Jump to content
ARC Discussion Forums

ash74

Members
  • Content Count

    41
  • Joined

  • Last visited

Everything posted by ash74

  1. I have three For some reason Metallica's Outlaw torn gives me Goosebumps & a little sad, not sure why another one is called "under the Milky Way" by the church The last one is Sister golden hair by America, it just reminds me of an aunt that has now left us With two other possibilities, being... …Bare by Anthrax, & Angel flying to close to the ground by Willie nelson This is great question Thanks Ash
  2. Yep, the old AMT speeder biker. Thanks for the guidance. Yes I was a little concerned around the hip area as well, it does seem very chunky. As he is spare, I don't mind trying something new. Thanks for the help Ash
  3. Thanks Bill Its the Star Wars biker scout, It's down as 1:11 scale. It is made of plastic styrene (I think?) They are one piece, except for the arms, they are separate. Thanks Ash
  4. Hello All I want know if there is a guide to changing a sitting posed figure to a standing one? Thanks Ash
  5. ash74

    UH-1D SAR

    Thank you Luca I have the DF-helostuff decals, which has lead to my confusion. The photos I have seen, show no anti-glare nose & a white roof (I think?) The DF-helostuff instruction's show these. But you are right & maybe I can speak to David & see if he can guide me. Thanks Ash
  6. Hello All I am trying to build the Revell 1/32 Bundeswehr Luftwaffe UH-1D (SAR) 70+54 25th anniversary Alhorn 1984 bird. It has black/red & yellow stripes. It was a Revell kit (4440) I am wondering if anyone has a walkaround, particularly of the underneath? I have some photo's but some seem to create confusion not help it. Thanks Ash
  7. Hello I have this kit too, I would love to have a go it one day, but I don't like painting white, however I am gaining confidence using Tamiya lacquer paints. I do like the coast guard helicopters. If you get a chance have a look at movie called "the Guardian" it has Kevin Costner & Ashton Kutcher in it (Don't let that put you off!!!) It's has some footage of these types of choppers, some inside. I look forward to seeing this built. Ash
  8. Hello Minicraft have re-released it in 2017. If that helps? Thanks Ash
  9. Hello Without seeing the complete instructions. The gradient could mean metallic finish? I am not sure whether the direction changes things? Thanks Ash
  10. Thankyou, I will keep an eye out for it. That's great to hear it will fit the Kinetic kit, as I bought one in anticipation for the decals (Hoping it was right) Thanks Ash
  11. Hello Is there a release date for the 1/48 Hornet early years? & is the Kinetic F/A 18A the right Hornet to use these decals on? Thanks Ash
  12. You could try scalemates, they have visible 2.3 litre turbo engine, which looks like a re-box? You just search 1/3 in the instructions area. It should bring it up. Hope it helps? Ash
  13. ash74

    SH-60B

    Thank you Gino, I wasn't to far off, but that's a great help. Ash
  14. ash74

    SH-60B

    Hello Could anyone let me know what colours would be in the cockpit & cabin area in an early 80's white over grey scheme SH-60B ? I have seen gunship grey & flat black, but not convinced this correct? Thanks Ash
  15. Thank you Ray That is a great help, I have the tails totally wrong, I wasn't to far along with the wings. Thank you for the help. Ash
  16. Hello All I am hoping someone can help? I doing an old Airfix 747, I have Liveries unlimited 747 Inspar panels, but I have no instructions for it. I don't know if I have misplaced them or whether they where never there. I am hoping someone can guide me where the decals go? or where I can locate a set of instructions? Thanks Ash
  17. Hello I might be completely wrong & it might be just that they are similar colours, but what about 1/48 scale either U2 or SR-71 pilots/crews, they look similar & may be passable with a few modifications? Not sure this helps? Thanks Ash
  18. ash74

    Decals

    Thank you I will look into the decals. I am surprised no one has had a go at them. Thanks for the correcting me on the aircraft. I don't usual build airliners (White is hard to paint!!!) I going by what was mentioned in the movie, not what it actually is. You have helped a great deal. Thanks for the pictures & help Ash
  19. ash74

    Decals

    Hello All I am seeing if anyone can shed light on whether there are decals for plane in the movie Airplane! (or flying high, for the aussies) Hope someone can help? Thanks Ash
  20. Hello We loved Honolulu Pacific air museum is great for being very interactive. The Missouri was a lot of fun too(So was the Bowfin, if your small!!!) There was an aquarium to north of the Island, but I cannot remember it's name, it was fun for something different, then military or vehicle related. We didn't have any bad experiences, even the homeless where nice. Take time to enjoy it. As for hobby shops, I did not find any, but I had a lack of knowledge being both the first time there & the first time overseas. However Pearl Harbour display gift shop has some models for sale, mostly related to Pearl Harbour & WW2, but you never know your luck, it has been 5 or 6 years since we have been, mores the pity!!! Would go again in a heartbeat Ash
  21. Hello All I am hoping to get some advice. I trying to build the 1/48 ICM RBT Foxbat. I am stuck on trying to get internal intakes built & attached. I have tried both the ICM way & Revell way with no success. Does anyone have any suggestions on how to get it accomplished? I am having trouble on where the initial intakes attach to the cockpit module, as well. Thanks Ash
  22. There are two books on Vietnam nose art, I think they are called Vietnam Helicopter nose art 1 & 2, by John Brennan. They are two of my favorite books!!! Thanks Ash
  23. Hello I am not sure if this helps? But Metro Hobbies in Australia have the Academy MH-53E. They are usually pretty good at keeping what's on line & what's in stock accurate. But if you have doubts. I am more then happy to have a look & confirm it's there. Hope this helps? Thanks Ash
  24. Hello Dlij60 I can help you with those instructions. I can send them electronically or photocopy them & post them. Happy with either. Let me know? thanks Ash
  25. It seems like the 1/48 Hasegawa AH-64D long bow "Iraq freedom" does but with picture provided I couldn't tell if this was the type you are after? it's definitely 1 cav though. Thanks Ash
×
×
  • Create New...