Eric B. Posted November 3, 2019 Share Posted November 3, 2019 On 11/1/2019 at 1:43 PM, picknpluck said: Got mine finished up. It looks really good. Well weathered... Congratulations Eric B. Quote Link to post Share on other sites
Mstor Posted November 22, 2019 Share Posted November 22, 2019 Luckymodel is advertising the GWH 1/72 F-14A kit now and have it for preorder. Has decals for the early VF-1 scheme and includes the early style boat tail. I hope they do the same for the 1/48 version. Quote Link to post Share on other sites
Anders_Isaksson Posted December 2, 2019 Share Posted December 2, 2019 On 11/22/2019 at 8:35 AM, Mstor said: Luckymodel is advertising the GWH 1/72 F-14A kit now and have it for preorder. Has decals for the early VF-1 scheme and includes the early style boat tail. I hope they do the same for the 1/48 version. Hmm... so no signs of the later style beaver tail and gun vent in the upcoming F-14A? Well, perhaps more releases are on the way. Quote Link to post Share on other sites
B.Sin Posted December 2, 2019 Share Posted December 2, 2019 On 11/22/2019 at 2:35 AM, Mstor said: Luckymodel is advertising the GWH 1/72 F-14A kit now and have it for preorder. Has decals for the early VF-1 scheme and includes the early style boat tail. I hope they do the same for the 1/48 version. Anyone know when GWH will release their 1/48th scale one? Quote Link to post Share on other sites
Laurent Posted December 2, 2019 Share Posted December 2, 2019 4 hours ago, B.Sin said: Anyone know when GWH will release their 1/48th scale one? I'm not sure GWH knows. Quote Link to post Share on other sites
Mstor Posted December 3, 2019 Share Posted December 3, 2019 7 hours ago, Anders_Isaksson said: Hmm... so no signs of the later style beaver tail and gun vent in the upcoming F-14A? Well, perhaps more releases are on the way. There are two marking schemes provided. The VF-1 scheme with the original beaver tail and seven opening gun vent and a VF-41 scheme with a later boat tail but the same seven opening gun vent. I have found no close up pics of the parts sprues so don't know if there is a later style gun vent part. They've only shown a diagram of all the sprues. There a number of parts marked as not used. Perhaps there is a newer gun vent there. Will have to wait until more info is released. Quote Link to post Share on other sites
picknpluck Posted December 3, 2019 Share Posted December 3, 2019 The F-14D comes with this gun vent in addition to the NACA vent. I'm told by the Tomcat gurus that this vent is incorrect for any variant. Quote Link to post Share on other sites
Darren Roberts Posted December 3, 2019 Share Posted December 3, 2019 58 minutes ago, picknpluck said: The F-14D comes with this gun vent in addition to the NACA vent. I'm told by the Tomcat gurus that this vent is incorrect for any variant. You have been told correctly. The standard gun vent as seen above shouldn't have the grill at the rear. That only goes with the NACA vents. Quote Link to post Share on other sites
Solo Posted December 3, 2019 Share Posted December 3, 2019 7 hours ago, picknpluck said: The F-14D comes with this gun vent in addition to the NACA vent. So strange, my F-14D has quite different part: Quote Link to post Share on other sites
Anders_Isaksson Posted December 3, 2019 Share Posted December 3, 2019 6 hours ago, Darren Roberts said: You have been told correctly. The standard gun vent as seen above shouldn't have the grill at the rear. That only goes with the NACA vents. Indeed so. Some filler and sanding necessary, but looks doable. Btw, that mid style gun vent looks a wee bit soft in detail compared to, say, Hasegawa. 6 minutes ago, Solo said: So strange, my F-14D has quite different part: Perhaps your box has two similar sprues with a part for the gun vent? Quote Link to post Share on other sites
Solo Posted December 3, 2019 Share Posted December 3, 2019 That is right, there is one more sprue with such part: Quote Link to post Share on other sites
ChesshireCat Posted December 5, 2019 Share Posted December 5, 2019 On 7/12/2019 at 2:06 PM, Darren Roberts said: I like how they handled the boat tail and engine shrouds for different variants. That's a novel approach if the fit is good. All I want to know is if I can build a 1975 Tomcat with it. As for the wing issue, there are several Fujimi Tomcats buried away in my stash! Gary Quote Link to post Share on other sites
