023 at 10:53 AM, Buckmeister said: GWH has said they are doing an A-10A after the C. They don't have a history of putting multiple versions in one box, so I would not expect them to start doing that with the A-10. Thanks for this info. That's great news. I will be looking foreward to the A version too. Quote Link to post Share on other sites
viperbite Posted September 30 Share Posted September 30 Another angle with less lens distortion. Quote Link to post Share on other sites
taggor Posted September 30 Share Posted September 30 (edited) Thanks for sharing! It looks great on first viewing. I hope the intake/exhaust for the cooling system was "missed" on this display build. Edited September 30 by taggor update Quote Link to post Share on other sites
VADM Fangschleister Posted September 30 Share Posted September 30 Looks pretty nice. Nice effort on the fan blades, something nobody else seemed willing to tackle to that level. Nose also looks really good. As "slow" as kit production is these days, the ones coming out seem to be setting a better standard. The old argument of them being in the money business and making kits that have a wide appeal still holds as they need to make money to stay in business. So the off-chances of seeing this quality in a 1AB1F2 Wifferdill is unlikely. Still Jonesing for the Trumpeter 1/32 F-106 they promised in 2003. :-/ Quote Link to post Share on other sites
Dave Williams Posted September 30 Share Posted September 30 I’m just happy that it looks like they got the intake at the right depth, which seems to be a problem for some companies who put the fan too far forward. Quote Link to post Share on other sites
Curt B Posted September 30 Share Posted September 30 1 minute ago, Dave Williams said: I’m just happy that it looks like they got the intake at the right depth, which seems to be a problem for some companies who put the fan too far forward. Absolutely!!! Phase Hangar did a great fix for the intake fan and outlet nozzle for the Academy A-10C, which I'm in the process of building, and they might do the same for the GWH kit, if needed, but I'd certainly rather that the kit is accurate. Quote Link to post Share on other sites
GeneK Posted October 1 Share Posted October 1 What's the "contraption" carrying the small bomblets shown to the left of the model? Gene K Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.