1/32 Russian Missile Pylons, MiG-21/23 pylons now on the workbench Options

[Zactoman]

MiG-23 pylons are now on the workbench!
See pg.9 for pics.
Also coming soon, launch rails for the MiG-21 and 23 starting with single and dual Aphid rails.

MiG-21 Pylons are now available!


I will update this post as new pylons become available.

MiG-29 Pylons are available at www.Zactomodels.com!

Once again Alexander has mastered works of art...

I am also offering the APU-73 and APU-60 separately for those who wish to do alternate loadouts.


Su-27 Pylons are also available!

APU-73 and APU-470 mastered by Alexander.

For those that don't want to buy the full set I am offering the wingtip pylons separately.


For any of you that might have missed it, Alexander mastered a beautiful assortment of Russian missiles including the Aphid, Archer and variants of the Alamo missiles.
>>>Check them out here<<<



This post has been edited by Zactoman: Aug 11 2010, 05:40 AM

[Ghostkiller]

looking to good to be real

well when the ub canopy will be done I will have to to buy all the goodies at once

may I request something
could you possibly cast the rear stabilizator section ???

if you keep upgrading the trumpeter it will be the zactomodel kit soon

images of http://www.flanker.free.fr

[Zactoman]

Will you start a new topic to show us the pics of the canopies?

Yes, I will be starting a new 'in-progress' thread (here in the jet modeling forum) in the coming days.
I am currently busy pouring molds and casting parts so I still haven't actually re-started the canopies.
I have cleaned off my workbench though and I'm hoping to actually finish up a model ( ) in between things before diving too deep into the canopies.

may I request something
could you possibly cast the rear stabilizator section ???
if you keep upgrading the trumpeter it will be the zactomodel kit soon

You're not kidding about it almost being a full Zactomodels kit!
Sorry though, no plans to go so far as to replace the vert stabs (or horizontal either).
Gotta leave some things for the model makers out there to do themselves...

[Eastern]

Sorry though, no plans to go so far as to replace the vert stabs (or horizontal either).
Gotta leave some things for the model makers out there to do themselves...

Sure! It would be the easiest way out for fellow modelers - just glue together all Su-27/Mig-29 ZactoResinParts and...this is it! Great model's accomplished!
No, no, no... You guys should make at least a couple of details by yourself.
Cheers and happy modeling!
Alexander.

[Ghostkiller]

hello Guys
well ...you are right... we need to play around too
that is where the fun is acually


Chris glad to hear that the UB canopy will be back on the workbench soon !

[loftycomfort]

I have cleaned off my workbench though and I'm hoping to actually finish up a model ( ) in between things before diving too deep into the canopies.

So what do you plan on building? Is it gonna be one of the 1/32 kits your resin corrects? Or do you want to build something different to get your mind off of work? *cough*egg plane*cough*

Terry

[Zactoman]

So what do you plan on building? Is it gonna be one of the 1/32 kits your resin corrects? Or do you want to build something different to get your mind off of work? *cough*egg plane*cough*
Terry

Here's a hint:

[richter111]

umm you make a resin model of Gene Simmons tongue?

[loftycomfort]

double-you, tee, ef, was that? My best guess is some kind of a tongue, or a mermaid's tail.

Terry

[Firecaptain]

Genes Simmons tounge was not correct so Chris is doing a resin replacement........

Chris is there a difference between the UB and MKK canopies?

[Zactoman]

Genes Simmons tounge was not correct so Chris is doing a resin replacement........

Here's the answer:

More pictures here: Grrraaarr!!!

Chris is there a difference between the UB and MKK canopies?

Yes, the UB has the IRST on the center-line. On the Su-30 the 'glass' portion goes further forward and the IRST is located on the right side.
The UB has also got a complex railing system for a blind flying hood in the front seat.

[maXar]

Today has received a post parcel!



Excellent set!
Professional work!

Chris, Alexander - Respect and Uvazhuha!!!... ;-)


This post has been edited by maXar: Jan 29 2010, 12:13 AM

[secondparttohell]

Zactoman please make this in 1/32.
Only you can do it right, Trumpy will make serious shape mistake and ruin this bird.

[Zactoman]

Today has received a post parcel!

Excellent set!
Professional work!

Very happy to hear the parts arrived safely and that you like them!

Zactoman please make this in 1/32.
Only you can do it right, Trumpy will make serious shape mistake and ruin this bird.

Thanks for the vote of confidence but can you at least wait until it lands for the first time before expecting a kit?
Beautiful bird...I can't wait to have one in 1/32!


MiG-29 pylons are all ready to mold up. Pictures coming soon!

[secondparttohell]

Very happy to hear the parts arrived safely and that you like them!

Thanks for the vote of confidence but can you at least wait until it lands for the first time before expecting a kit?
Beautiful bird...I can't wait to have one in 1/32!


MiG-29 pylons are all ready to mold up. Pictures coming soon!

I am sure that I will be able to wait until it's released and hope that you release it, I am still a college student

[Tricose]

MiG-29 pylons are all ready to mold up. Pictures coming soon!

Alrighty - beginning to feel the loss of love for the Fulcrum again until I saw your post Chris

Tricose

[Ghostkiller]

Hello Chris

hope to see a ultimate full combo set for the mig 29 correction available then

The revell Mig 29 should be inbound soon I hope

[KRI76]

Zactoman please make this in 1/32.
Only you can do it right, Trumpy will make serious shape mistake and ruin this bird.

If we're wishing why not wish for something too cool to ever be produced:





/Kristian

[Rafael Winter]

Thanks for the vote of confidence but can you at least wait until it lands for the first time before expecting a kit?
Beautiful bird...I can't wait to have one in 1/32!

me too... me too... me too...

Rafael Winter

[Zactoman]

Back on topic

First MiG-29 pylons out of the mold:

Here the parts are pictured on the Revell wing.
To properly position them you will need to fill the existing mounting holes and drill new ones in the correct position. You will also need to remove an existing bump and replace it with the provided resin bump seen under the rear of the APU-73 (center pylon).
The extra bracket under the APU-470 is optional. It is only sometimes carried.

More pictures soon...

Today has received a post parcel!
Excellent set!
Professional work!
Chris, Alexander - Respect and Uvazhuha!!!... ;-)

Thank you maXar!

[Eastern]

Hi bro! Aha, you eventually cast them!
They look perfect! We've done a great job on that airframe to improve it's image and just a few steps left to have a completely new exact (ah well, at least 99% accurate ) resin copy of the real thing.
Cheers!
Alexander.