AIM-9M Sidewinder Stencils

[Hobbydecal]

I had drawn the line drawing of this missile 2 years ago.

And I had printed some data for the ARCer's F-14 GB.

Today I edit and add some lines and rivets and add the colors on the previous files.

Now I would release this set with 1/48 and 1/32 scale.

With one set, you can apply over 6 missiles and each sections and fins will have different serial numbers. ;)

I try to print these soon at latest by this year.

Fortunately I could have taken ROKAF KF-16 pictures during last two years and got this missile information too by subsidiary.

I did my best but experts are you not me.

If you have any advices or other things for this products, please let me know for more perfection. :lol:

To see profiles,

http://www.hobbydecal.com/picd/stxx062_p1_b.jpg

Good Luck!

From Kim

Edited September 10, 2006 by Hobbydecal

[Murph]

Kim,

European manufactured AIM-9M's have an additional brown stripe on the seeker section to identify the gas generator that moves the forward fins.

And here:

Regards,

Murph

Edited September 10, 2006 by Murph

[David Walker]

I'll very much look forward to the release of this sheet.

[wardog1]

I second or is it third it

[Hobbydecal]

Kim,

European manufactured AIM-9M's have an additional brown stripe on the seeker section to identify the gas generator that moves the forward fins.

Regards,

Murph

Thank you Murgh for your information.

I need add some more brown bands.

I see European 9M have no markings(green and red) on the safety pin area.

Good Luck!

From Kim

[Hobbydecal]

Thank you David and Wordog1 for your interesting.

I would add black markings for the LAU-128/129 pylons as our AIM-120 decals.

I tried to vary the name plate of each pylon markings but so small text make it be meaningless.

As follows

Good Luck!

From Kim