Da SWO Posted March 28 Author Share Posted March 28 Hard to see, but the Blackdog exhausts fill the hole in nicely. Quote Link to post Share on other sites
Da SWO Posted Wednesday at 08:57 PM Author Share Posted Wednesday at 08:57 PM I did a little work over the last month. I partially painted the fuselage. I use spray cans and was concerned about my ability to get paint and masks on under the wings, I am also getting the engines mounted on the wings. The OzMods engines are a little bigger than the mounting nacelles on the model, so putty and sanding (my two least favorite modeling activities) was the order of the day. After getting everything done, I somehow snapped the one engine off and am now redoing the putty/sanding routine. 😞 I also started working on the props, I found a set of White Metal props at a model show and started painting them. Interestingly, the Matte Black is glossy and not flat like I thought. The props are painted silver, de-iceing boots and propeller hub are black, awaiting a dull coat. Photo's I have found suggest a semi-gloss appearance ( @aircommando130 ?) with a shiny section near the tip. Finally, I also built the two external tanks and am prepping them for paint. Quote Link to post Share on other sites
aircommando130 Posted Wednesday at 09:31 PM Share Posted Wednesday at 09:31 PM The cuff where the blade flares out down to the prop dome is black too. Depending on how new the prop is kinda determines the shine of the black. Cheers....Ron Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.