Jump to content
ARC Discussion Forums
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt
Rotorman

Academy MH 60 S Helicopter 1/35 scale/

Recommended Posts

1 hour ago, norbert said:

windshield first, you will need to force a little the alignment (do not forget to future it before)

Thanks Norbert. already futured.

Share this post


Link to post
Share on other sites

100 Pages for this thread !!!

And nearly 5 years from the first post?!?  Good grief man.  It's time to wrap this up!

 

Oliver, your work is STUPENDOUS.  The quality of your detail and scratch building are best of the best.  Let's "Git'er done!"

 

C2j

Share this post


Link to post
Share on other sites
Posted (edited)

20190731_183238_zps7qazmeie.jpg

 

 

 

Its so close i can taste it. 5 years indeed. 100 pages. I need to start writing the article to go with the photos. I am doing something different. I primed in grey and sanded smooth all the pieces and fuselage after primer. I am adding  a light coat of the US Navy grey which i sanded smooth  then its highlights and finally preshading in flat brown. I will apply the final coats in 3 sessions ( 3 days) then decal time and wash. This is a longer process, the reason is i want my paint job to be as smooth as possible.  Clear parts are next. 

Edited by Rotorman

Share this post


Link to post
Share on other sites
Posted (edited)

Few photos outside to check on the grey.

20190803_174655_zpsilkienxs.jpg

 

 

20190803_174604_zpst0w8mkrr.jpg

20190803_174723_zpsp77nofl5.jpg

Edited by Rotorman

Share this post


Link to post
Share on other sites
Posted (edited)

The gap in the windshield was a joke to fix. I tried Perfect Plastic Putty to deal with the seam ar the bottom but it looked awful...it may have leaked under the masks therefore creating bigger later(hope not). I ended gluing a strip in front of it. 

 

20190805_165829_zpsizt3vonj.jpg

 

20190805_164838_zpsmlpxt384.jpg

20190805_140407_zpsgisirduc.jpg

Edited by Rotorman

Share this post


Link to post
Share on other sites

It never gets easier when the end is in sight, does it? I think your solution with the strip looks good & realistic to me (assuming it's the 1st photo that shows the strip at the bottom of the window). Keep up the great work, we're nearly there! 

Share this post


Link to post
Share on other sites
8 hours ago, SeakingPilot said:

It never gets easier when the end is in sight, does it? I think your solution with the strip looks good & realistic to me (assuming it's the 1st photo that shows the strip at the bottom of the window). Keep up the great work, we're nearly there! 

yes first photo.  I am amazed how poorly those clear parts have produced. 

Share this post


Link to post
Share on other sites

This Helo is getting better everyday its magic

The front windscreen turned out alright, how long before painting and decals

 

Greg

From Downunder

 

 

Share this post


Link to post
Share on other sites
Posted (edited)

Greg.

I have to finish the other bottom window then it painting time.

Working on filters today.

Filters a bit dark for my taste but drybrushing should help.

 

20190811_163252_zpsvy13jcof.jpg

 

20190811_163657_zpseugzfc2i.jpg

Edited by Rotorman

Share this post


Link to post
Share on other sites
Posted (edited)

I just got my Scorpions decals from Germany. WOW, they rock, great quality.  I got  them in 1/48 and 1/35 scale.  Thanks to Heli Scale Quality for providing them.  

Oliver

 

20190813_193333_zpsgvg4wqiu.jpg

 

20190813_193359_zpsc8d0hkcp.jpg

 

Edited by Rotorman

Share this post


Link to post
Share on other sites

It appears that KittyHawk is in need of inspiration from modelers lately.

If this isn't copying my build i dont know what is?

Even the gun i designed is the same. So many other options for the S. The sonar rig and sonar torpedo would have been a better thing to copy.

69110783_2395950427330235_20998015953896

Share this post


Link to post
Share on other sites
6 hours ago, Rotorman said:

It appears that KittyHawk is in need of inspiration from modelers lately.

If this isn't copying my build i dont know what is?

Even the gun i designed is the same. So many other options for the S. The sonar rig and sonar torpedo would have been a better thing to copy.

69110783_2395950427330235_20998015953896

BWAHAHAHAHAHA are you serious? The MH-60S has been in service for years in multiple configurations that have been thoroughly documented...several of which shown in the picture will probably be available in different issues of the coming kit. I *highly* doubt Kitty Hawk said "hey, let's copy this random nobody's model build" when there are tons of actual legitimate and accurate references out there...such as...um...the real helicopter? If they truly *copied* your build they would have put the FLIR turret on the wrong side too lol. Just a *wee* bit full of ourselves aren't we 🤣🤣🤣

Share this post


Link to post
Share on other sites
1 hour ago, wakko807 said:

BWAHAHAHAHAHA are you serious? The MH-60S has been in service for years in multiple configurations that have been thoroughly documented...several of which shown in the picture will probably be available in different issues of the coming kit. I *highly* doubt Kitty Hawk said "hey, let's copy this random nobody's model build" when there are tons of actual legitimate and accurate references out there...such as...um...the real helicopter? If they truly *copied* your build they would have put the FLIR turret on the wrong side too lol. Just a *wee* bit full of ourselves aren't we 🤣🤣🤣

Yep u missed something.

