Jump to content

Easy change Weapons using magnets


Recommended Posts

Hello,

Much time now i was thinking how could i changed weapons to aircrafts without having them glued.

I bought from ebay these things (i dont know any of these sellers)

https://www.ebay.com/itm/1Pcs-Pure-Iron-Foil-Fe-Thin-Sheet-0-05mm-x-100mm-x-1000mm/122741024995?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

https://www.ebay.com/itm/50pcs-Strong-Mini-Round-Cylinder-Bar-Magnets-2-2mm-Rare-Earth-Neodymium-N35/142337616633?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

https://www.ebay.com/itm/100pcs-1mm-x-1mm-N50-Round-Super-Strong-Disc-Rare-Earth-Neodymium-Magnets/311759808302?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

 

so for the example i used an old 1/48 aircraft....

i cut the thin IRON foil with scissor 

1LcnzXp.jpg

 

 

and CA glued it to pylon...can be painted of course.

THombja.jpg

 

 

 

with the correct drill bit 1mm i made holes for the rare earth magnets and C.A. glued them.( this was the first test and didnt drill them to the correct depth)

YfwdJ2a.jpg

 

 

 

and the first try was successful

ucGj5N8.jpg

 

 

 

 

 

 

second try with a bigger missile....here i used 4mm drill bit and 4x2mm round rare earth magnet. of course you can paint them....i didnt just a test here.

 

5Su1wM6.jpg

Y4lOYEI.jpg

 

 

 

also test for a fuel tank at the same pylon(successful)

tm6hWJx.jpg

 

and

 

mX370NQ.jpg

 

 

 

 

All the tests were made quickly but i am sure you got the point..........

 

 

 

Edited by stelios2000
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...