Jump to content
ARC Discussion Forums

Sign in to follow this  
Flankerman

Sukhoi T10 Flanker Prototype from Modelsvit

Recommended Posts

Look what Santa brought.... the latest 1/72 scale kit from Ukrainian manufacturer Modelsvit... the Sukhoi T10 Flanker prototype.

 

T10_001.jpg

 

Excellent box art showing Bort 'Yellow 10' - one of two options in the box.

 

T10_002.jpg

 

Top and bottom fuselage halves - with delicate engraved detail..

 

T10_003.jpg

 

Ogival shaped wing parts - totally different to the production T10S 'Flanker-B'. Plus fins and tailplanes.

 

T10_004.jpg

 

Engine nacelles for the Al-21F engine fitted to the prototypes.

 

T10_005.jpg

 

Nose gear, mainwheel bays and cockpit parts. The sprues now have part numbers moulded on next to the part - a useful development.

 

T10_006.jpg

 

Main undercarriage parts and wheels.

 

T10_007.jpg

 

Jetpipes, compressor faces and afterburner flameholders - all neatly moulded.

 

T10_008.jpg

 

2 X R-27ET plus 2 X R-27ER missiles - as fitted to these prototypes.

 

T10_009.jpg

 

Crystal clear canopies - both open and closed options.

 

T10_010.jpg

 

Early K-36 ejection seat - made up from 26 parts !!!!

 

T10_011.jpg

 

Decal sheet - note the two instrument panels - one for the plastic panel, one for the etched brass option.

 

T10_012.jpg

 

Etched parts - plus the plastic IRST ball. The clear perspex is for the etched HUD !!!!

 

I didn't photograph the self-adhesive masks - which contains masks for the wheel hubs as well as masks for both inside and outside of the canopy !!

 

T10_013.jpg

 

Back page of the 12-page construction booklet.

 

This is a fantastic kit from Modelsvit - crisply moulded with delicate engraved panel detail, plus etched brass parts and canopy masks - a truly comprehensive package.

 

Ken

Share this post


Link to post
Share on other sites

hm, Ken look like you Santa and my Ded Moroz make a deal with Ukranian producers about Modelsvit promotion. Mine T-10 will arrive this evening.

Share this post


Link to post
Share on other sites

Lucky FlankerMan!  :D :D

 

In the past days I was going to ask where the review and the start of the build! After all the kit has been out for some hours by now! :D

 

Look forward to developments!

 

Happy new year Ken! :party: :party:

 

Best regards

Gabor

Share this post


Link to post
Share on other sites

Soooo cool. Looking forward to seeing this one built. I am a bit surprised it was already testing R-27ER/ET at that point? Would have expected vanilla R/T.

Share this post


Link to post
Share on other sites
2 hours ago, Berkut said:

I am a bit surprised it was already testing R-27ER/ET at that point? Would have expected vanilla R/T.

 

I'm just going by what it says on the sprues Berkut - dunno if the Extended Range versions were available in the T10-10/11 timescale.

 

Ken

Share this post


Link to post
Share on other sites

I know Ken - I am just expressing that i am surprised it was flying with/testing ER/ET. And the missiles are ER/ET.

Share this post


Link to post
Share on other sites

What a great-looking kit. The detail is gorgeous, besides the fact they kitted a prototype. I'm excited to see your build come together!

 

I showed my wife the photo of the seat sprue and explained the size of the parts and how this compares to the kits I build. I don't know if she was impressed, or scared for your sanity!

Share this post


Link to post
Share on other sites

Right, let's get started.........

 

T10_014.jpg

 

Components of the combined cockpit and nose wheel bay - note the two-part control column and the rudder pedals plus the raised pipework.

 

T10_015.jpg

 

The jetpipes are constructed from three radial segments plus a flameholder and a rear turbine face.

 

I found it easiest to glue one segment to the rear face, then add the flameholder - followed by the remaining two segments.

 

The parts are numbered - and keyed - so they only fit one way. As long as care is taken there should be no problems....

 

T10_016.jpg

 

Assembled jetpipe on the left - with the components on the right.

 

More later.....

Ken

Share this post


Link to post
Share on other sites

More.....

 

T10_017.jpg

 

Modelsvit include a fully detailed interior for the intake and engine nacelle to cater for the transition between the 'square' intake and circular compressor.

 

T10_018.jpg

 

The intake partly assembled......

 

T10_019.jpg

 

Fully assembled intake/nacelle (the jetpipe assembly is dropped in later).

 

T10_020.jpg

 

It is a complicated assembly - but it captures the shape perfectly.

