MikeC
-
Content Count
481 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by MikeC
-
-
Nice. Be careful about the fit of the top decking.
Just about to bite the bullet and start rigging my first one (Ive two more 534s the stash and plans for at least one on top of that).
-
Not sure what you're asking? Is it:
(1) Are they going to repaint the badges on 918 and 919? or
(2) Are they going to repaint the rest of the Squadron to match 918 and 919?
In the short term I suspect neither - these things are often an "interesting" feature of a fleet in any air force you care to name. In the long term, who knows?
In any case, I say do the model as is, with the kit decals, as that's the easiest option. It can only represent the aircraft at that point in time - later on, who knows what will be added in the say of aerials, lumps and bumps or other markings. Enjoy.
M
-
As the man says, liable to change:
-
Any chance of a new forum for Telford 07 as now only 2 months away!
YES ONLY 2 MONTHS you thought you had ages to finish those models! :D
Julien :P
:blink: Better get on with my F-3A PDQ!
-
I said I'd post some pics http://www.arcforums.com/forums/air/index....p;#entry1148920
Well they're over on Britmodeller, here's the link:
http://www.britmodeler.com/forums/index.ph...st=0#entry47978
Thanks for looking.
-
The S-199's prop had a very wide paddle blade - very necessary to absorb the power produced by what was a bomber engine with high torque at relatively low revs. Unfortunately this was the reason it was known as the Mezek (Mule) - it was not the easiest aircraft to fly; it could, and frequently did, "bite" even the most experienced pilot.
-
It's less well known that some Allison-powered aircraft, particularly Tac-R versions of the P-51A, were also retrofitted with Malcolm hoods.
Actually, the Tac-R and PR Mustangs throw some more confusion in, as my understanding is:
F-6A = P-51
F-6B = P-51A
F-6C = P-51B or C
F-6D = P-51D (and K = K).
My brain hurts!
-
Edgar,
Thank you, you've just made a conversion project I'm planning much easier. As the RAF/Canadair Sabres were essentially the same aircraft it makes sense that they might be shut on the ground. Perhaps I'll include a figure caught having just "shut" the second one.
Thanks again, and see you at Telford I hope.
-
An interesting point for debate arises about the slats on the early marks of Sabre.
Accepted modelling wisdom is that as the slats were not deployable "at will", they remained open on the ground, and therefore any model of a slat-winged F-86 must depict them open. But is that invariably the case? For example, would they stay closed if a crew chief, or a pilot (during walk-round checks perhaps) closed them by hand?
Reason I ask is that I found a photo purporting to be F-86As, which clearly shows them closed. If this is the case it would make building an A model in 1:48 without a conversion set, or butchering a Revell Dog, so much easier.
http://aeroweb.brooklyn.cuny.edu/database/...ge.htm?id=12631
What do you think?
-
I have a Monogram 1:48 Sabre in my stash, and the other day it poked its head out of the loft and yelled "Build me next!" (metaphorically speaking). The kit is good for its day and still reasonable, albeit needing a bit more effort than the Academy or Hasegawa offerings.
The main issue I have is that the air intake and jet pipe have little depth. My options are: (1) scratch-build an intake trunking, re-working the kit nosewheel bay and cockpit to accomodate same, and then scratch up a jet pipe the other end; (2) Find some suitable aftermarket; (3) Paint the interiors black, shading and blending out to the intake lip; (4) a set of FOD covers.
(1) is far too much effort, I prefer painting to building any day. (2) would undoubtedly cost more than the kit, even if I could find such items. (3) is OK, but not really my preferred option, which is (4): simple to knock up from some plastic card and (as FOD covers are usually red) colourful.
So I naturally wondered if this would be historically authentic, which then led me to wonder when FOD guards became commonplace in the RAF's, and indeed other Air Arms', operations. Was it more or less from the days of the E28/39, or was it later as a result of operational experience? Can anyone enlighten me, and better still point me in the direction of a good photo or two of RAFG Sabres?
TIA,
-
Microscale/Superscale also did "The Huff". I made it some years ago, unfortunately I can't remember the sheet reference.
-
I remember seeing tehse at UK airshows in the 70s - iirc the green probably started off a dark shade - slightly darker than RAF dark green - but it was generally so faded that the aircraft was rather variegated. If you like doing pre and post shading, with lots of contrasts and faded patches, Danish Draakens and F-100s fromm the 70s are just the thing.
-
Just sprayed the top surfaces. I went with XF-51 mixed with a smidgeon of XF-60 ("dark yellow", a light-brown colour). Looking good so far, I'll post another photo or two when I get around to getting the camera out.
Cheers,
M
-
:D Hello Mike,
We have a walkaround of the Avia B-534 replica in the Prague-Kbely Aviation Museum right here in the ARC walkaround section. The khaki colour appears to be a pretty brownish colour, but go have a look as it might give you some clues and inspiration.
