11bee Posted December 29, 2023 Share Posted December 29, 2023 Apparently ICM just announced 48th scale MH-60L & UH-60A's. Great news, given the quality that ICM typically provides. Now if they will only upscale them to 35th, I would be quite pleased. Quote Link to post Share on other sites
ST0RM Posted December 29, 2023 Share Posted December 29, 2023 Lets jump on the mod questions already then. What needs to be done to make a L-model from the A? Our local Tn NG has the converted Limas. Quote Link to post Share on other sites
HeavyArty Posted December 29, 2023 Share Posted December 29, 2023 (edited) Most of the changes are internal to engines and avionics. The IP is a little different on an L as well with a couple different analog dials/gauges. On the outside, the only major difference is that the A had narrow step sponsons below the pilots' doors. The L had added roll stabilizers for the main landing gear which widened the step sponsons by about 6 inches. UH-60A IP UH-60L IP UH-60A narrow step sponsons. UH-60L wider step sponsons. Notice the additional width outboard of the step. Edited December 29, 2023 by HeavyArty Quote Link to post Share on other sites
ST0RM Posted December 29, 2023 Share Posted December 29, 2023 Thanks Gino! Quote Link to post Share on other sites
jgrease Posted December 29, 2023 Share Posted December 29, 2023 (edited) Back to the IP - where did you read/see/hear about this? Just curious because there's nothing on their FB page, nothing on their YT channel and nothing on their website. Seems pretty significant though. John Edited December 29, 2023 by jgrease Quote Link to post Share on other sites
Stephen Posted December 29, 2023 Share Posted December 29, 2023 31 minutes ago, jgrease said: Back to the IP - where did you read/see/hear about this? Just curious because there's nothing on their FB page, nothing on their YT channel and nothing on their website. Seems pretty significant though. John https://www.hannants.co.uk/product/ICM48360?result-token=AtLtm https://www.hannants.co.uk/product/ICM48361?result-token=AtLtm Quote Link to post Share on other sites
jgrease Posted December 29, 2023 Share Posted December 29, 2023 21 minutes ago, Stephen said: Thanks for the heads' up! John Quote Link to post Share on other sites
Sarathi S. Posted December 29, 2023 Share Posted December 29, 2023 Holy crap, yes. Hopefully they also end up putting out a K or M Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.