Pete Wenman Posted June 7, 2008 Share Posted June 7, 2008 Guys hi I've got the Tamiya P-47M kit, but for some obscure reason I want to build it as a D instead. I assume if I just ignore the L sprue and find the original parts from among the other sprues I'm good to go ? Pete Quote Link to post Share on other sites
Dave Williams Posted June 7, 2008 Share Posted June 7, 2008 You can make any of the bubbletop Ds from the -M kit. In fact, many of the items on the L sprue like the cockpit, dive brakes, and dorsal fin, are applicable to late -Ds also. I think about the only -M specific parts in the kit are the engine parts (bolted crankcase, mags), so leave those off. Quote Link to post Share on other sites
latormentabritanica Posted June 7, 2008 Share Posted June 7, 2008 You'll have to change the surface of the cockpit flooring, depending on the block number you want to build. I believe it's the -30's and later that don't have the corrugated floor. I can't remember, I'm sure someone will correct me on this one. Quote Link to post Share on other sites
Dave Williams Posted June 7, 2008 Share Posted June 7, 2008 The -M kit contains both floors. Quote Link to post Share on other sites
pastafarian Posted September 8, 2008 Share Posted September 8, 2008 The search button is my friend ;) I was just about to ask this question. Now to wait for the 40% off coupon next monday. Gonna get a P-47M and an F-51D. :lol: John Quote Link to post Share on other sites
Hal Marshman Sr Posted September 8, 2008 Share Posted September 8, 2008 (edited) Hi, Everything depends on the subtype -D you want to build. A D-30 has the flat floor, compressability flaps, outboard landing light, and streamlined fin strake. The engine, however would retain the bullet shaped gear case. Earlier -D birds don't have fin strakes or compressability flaps, have corrugated floors, and the landing light mounted inboard. Different blocks carried different props, so check references on the individual bird you're intertested in Some of the earlier -Ds retained the smooth wheel covers. Above all else, have fun. Hal the P-47fan Ohhh check out the proper gunsight for the plane you'ree doing. I believe tamiya provides three. Edited September 8, 2008 by Hal Marshman Sr Quote Link to post Share on other sites
pastafarian Posted September 9, 2008 Share Posted September 9, 2008 I haven't really looked into it much yet. I've got the Aztec decals for a Mexican P-47 so I'm guessing it's one of the late blocks that came out. Heck it might be so far at the end of the D's that it might be the same as an M. You know of any websites that are good for the Mexican P-47's (or any sold to South and Central America)? Thanks, John Quote Link to post Share on other sites
CanadaMoe Posted September 9, 2008 Share Posted September 9, 2008 I thought the instrument panel decal in the -M kit is different from the -D kit. Quote Link to post Share on other sites
Icehound Posted September 9, 2008 Share Posted September 9, 2008 The pics I have seen of the Mexican AF during the campaign in the Philippines in 1945 are P-47D-30 . Quote Link to post Share on other sites
P-38 guy Posted September 9, 2008 Share Posted September 9, 2008 A couple of pic's from the National Archives. Mike Quote Link to post Share on other sites
top-aztec Posted September 9, 2008 Share Posted September 9, 2008 (edited) I haven't really looked into it much yet. I've got the Aztec decals for a Mexican P-47 so I'm guessing it's one of the late blocks that came out. Heck it might be so far at the end of the D's that it might be the same as an M. You know of any websites that are good for the Mexican P-47's (or any sold to South and Central America)?Thanks, John Yes, the Mexican P-47 were in fact D-30´s with compressability flaps, and the gunsight was the MK-VIII One more thing, if you plan to build the configuration from the machines that saw action in the Philipines you´ll need to paint the cockpit in dark gull green, but if you plan to build the post-war configuration, paint the cockpit in yellow zinc chromate, this is because the jugs from the war stayed in the Philipines, and after the war the Mexican air force received brand new machines. Hope this helps. Edited September 9, 2008 by top-aztec Quote Link to post Share on other sites
timc Posted September 9, 2008 Share Posted September 9, 2008 Yes, the Mexican P-47 were in fact D-30´s with compressability flaps, and the gunsight was the MK-VIII One more thing, if you plan to build the configuration from the machines that saw action in the Philipines you´ll need to paint the cockpit in dark gull green, but if you plan to build the post-war configuration, paint the cockpit in yellow zinc chromate, this is because the jugs from the war stayed in the Philipines, and after the war the Mexican air force received brand new machines. Hope this helps. Whoah, hold on there a minute! The only P-47D's that had cockpit colors other than the Dull Dark Green were the P-47G's built by Curtiss and they used interior green. All of them being used as stateside trainers. I don't even think Evansville built jugs had interior green cockpits...I believe they were all dull dark green. If you've got photographic eveidence of a P-47D with a yellow zinc cockpit, it's a rebuilt aircraft and not original issue from Republic Aviation. Initially, P-47D-30 RE and RA were not equipped from the factory with the stability fin on the vertical stab/fuselage. It was added during the production run and retrofitted to some in the field. You will see P-47D-30's without the stability fin. Glenn Eagleson's aircraft is a prime example of a D-30 without the fin. The fin was not standarized until the D-40 along with the K-14 gunsight and eventually the zero length rocket launchers. Tim Quote Link to post Share on other sites
Jennings Posted September 11, 2008 Share Posted September 11, 2008 AFAIK, plain yellow zinc chromate was never authorized for use in crew areas (as a primary color). I've surely never heard of it in any Jug cockpit. Many post-war Jugs apparently had black cockpits. J Quote Link to post Share on other sites
Scooby Posted September 11, 2008 Share Posted September 11, 2008 I thought the instrument panel decal in the -M kit is different from the -D kit. Nope, the M kit has both. It has all the parts to make an M and a D. The only kit I would consider buying is the M since it is so versatile. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.