Katran
-
Content Count
59 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by Katran
-
-
My apologies. did not read carefully. But in my opinion, if a person has spent money on BAM Models, it is not a sin for him to buy these add-ons:
1 late type stabilizer http://metdetails.com/catalog/metalic-details/aircraft/148/mdr48105-ah-64-apache-tail-stabilizator-late-type
2 TADS/PNV System Late version http://metdetails.com/catalog/metalic-details/aircraft/148/mdr48106-ah-64-apache-tadspnv-system-late-version-hasegawa
3 M230 chainguns
http://metdetails.com/catalog/metalic-details/aircraft/148/mdr4883-m230-chain-gun
Well, the chassis and cockpit from Aires will do. -
-
I don’t agree there are other engine nacelles, AН-64D can be assembled E no
-
1 hour ago, polar bear said:
You makes my dream comes true.
Does the size differ from Tamiya’s? I have a plan to batch Hasegawa parts with Tamiya’s Kit.
I didn't let out on Tamiya due to the lack of such a model.
All the talk that Tamiya's model and Kinetics are the same is not true. They differ, an attempt to put my engine on Kinetic was not successful, there the difference in width goes by 0.75-0.8 mm. And I had to do everything from scratch for Kinetics.
Hasegawa had the same problem, so I made a set for her too. I change one part depending on the manufacturer.
Well, of course, the engine types also differ in details, and 132 are absolutely all new parts, alas, you cannot do with replacing a couple of parts.
You can try, but I will not do this advice, there is a trifle, but you will have to build up a little and it is not very critical, at the edges there is 0.5 mm along the edge, and everything fits exactly in height, you will not have to build up. -
Friends need help. I am looking for good photos of nacelle engines AH-64E APACHE GUARDIAN US ARMY. Hasegawa once released a limited edition version in 48th scale, which is now impossible to find. And their quality leaves much to be desired.
At one time I found cool photos on the net, but, alas, I can't find where they went.
I want to make them with high quality.
Help me please. -
1 hour ago, mrvark said:
Looks really nice! How much and where can they be purchased?
You can buy them exactly here:
https://www.hobbyeasy.com/en/category/AIR12345678/AC48U/maker/KAT.html
Or in these stores, if they order:
https://www.hannants.co.uk
https://the48ers.com
Or if you urgently need me directly. All other questions in a personal message. -
-
-
-
-
-
-
-
I would like to present to your attention my new set of the F110-GE-132 engine in 1/48 scale for the KINETIC F-16E / F Block 60 model.
There is very little information on this type of engine and it was given to me with great difficulty, but it seems that I took into account all the differences. I also want to say that all the parts here are new, I did not act like other manufacturers by changing the name of the old set, and nothing remained from the early modifications of the F110-GE-100/129 engine.
The afterburner is longer, the appearance of the nozzles has been changed, the inner nozzle blades have been corrected, new flame stabilizer and mixer, high pressure compressor bushing and outer part have been fixed.
-
2 hours ago, Da SWO said:
For sale?
Of course, you can directly or here
https://www.hobbyeasy.com/en/category/AIR12345678/AC48U/maker/KAT.html
https://the48ers.com/resins?manufacturer=1173 -
-
-
-
-
Hello my F110 engine kits came out
I would like to draw your attention to the fact that I did not release a unified set for all types of F-16, but specifically for each Bolk separately.
1. F110-GE-100 Block 30/40;
2. F110-GE-129 type 1 Block 50;
3. F110-GE-129- type 2 Block 50/50 +;
-
Just now, KEB said:
Just wondering if anyone here has ordered replacement sprues from AMK....I lost a part for my 1/48 Mig-31....sorry if you feel this sould be posted in General Discussion
Greetings, I know that AMK's policy is that they send spare parts to stores. Any store that works with AMK has a stock of spare parts. My advice is to try to contact the store where you purchased the model and talk it over with them.
-
Just now, agelos2005 said:
When we will be able to use PayPal?
For the purchase, please contact me directly in a personal message, we will discuss everything there. PayPal is. Oleg (KiRRey) still conducts all operations through me. In the future, he himself will start working directly. Edward (Katran)/
If you want to buy elsewhere, now the products are available at https://www.hobbyeasy.com/en/category/AIR12345678/AC48U/maker/KIRR.html.
In the near future it will appear in one more, but the sets have not been sent yet. -
Just now, agelos2005 said:
Cannot see the cockpit for F-4E
You will uncheck the "Don't show out of stock items" icon and see. that the kits have already been purchased. Dispersed quickly.
-
6 minutes ago, Rocketdrvr said:
Nice looking sets! Where do you purchase these from??
While you can buy from me directly, or here https://www.hobbyeasy.com/en/category/AIR12345678/AC48U/maker/KIRR.html
AH-64E Apache Guardian in 1/48 Scale
in Helicopter Modeling
Posted
Well, the phrase "need" was not specified in my post. And I absolutely disagree with you about TADS, in the kit it is absolutely not suitable for both modification "D" and "E". As for the rest, I may agree with you, this is not so critical for some modellers and the kit will make it possible to make a prototype similar to the one being assembled, but exactly similar.