:wacko:,
Ross.
Thanks Ross, I'll check it out. Still interested to hear others' opinions, not least as I'm always slightly supicious of museum exhibits.
Cheers,
-
It's not a bad kit, and you've done a great model from it. Very effective painting.
Mind if I share mine too?
The scheme was cobbled together with spare decals, this is not a kit option.
-
Eduard's delightful little Avia is coming along well. Despite a fit issue with the top decking/cowling (stopping the fuselage sides bowing in where they join said decking) and deciding not to use the rigging turnbuckles because they are far too small and fiddly for my eyes and fingers (so drum me out of IPMS!
) it's ready for painting.Which brings me to the question of colour. I have a pot of Tamiya XF-51 Khaki (acrylic). It looks about the right colour, but is it too dark? What do you guys think?
TIA
-
Good place to go for a holiday is East Anglia if you like aviation, tons of old WWII airfields, not far from Holbeach range and RAF Cranwell, and the other way to Lakenheath and Mildenhall!!
Cheers,
Eng
Even better place to grow up
I grew up under one end of the Mildenhall circuit, life was an endless procession of KC-135s, C-130s, VT-29s, C-117s/R4D-8s, C-5s, even the odd C-124, T-39, etc etc etc.
Happy days ...
I think you're right, no more A-10s are based here, the last ones left Woodbridge and Alconbury in the early 90s iirc. They are certainly a distinctive sight in the air.
-
"Support and Strike!", subtitled "A concise history of the US Ninth Air Force in Europe" (John F Hamlin, pub 1991 by GMS Enterprises, ISBN 1 870384 10 5) has a pic on P90 of the 439th's aircraft at Balderton (the airfield - Devon is the county) on 17 Sep 1944, and the caption gives the nearest aircraft as 315159, D8:Z. And guess what, it clearly has those windows that are visible painted over. The shot is taken from the aircraft's 10 o'clock, so you can't see many, but it's arguably good enough evidence to suggest that you don't have to strip the paint off after all.
Anyone else back this up? Afraid I don't have a scanner, and sorry, my copy of the book is not for sale, I use it too often.
HTH
-
I always use acrylics. It's Tamiya XF-16 Aluminium, mixed with a dash of white.
I've now got the fuselage assembled and the wings and tail on, they're drying out as I type.
-
Hannants are advertising a decal sheet by HR Models under "Future Releases", it looks as though you'll be able to combine it with the kit decals to make S-12 if you wish, and have enough left over to do anoher Avia with Slovak Axis crosses.
http://www.hannants.co.uk/search/?FULL=HRDL4804
HTH,
-
Shame they never completed the "Vickers geodetic" series - a Warwick and a Windsor would have been great. I know Contrail or someone did a Warwick, but don't ever recall the Windsor. Unlikely you may say, as it only existed as a prototype, but stranger things have been kitted ...
-
Progress to date: preliminary assembly done, interior sprayed, ready for dry-brushing and assembly.
General views:
Fuselage Interiors, with etched cocking handles added to the guns:
Detail bits - fuselage frames, radiator matrix, cockpit floor; seat harness yet to be added:
Rudder pedals are assymetrically set deliberately, the rudder will be suitably deflected.
Only three bits of etch lost to the carpet monster so far, that's pretty good for me. Next time I'll do the cocking handles from scrap plastic, it's easier.
Apologies for the photography, I know I'm no David Bailey!
-
Hi,
I don't normally make things with more than one mainplane, but being a bit of a Czech AF enthusiast I had to have one of these. Now I've bought it I'll have to have more, but that's for the future. I started the one I have (the first release, open-cockpit III serie) last night, and it's a little beauty. There's a whole raft of etched brass if you like that sort of thing, including the rigging turnbuckles and pre-painted instrument panel and seat harness. There are many manufacturers could use this kit as a lesson in how to represent fabric - no "sacking weave" or sagging between ribs here, just an excellent representation of fabric covering.
Four decal options for three aircraft, one of which has two options for Czech or Slovak (Axis) markings.
Downsides found to date: I think the joint where the upper decking fits the main fuselage may need reinforcing - no big deal. I also think that the wheels for the spatted and unspatted versions have been mixed up in the instructions, with the spatted versions shown as being fitted to the non-spatted aircraft and vice-versa (the difference is in the hub detail). Oh, and while we're on the wheels, the tyres have "Dunlop" clearly marked on them.
So whilst it's early days and work in progress, happy so far. I'll try and remember to take some pics and post same if anyone would like.
Looking forward to the "razorback" IV serie.
-
There's an F-6C on Aeromaster 48-288, but it's not currently available.
Father Of All Bombs
in Real Aviation
Posted
"You're only supposed to blow the b*##%y doors off!"