-
Content Count
931 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by Justin Davenport
-
Israeli AF F-16A Netz - Ilan Ramon's Bird
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Thanks, Andre. I do have a Hase Phantom kit....in 1/48 scale. In 1/72nd scale I have several Revell and Monogram kits plus the ESCI kit. Of course this IS an excuse to go to the hobby shop.....lol. If those kits I do have don't have the dispenser I'll either scratchbuild mine or put in a parts request somewhere. Justin -
Israeli AF F-16A Netz - Ilan Ramon's Bird
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Thanks, both of you. I've decided to build it as it appears recently. Sometime in the future I'll build one as it was on the night of Osirak, maybe in 1/48th scale as I am slowly transitioning to that. And if anyone has reference material on that, it would be appreciated. ;) I know I'll need chaff dispensers for the tail but I've decided to leave them off until I get past the decaling part. And I don't know where I get them, I'll double check my Hase kits but I don't think they have them. Neither do my Revell kits. Justin -
Israeli AF F-16A Netz - Ilan Ramon's Bird
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Well, everyone, after a long break I finally got back to the bird. It's now got its camo scheme on, and it went a lot better than my Ra'am build (which is now on an extended break. Too many problems with the tails, I thought I'd saved the build but now I'm considering stripping the paint job). Anyway, the next step with the Netz is to Future it and get the decals on, after touching up some areas on the underside with light ghost gray. MM Enamels were used: Light Ghost Gray, Dark Gull Gray, Sand, Dark Tan, Sky Type S. -
1/72 Hasegawa F-15E Conversion
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Here's a look at the left side. -
1/72 Hasegawa F-15E Conversion
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Whoo....after a bunch of difficult work and angst, and a couple of setbacks, I finally finished the paint job. It's not perfect but it looks way better than it did after the initial disaster (covered in the general forum). Any suggestions/comments are welcome. -
Sweet looking Airwolf! Like the overall finish, looks very nice and clean. And the guns "out" is a nice touch. Justin
-
1/72 Hasegawa F-15E Conversion
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Thanks Martin....I'm getting the bird masked up and will spray on the Sky first. That is, if I have it in my paint collection, I'll need to check. Justin -
1/72 Revell Space Shuttle Columbia
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Thanks both of you. I don't think it will be finished in time for the mini contest though, this will be a long and slow build because I'm going to do things like detail the gear wells, that's the next step. As far as the Meteor decals I will use them, but I'll spray on a very light coating of black to darken them up after I apply them. They are a little light to my eyes. Justin -
1/72 Revell Space Shuttle Columbia
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Well, I've restarted work on the shuttle after a little break. I've gotten done with the cockpit....I glued on sheet styrene squares on the instrument panel, then glued clear blue plastic over those squares, and glued strips of styrene to separate the multifunction displays. -
1/72 Hasegawa F-15E Conversion
Justin Davenport replied to Justin Davenport's topic in In-Progress Pics
Well everyone....weather did NOT permit me to spray on the camo until these last couple of weeks. I've been studying for my CCNA test (I didn't pass yesterday, will retake Mar 23) but I found time to finish my 727, work on my shuttle and Ra'am in between intensive study periods. So here's the Ra'am as it is right now, in Humbrol 121 - the Dark Earth and Sky will be applied this week. -
1:48 B-47E Stratojet progress
Justin Davenport replied to Darius at home's topic in In-Progress Pics
Wow. OUTSTANDING scratchbuilding work so far. My grandpa flew B-47's in the fifties so I'm watching this build...I look forward to the finished product. Justin -
1/48 Hasegawa Spitfire Mk. IX
Justin Davenport replied to geoffrey abreu's topic in The Display Case
Good work on that bird. I have that same decal set....I wouldn't have put that exhaust stain over the lady's hairdo, but that's just me. Justin -
Airfix 1/144 Boeing 727-200
Justin Davenport replied to Justin Davenport's topic in The Display Case
Speaking of next time....I have decided there WILL be another airliner build in the near future. And I think I've got the subject too, it's an Airfix kit in my stash.....the British Airways Trident. Look for it next to the 727 in the next few months. And look for a Southwest 737-700 too sometime.... Justin -
Airfix 1/144 Boeing 727-200
Justin Davenport replied to Justin Davenport's topic in The Display Case
Thanks again everyone....here are some more pictures. The next time I build an airliner I might cut the stripe into segments before applying, the stripes were very hard to manage on this bird. -
The Airfix/Heller Challenge in Utah
Justin Davenport replied to Philp's topic in Airfix/Heller Group Build
Ah yes, the Mini Contest....I'll bring a few kits there, including the Mig and the 727. I'll check out the gallery also. Justin -
My Space Shuttle Complex project...
Justin Davenport replied to indydog's topic in Real Space Modeling
Looks very nice, nice work on those stairs. I don't know if I could work with PE like that yet. And I agree with Jay on the Minicraft kit. Justin -
Airfix Boeing 727-200
Justin Davenport replied to Justin Davenport's topic in Airfix/Heller Group Build
Thanks David. I just might do another airliner this year, we'll see. Oh, and Ralph, that satellite behind my 727 is a paper kit of the Mars Global Surveyor from SCIKITS that I finished in December. Justin -
Great looking Tempest. Very nice camo finish. By the way, where did you get those black gripper thingies to keep the seams closed? I need to get myself some. Justin
-
Sweet bare metal finishes! How well did the Alclad gray primer go on? I've heard bad things about its black primer. Justin
-
Airfix 1/144 Boeing 727-200
Justin Davenport replied to Justin Davenport's topic in The Display Case
Thanks everyone Now I'll be putting away my modeling stuff for the next week while I finish studying for my CCNA test (I'm pretty much there with understanding the material)...once I finish and pass the test on March 6th, I'll work on my existing projects and maybe start one more. As for the difficulties I experienced....I had to use some putty but it wasn't too bad...then bad weather hit and I had to stop work for a while. Then I had problems with the airbrush...then the BMF and gloss white, mostly the gloss white...then the engine nacelles were a disaster. One of them fell apart on me a -
Airfix Boeing 727-200
Justin Davenport replied to Justin Davenport's topic in Airfix/Heller Group Build
Thanks Tim and everyone else....by the way, nice Concorde. Wonder if Halfords is available in the U.S., or if it isn't what is the equivalent? Justin -
Looking good Nenad, keep on going! Justin - just finished HIS first airliner kit in a while. It's in the critique corner.
-
Looks great....welcome to ARC! Nice work on the cockpit and overall finish. Justin
-
Well, everyone, here's my second finished kit of 2007. Just in time for the end of the Airfix GB. And it's the first airliner kit I've built in quite a while. I am now wanting to build more, despite the frustrations and difficulties I experienced with this one, it was a battle till the very end. But it gave me good practice on BMF and gloss white, and the two together look amazing when properly done.
-
Just in under the deadline....the TWA 727-200!