dragan_mig31 Posted December 7, 2009 Share Posted December 7, 2009 this is the kit i started long ago but never had the nerves to finish it.i have now restarted this build and i plan to make it better than the first one.this will have completly scratchbuilted cockpit and RV I PVO markings before 1992. Quote Link to post Share on other sites
SuperCuber Posted December 9, 2009 Share Posted December 9, 2009 Dragan, Just a short note as this Orao kit producer. Since you have early kit release,you must to do some corrections on fuselage, under the air intake to have a proper line . Just sand this "s" shape and move it rearward for some 10mm, find attached photo instructions. I do the same correction on my model, which is also from first batch of released Orao kits, look here: http://www.arcforums.com/forums/air/index....p;#entry1866532 Compare gray and black underside photo on this topic and you will see the difference. New kit release have modified this fuselage area, to correct shape. Have a nice model build with this Orao. Quote Link to post Share on other sites
dragan_mig31 Posted December 9, 2009 Author Share Posted December 9, 2009 Dragan,Just a short note as this Orao kit producer. Since you have early kit release,you must to do some corrections on fuselage, under the air intake to have a proper line . Just sand this "s" shape and move it rearward for some 10mm, find attached photo instructions. I do the same correction on my model, which is also from first batch of released Orao kits, look here: http://www.arcforums.com/forums/air/index....p;#entry1866532 Compare gray and black underside photo on this topic and you will see the difference. New kit release have modified this fuselage area, to correct shape. Have a nice model build with this Orao. thanks a lot,i will try to correct the intakes too,to make them more round.. Quote Link to post Share on other sites
kurnass77 Posted December 9, 2009 Share Posted December 9, 2009 Wow, a rare but very interesting subject; follow with interest, as for all your work Dragan. Good luck with the project :) Gianni P.S. congratulations also for your F-20 Quote Link to post Share on other sites
dragan_mig31 Posted March 30, 2010 Author Share Posted March 30, 2010 i have restarted the project.i stil have no photos but i promise i will post some tommorow. Quote Link to post Share on other sites
dragan_mig31 Posted April 1, 2010 Author Share Posted April 1, 2010 here is the current state and progress.the fuselage and wings are joind but there are huge gaps that need to be filled.the cockpit is 80% done.i have also managed to make copies of the windhsield and canopy with thicker transparent plastic.hope you like it. Quote Link to post Share on other sites
dragan_mig31 Posted April 8, 2010 Author Share Posted April 8, 2010 here is the j-22 primed and filled.i maanged to fill 90% od the joints and bubbles in the resin but still i have to make a few sandng jobs.resin kits are pain in the a@@ so build and i hope that this is my last one but something tells me that it will be one of the many in my collection. Quote Link to post Share on other sites
Laurent Posted April 8, 2010 Share Posted April 8, 2010 resin kits are pain in the a@@ so build and i hope that this is my last one but something tells me that it will be one of the many in my collection Same feeling building the AMX... Quote Link to post Share on other sites
dragan_mig31 Posted April 10, 2010 Author Share Posted April 10, 2010 here is the J-22 with the pitottube scrathcbuilted from needle.i modified the horisontal stabilisers to represent the other type without the balast in the ends.now all i have to do is to add the horisontals stabilisers and the wing hardpoints and the detailing of the cockpit can start. Quote Link to post Share on other sites
dragan_mig31 Posted April 12, 2010 Author Share Posted April 12, 2010 theese days i had little time to work on the kit so i managed to finaly get the fuselage joints and wing joints to the level that is aprropriate for painting.i still have to detail paint the cockpit and add the front windshield and the small mirror on it so i can start painting the kit. Quote Link to post Share on other sites
dragan_mig31 Posted April 13, 2010 Author Share Posted April 13, 2010 here is the j-22 with it's camo freehanded with eyeballed colours from MM and humbrol enamels. Quote Link to post Share on other sites
dragan_mig31 Posted April 15, 2010 Author Share Posted April 15, 2010 after two days of stripping paint and sanding i managed to freehand the cammo again.this time much better. Quote Link to post Share on other sites
mimis Posted April 15, 2010 Share Posted April 15, 2010 Really interesting subject Dragan! Well done! Quote Link to post Share on other sites
HOLMES Posted April 15, 2010 Share Posted April 15, 2010 very nice progress .. good build..great project . Quote Link to post Share on other sites
dragan_mig31 Posted April 15, 2010 Author Share Posted April 15, 2010 thanks alot guys. Quote Link to post Share on other sites
sdaneels Posted April 15, 2010 Share Posted April 15, 2010 Great work so far, I have one in 1/48 in my stash waiting for such an excuse to be built. BTW does anyone know whether the model has any tail sitting tendencies? Quote Link to post Share on other sites
dragan_mig31 Posted April 15, 2010 Author Share Posted April 15, 2010 Great work so far, I have one in 1/48 in my stash waiting for such an excuse to be built.BTW does anyone know whether the model has any tail sitting tendencies? this model has no such tendency,but i added led in the front for just in case to be sure about it.please start your model :unsure: Quote Link to post Share on other sites
dragan_mig31 Posted April 22, 2010 Author Share Posted April 22, 2010 this is the maxium i can pull out with one hand(the other is broken,literally).the completition would have to wait till i get better in a couple of weeks. Quote Link to post Share on other sites
sdaneels Posted April 23, 2010 Share Posted April 23, 2010 Amazing that you've done that single handed. Now I have no excuses for doing mine, and shall star it as soon as I clean the desk of ongoing projects Quote Link to post Share on other sites
Aigore Posted April 23, 2010 Share Posted April 23, 2010 Awesome, Dragan!!! Cool little jet...almost looks a bit AMX-ish Quote Link to post Share on other sites
janman Posted April 23, 2010 Share Posted April 23, 2010 Well that's pretty well done with one hand only! Quote Link to post Share on other sites
Qian Posted April 23, 2010 Share Posted April 23, 2010 Looking very good bud! :D Keep it up! Quote Link to post Share on other sites
dragan_mig31 Posted April 24, 2010 Author Share Posted April 24, 2010 thanks guys.this means so much to me Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.