 

Ken

Share this post


Link to post
Share on other sites

More (if anyone is interested?)........

 

T10_021.jpg

 

Even without the superb 26-part K-36 ejection seat in place, the cockpit detail is stunning.
I used the kit decals for the instrument panels (totally acceptable in this scale)......

 

T10_022.jpg

 

...... although for the super-detailer, alternate etched brass panels are provided.

 

Ken

 

Share this post


Link to post
Share on other sites

OK........

 

T10_023.jpg

 

All versions of the Flanker have a distinct shallow-vee shaped lower fuselage section - correctly captured in this kit by means of a rectangular insert.....
 

T10_024.jpg

 

Very few Flanker kits get this area correct - so well done Modelsvit!!  Note the raised detail in the wheel bays and engraved panel detail - this is a quality kit. :thumbsup:

 

T10_025.jpg

 

The cockpit/nosewheel bay sub-assembly and port side rear exhaust is in place - with the stbd one still to be added. The main wheel bays are built up from three vertical 'walls'

 

T10_026.jpg

 

The complex contours of the engine nacelles fit perfectly onto the lower fuselage. The only smear of filler needed was on the lower joint line (overdone in my case).

 

Ken

Share this post


Link to post
Share on other sites

Ken Great work!!! I missed to bought this kit.... it is very hard to found for good price.

Share this post


Link to post
Share on other sites

Great work mate!

Modelsvit standard quality is very high;I resisted 'till a pair of days ago,but I fallen to temptation and ordered their Su-20,now I'm in trepidation....

 

 

 

Gianni

Share this post


Link to post
Share on other sites

If you are going to build this kit - there are a few things to watch out for (as I discovered the hard way  :bandhead2:  )  These are number 2 & 3.

 

T10_027.jpg

 

1. This is the first time I have ever added noseweight to a Flanker kit - Modelsvit recommend 2g.
2. Make sure the cockpit sub-assembly is seated well down in its recess - or it will foul the upper fuselage.
3. Do not glue these side booms in place until after the upper fuselage is in place.            
4. Plastic tabs added to make sure the jetpipe sits centrally in the rear nacelle.  

 

Point 1 is not really an issue - just an observation

Point 2 caused me problems when I test fitted the upper fuselage - the cockpit sub-assembly was too high so the upper fuselage left a gap at the sides. I had to remove it and make it sit lower - so do plenty of test fitting.

 

Same with Point 3 - I had glued them in place - but when fitting the upper fuselage, one side had a gap - so it had to be fixed. Again, test fitting first would have solved it. :doh:

 

Point 4 is just a tip to make sure the jetpipes are central inside the nacelle.

 

None of the above is a fault of the kit - just my ham-fisted lack of test fitting - you have been warned!

 

Ken

Share this post


Link to post
Share on other sites

The upper and lower fuselage halves are joined - after a bit of trimming........

 

T10_028.jpg

 

Underside view......

 

T10_029.jpg

 

The wings are tempoarily attached - just to show how different it is the the production T10S Flanker......

 

T10_030.jpg

 

Ken

Share this post


Link to post
Share on other sites

Great progress!

The wings looking more MiG-29ish that the production ones to me!

 

 

Gianni

Share this post


Link to post
Share on other sites

Someone asked on another forum if you could make the first prototype T10-1.

 

The answer I gave was 'with difficulty'...

 

I found these drawings in the Ukrainian magazine Aviatsiya i Vremya......

 

I have cut-and-pasted them to show the differences in the nosecone - T10-1 at top and T10-5 at bottom.......

 

T10_031.jpg

 

T10-10 and T10-11 (as kitted by Modelsvit) were the radar and optronics testbeds and had longer radomes (similar to T10-5) plus the IRST ball on the windscreen - although I have been unable to determine if the radomes were 'fatter' (ie increased in diameter).

 

Another difference (as well as the vertical vs canted fins) is that, as first flown, the T10-1 had four wing fences (later reduced to two).

 

Ken

Edited by Flankerman

Share this post


Link to post
Share on other sites

Now in a coat of grey primer.....

 

T10_032.jpg

 

It's very different to the redesigned T10S Flanker.

 

T10_034.jpg

 

Note the canted fins - first T10-1 had perfectly vertical fins - as did the production T10S (but mounted outboard on the side booms).

 

T10_035.jpg

 

Anti-flutter weights on all flying surfaces - plus wing fences. Note the excellent panel detail - nice one Modelsvit :thumbsup:  :worship:

 

Ken

Edited by Flankerman
Spelling!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...