Share this post


Link to post
Share on other sites
1 hour ago, wakko807 said:

"hey, let's copy this random nobody's model build"

LMAO!!! gotta love the internet! 😂

Share this post


Link to post
Share on other sites
3 hours ago, wakko807 said:

BWAHAHAHAHAHA are you serious? The MH-60S has been in service for years in multiple configurations that have been thoroughly documented...several of which shown in the picture will probably be available in different issues of the coming kit. I *highly* doubt Kitty Hawk said "hey, let's copy this random nobody's model build" when there are tons of actual legitimate and accurate references out there...such as...um...the real helicopter? If they truly *copied* your build they would have put the FLIR turret on the wrong side too lol. Just a *wee* bit full of ourselves aren't we 🤣🤣🤣

Who's, "we"?  I don't recall this discussion being about any design that was put out there other than mine. It was just confirmed that my design was given to Kitty Hawk. That being said, I guess I can be as "full of myself" on My "nobody model build" as I want to be. I am not that way, and it's nothing less then crass bullying to make such statements. Sometimes it's better not be so anxious to jump on other people without knowing any facts.  As far as the FLIR  turret goes I have a picture of it on both sides so mine is right as well.  Your tone is far more aggressive and dismissive than should be necessary here. What a shame.  

 

Oliver

Share this post


Link to post
Share on other sites
1 hour ago, Rotorman said:

Who's, "we"?  I don't recall this discussion being about any design that was put out there other than mine. It was just confirmed that my design was given to Kitty Hawk. That being said, I guess I can be as "full of myself" on My "nobody model build" as I want to be. I am not that way, and it's nothing less then crass bullying to make such statements. Sometimes it's better not be so anxious to jump on other people without knowing any facts.  As far as the FLIR  turret goes I have a picture of it on both sides so mine is right as well.  Your tone is far more aggressive and dismissive than should be necessary here. What a shame.  

 

Oliver

The top mounted FLIR is correct for the SH-60B, MH-60R, and HH-60H...not the MH-60S. So "right" is a point of view. But I digress.

 

So let me get this straight...you gave them your design...and now you're pissed they copied it? What did you think was going to happen? That's just naive and hilarious. Good luck with that. 🤣🤣🤣🤣🤣

 

< smileys for upbeat tone >

Share this post


Link to post
Share on other sites
Posted (edited)

So you sold/gave your gun design to a company for them to sell and that company is also one of Kitty Hawk's main designers.  Now you are surprised that the gun will be included in a future Kitty Hawk release?  Really???   I'm with wakko807 on this one.

Edited by HeavyArty

Share this post


Link to post
Share on other sites
8 hours ago, wakko807 said:

The top mounted FLIR is correct for the SH-60B, MH-60R, and HH-60H...not the MH-60S. So "right" is a point of view. But I digress.

 

So let me get this straight...you gave them your design...and now you're pissed they copied it? What did you think was going to happen? That's just naive and hilarious. Good luck with that. 🤣🤣🤣🤣🤣

 

< smileys for upbeat tone >

it was given without me knowing.

Share this post


Link to post
Share on other sites
1 hour ago, HeavyArty said:

So you sold/gave your gun design to a company for them to sell and that company is also one of Kitty Hawk's main designers.  Now you are surprised that the gun will be included in a future Kitty Hawk release?  Really???   I'm with wakko807 on this one.

 

1 hour ago, HeavyArty said:

So you sold/gave your gun design to a company for them to sell and that company is also one of Kitty Hawk's main designers.  Now you are surprised that the gun will be included in a future Kitty Hawk release?  Really???   I'm with wakko807 on this one.

Of course you would step into this discussion.  Have at it my friend. 

Share this post


Link to post
Share on other sites
8 hours ago, wakko807 said:

The top mounted FLIR is correct for the SH-60B, MH-60R, and HH-60H...not the MH-60S. So "right" is a point of view. But I digress.

 

So let me get this straight...you gave them your design...and now you're pissed they copied it? What did you think was going to happen? That's just naive and hilarious. Good luck with that. 🤣🤣🤣🤣🤣

 

< smileys for upbeat tone >

the Flir will be at the bottom, My build is not done so take a take seat and chill. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...