Jump to content

f5guy

Members
  • Content Count

    1,965
  • Joined

  • Last visited

2 Followers

About f5guy

  • Rank
    Full Blown Model Geek

Profile Information

  • Gender
    Male
  • Location
    Layton, Utah
  • Interests
    Tiger musky fishing! Oh yeah.... I build models too!

Recent Profile Visitors

13,840 profile views
  1. Hi again folks, I got the glass on as well as the nose cone. There's about 2 or 3 ounces of weight in the nose. As with my Eastern 737 build, I had to do a bit shimming with plastic card to fill in some of the gaps. One of the shims fell inside and I couldn't get it out. At one point it came to rest against one of the existing shims that I had already put in, so I quickly hit it with liquid glue, and glued it in place. Well at least it won't be rattling around in the fuselage now. It's the white rectangle just behind the rear pilot's window. Once the model is painted, you'll never kn
  2. Hi everyone, I got the lower wing fuselage section and wings on a few weeks back, and just like my Eastern -800, fit was not too great. It might have actually been worse on this kit. I had to add a length of Evergreen strip plastic at either end of the wing box section to help deal with a decent step(pic 1). Much filling, grinding, and sanding ensued. The cockpit was finished off and glued into the fuselage (pic 2). I didn't spend much time on the cockpit, as very little is visible once the canopy is on. Next up is getting the engines going. Stand by... Fred.
  3. Thanks for the kind comments Don! Being an 80's Monogram kit, it was definitely a bit of a fit pig, but with a lot of sanding, re-scribing, and a Black Box cockpit set, it came out pretty good. Thankfully we have the MUCH better AFV kit now. Take care, Fred.
  4. Hi Dutch, I saw Kursad's announcement regarding decals, but will likely just finish mine off with the kit decals, as they're in good shape, and I want to keep this build moving forward. Thanks! Fred.
  5. Very much so Dutch! Progress is being made. I just haven't had time to take a few pics yet, but will post soon. Thanks, Fred.
  6. Well..... I started the XB-70 kit about 4 years ago, but hit the wall with it with all of the endless grinding and sanding involved. I also knew that my gloss white painting skills were not up to such a challenge, so it got set aside as painting approached. Now that I've tackled the "Rat 55" 737-200 and Eastern 737-800 builds, I feel that my gloss white skills are now up to the task of finishing off the XB-70. So I suppose both 737 kits were guinea pigs of sorts 🤣 Fred.
  7. Thanks everyone for your very kind comments! Once I get the AMT XB-70 kit that I'm currently working on finished, I'll get going on either the Titan Models 757-200 or BPK 737-900 projects that I've already started build threads on. Look in on those if its anything that interests you. Thanks for your support 👍 Fred.
  8. Here's another pic from one of my Fallon photo shoots. I think you'd be good with any similar grey. Fred.
  9. Hi Don, Here's a pic of the inlet. It looks like maybe light gull grey, or similar? As for painting it.... if you're using the AFV kit part, all I can suggest is painting it very carefully 😂 If you're using the Quickboost set, it will likely be easier. As for colors of the jet that you posted a pic of in Dave Roofs VMFT-401 decals thread... I built an E in that same scheme a number of years ago using the info from a Twobobs sheet, and the colors were dead on. The colors I used were FS36495 for the light grey, FS36375 for the medium grey, and FS35237 for the darker gr
  10. Thanks everyone for your very kind comments everyone, and for tagging along on this extended build! Next up for me is to finish off a 72nd AMT XB-70 that I started awhile back. Then I'll get going on either the Titan 757-200 or BPK 737-900 conversion that I'm doing progress builds on. Thanks for tuning in, Fred.
  11. Huh.... I didn't know that they were born yet again. Thanks for posting this Jeff 😉 Fred.
  12. Hi folks, Well after nearly a year and a half of struggling with this build I'm calling her done. Lots of goofs, so it's definitely a three footer. However, it looks great in my display case. A link to the build thread is here: I definitely recommend the BPK 737 kits. Yes, they are challenging, but quite impressive when done, and also very rewarding. Thanks BPK for giving us something other than yet another teen fighter or Bf whatever that's already been done to death! Fred K.
  13. Alright everyone.... I'm calling this guy done! Overall I'm pretty happy with it, but it is DEFINITELY a three footer (looks good from three feet away or further). I made a ton of mistakes on this build, but was able to salvage things and learned a few new techniques in the process. The biggest headaches were that gloss white paint, and the decals. Thanks to this build though, I have come up with a workable system for doing large amounts of gloss white now. The decals.... well.... they're very tricky. They are laser printed by V1 Decals, and I'm not bagging on them at
  14. It's something that I generally try to avoid myself, but this time around I had to blend the nose colors into the decals, so some careful masking was in order. The next time that I have to do stripes on a big airliner model I will definitely be painting the stripes if possible! Lesson learned 😂 Agreed.... that Eastern scheme is a real classic! Fred.
  15. Thanks Dutch! It's getting there..... Maybe in another week I'll have it done if I can get some bench time 👍 Fred.
×
×
  • Create New...