Heliman

Here's some pics. Next project Mi-24V Hind E. Thanks. Scott

Hi Guys, The Stalloin was completed finally! I'm so happy with it and thanks all of you guys gave me commemts. :) Thanks for watching. :)

I used artist acrylic paint with acrylic solvent. Then mixed black, sand, brown three colors and blended solvent to very thin till the colour you wish. Then used #5 brush to brushing entire fuselage, after all wating for 30-40 min till the paint bit dry then using same# brush to inhaled paint on fuselage till paint smooth and used tissue to wipe off lightly after dry brushed. I hope you know what I mean and don't beat my poor english. :) Scott

Hi Guys, I just completed the painted and weathering work. Let's look some on update pics. I made this bird dusty and dirty look. It's look like RTB from longest hard battle. @Emilio and Adam, Thankyou for your comment. :-) @Josh, your thorny of fuselage problem was solved as least. So don't blamed youself cause you did a really nice work. The black part of fuselage that's I used by airbrush because factory decal suck too! Thanks for watching! :) Scott

Hi Oliver, Thank you for your tips it's really help me out! Yes! This is a really good site and help me learning skill and tips that's why I stay here and won't go other! :) Scott

Hi guys, Some pics update. I made 3 FLIR wire connectors. I don't have PE set, so I added brass mesh for tail screen. Is this tail rotor sensor? I don't know how to call it. This bird to be close to done, I prepare to coating later today. I have a question is shall I sanding before or after primer? Thanks for watching. :) Scott

Hi guys, I was finished landing gear and FLIR system and installed air intake on fuse for temporaries. @xmh53wrench, Thank you for your info. now I knew that. @Youngtiger1, Everyone can build model as good as it gets, just needs patience, enthusiasm, knowledge and a kind sense of humor. :) Any comment are welcome and thanks for watching. :) Scott

That's good work, man! Can't wait to see this horse complete.

RC winch Aerial refueling probe The cargo Scott :)

Hi Guys, Thanks for your complimented! I'm so glad with yours compliment to make me keep working hard! I will keep posting WIP pics. :) @Mason, I want to say thanks to you, because I can't do nothing without your modeling tips! Thanks again!! Let's look something what I did these days. The clear part was riveted too. it's must becareful because it will leak when bit hard. I don't how to call this tube, but it was compareed from real CH-53E pics Rotorhead were hard jobs too. it's spent me all day long. Finally, I'm so happy when rotorhead were done. Tail rotor finish

Hi all, The pics as below were what I did and the rivet job totally completed also. I scraped the edge of exhaust pipe and rear of engine cover a bit thinned. Does it look better then before? I wont useing parts #C63, C64 so I insert 0.1mm plate for air intake. Thanks for watching. Scott

@Oliver, I agree your opinion without seatbelts the cockpit look like unexciting. because I don't have PE set, so I will made one for the cockpit. Scott

Hi all, I just completed rivet of fuselage.it,s really hard working, what do your guys think? Thanks for watching. Scott

These are what I did yesterday. The cockpit and cabin almost done but not perfect yet. So, can anyone give me some suggestion and opinion to make this biggest bird looks better? The cabing floor I use flat aluminum for base coating, than use very thin flat blake to airbrush till it bit daraker but not heavely. than using #320 water sand parer to grind surface of floor lightly. until aluminum colour show up. I use oil wash for interior that not very good skill for me. can anyone point me? I use flat black to airbrush on exhaust to simulat smoke fx. it more like inuse. Thanks fo

Hi G-day all, Thanks all of your comments. I wii keep posting the WIP pics. Today, I'm working on IP panel. it's really hard jobs and didn't weathering yet. I will post weathering pics later. I drilled many holes with 0.15mm drill and connected with wires for IP. it's really hurt my eyes and brain.lol............. Thanks for watching! Scott