AnthonyWan Posted February 13, 2006 Share Posted February 13, 2006 Does anyone have one of these sitting around? I know Aviation Megastore has some, but want to see if anyone has one in the US or for a slightly lower price. PM me, Anthony Also, if anyone has 12 Squared's 1/144 EP-3E Conversion, also interested. Quote Link to post Share on other sites
AnthonyWan Posted February 13, 2006 Author Share Posted February 13, 2006 BUMP Quote Link to post Share on other sites
AnthonyWan Posted February 13, 2006 Author Share Posted February 13, 2006 bump Just looking for a store that carries it for something less than Aviation Megastore Think the kit was priced at about $45 when it came out Quote Link to post Share on other sites
J.C. Bahr Posted February 14, 2006 Share Posted February 14, 2006 Your best bet is probably going to be the Aviation Megastore if they do in fact have any in stock... as those kits became a pretty rare breed almost as soon as they were originally released due to the incident over in China. Quote Link to post Share on other sites
volzj Posted February 14, 2006 Share Posted February 14, 2006 Since I see from your location you are in New Jersey check Avenel Hobbies in Colonia. They had one last time I was in month or so ago. Quote Link to post Share on other sites
AnthonyWan Posted February 14, 2006 Author Share Posted February 14, 2006 Alright, will let you know how it goes. Quote Link to post Share on other sites
AnthonyWan Posted February 14, 2006 Author Share Posted February 14, 2006 NO luck at Avenel...guy thought i was crazy Quote Link to post Share on other sites
AnthonyWan Posted February 15, 2006 Author Share Posted February 15, 2006 The kit in question: Quote Link to post Share on other sites
DonSS3 Posted February 15, 2006 Share Posted February 15, 2006 (edited) Falcon did this in one of their "Triple" vac conversion sets. IIRC You get the lower APS-20 radome, the fairing that goes behind it and the canoe fairing for the upper fuselage. You are reduced to making your own airflow vanes (around the lower radome) and any other antennae from scratch. You also need to delete the mad boom and fill in the sonobuoy launch tube holes in the bottom of the fuselage. HTH Edited February 15, 2006 by DonSS3 Quote Link to post Share on other sites
AnthonyWan Posted February 15, 2006 Author Share Posted February 15, 2006 Where can I find one of those? Quote Link to post Share on other sites
DonSS3 Posted February 15, 2006 Share Posted February 15, 2006 I used to have a good website for Falcon, but can't seem to find it. Maybe try NKR (In Australia), Hannant's (UK) or Squadron (USA)? I did find this tho: http://www.72scale.com/aircraft/Lockheed/P-3.html Good luck. Quote Link to post Share on other sites
AnthonyWan Posted February 15, 2006 Author Share Posted February 15, 2006 (edited) Thanks a bunch :) Only one problem, Link doesnt work. Edited February 15, 2006 by AnthonyWan Quote Link to post Share on other sites
Trojan Thunder Posted February 15, 2006 Share Posted February 15, 2006 Anthony, Try this link: 72 Scale P3 Page I have the Falcon vac conversion, I got it from Hannants. Here is a link to their listing: Falcon EP-3 Ccnversion There is also a couple of OOP Superscale sheets out there for EP3s. Hard to find though I got one through trading forums here at ARC. Ray Quote Link to post Share on other sites
AnthonyWan Posted February 15, 2006 Author Share Posted February 15, 2006 Thanks Ray, will try to place an order with them sometime this week. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.