ChesshireCat Posted December 5, 2019 Share Posted December 5, 2019 On 7/22/2019 at 9:34 AM, ghatherly said: I would suggest that you contact them and point out the issues you have. Most all of the companies farm out the Decal Art work, ( I know GWH did this for the F-15 series). to private parties and don't get into the details as you do. They may very well do as you mention, but you will never know if you don't ask. It may save you lots of unnecessary aggravation. GH PS: I really like you stuff! Did he copyright his art work? If so, I'd make them pay thru the nose! Gary Quote Link to post Share on other sites
wm_cheng Posted May 19, 2020 Share Posted May 19, 2020 How is this GWH kit compared to the Fine Molds kit? Its so much more expensive, and I already have both the Fine Molds kits, would I be missing out on this or is this GWH substantially better than FM? I do love the early VF-1 Wolfpack scheme though. Quote Link to post Share on other sites
B.Sin Posted May 19, 2020 Share Posted May 19, 2020 When's the 1/48th scale coming out? Quote Link to post Share on other sites
Solo Posted May 19, 2020 Share Posted May 19, 2020 10 hours ago, wm_cheng said: How is this GWH kit compared to the Fine Molds kit? Difficult question. I think GWH is a little bit better kit, but FM has few advantages. Both has got very good panel lines, subtle and thin and beautiful details. GWH left, MF right. Quote Link to post Share on other sites
Laurent Posted May 19, 2020 Share Posted May 19, 2020 (edited) 17 hours ago, wm_cheng said: How is this GWH kit compared to the Fine Molds kit? I've read in another forum that there's something off in the wingtips of the Fine Molds kit. I've overlayed a Grumman drawings with scans of the FM and GWH wing. <deleted pics> Edited May 19, 2020 by Laurent Quote Link to post Share on other sites
wm_cheng Posted May 19, 2020 Share Posted May 19, 2020 Thanks @Solo - very clear, looks like I can't miss the GWH version especially their VF-1 Wolfpack now, its just so expensive for a 1/72 scale kit. Hard now to think I would ever build my Hasegawa stash 😞 @Laurent Thanks, but I can't actually see the JPGs - I don't think the attachment got posted. Quote Link to post Share on other sites
Laurent Posted May 19, 2020 Share Posted May 19, 2020 22 minutes ago, wm_cheng said: Thanks, but I can't actually see the JPGs - I don't think the attachment got posted. They got posted as I can see them on my phone also. Try copy-pasting the URL. Quote Link to post Share on other sites
wm_cheng Posted May 19, 2020 Share Posted May 19, 2020 42 minutes ago, Laurent said: They got posted as I can see them on my phone also. Try copy-pasting the URL. Can't find the URL - this is what I see; GWH grummanVsGWH.jpg FM grummanVsFM.jpg Its just text, I can't click on them or right click to reveal any URL - sorry I'm kind of new at this. Hmm, if I right click, there's a "reload image" - when I do that, it gives a blank space below the words but no image still. Am I the only one that can't see the image? I've tried on both Firefox and Chrome and turned off my AdBlock Plus and its still the same. Quote Link to post Share on other sites
Laurent Posted May 19, 2020 Share Posted May 19, 2020 (edited) 58 minutes ago, wm_cheng said: Can't find the URL - this is what I see; GWH grummanVsGWH.jpg FM grummanVsFM.jpg Its just text, I can't click on them or right click to reveal any URL - sorry I'm kind of new at this. Hmm, if I right click, there's a "reload image" - when I do that, it gives a blank space below the words but no image still. Am I the only one that can't see the image? I've tried on both Firefox and Chrome and turned off my AdBlock Plus and its still the same. Weird. These are just the names of the files. I'll host on Imgur. GWH Fine Molds Bonus... Academy Edited May 19, 2020 by Laurent Quote Link to post Share on other sites
wm_cheng Posted May 20, 2020 Share Posted May 20, 2020 Thanks @Laurent - man I didn't know the FM was that far off. Damn, I loved those kits. I guess if I don't start building my stash, I'll never get to any of them as something better keeps coming along to supplant them (I don't even want to build any of my Hasegawas now). Quote Link to post Share on other sites
Solo Posted May 20, 2020 Share Posted May 20, 2020 @Laurent, nice comparison. What about another: maybe shape of fuselage? I wonder who made the most accurate shape of that bird. Quote Link to post Share on other sites
Laurent Posted May 20, 2020 Share Posted May 20, 2020 11 hours ago, Solo said: @Laurent, nice comparison. What about another: maybe shape of fuselage? I wonder who made the most accurate shape of that bird. There would be too much optical distortion. I didn't post yet but given that the drawings of the painting instructions are probably standard views of the CAD model, I've overlayed these to the Grumman drawings. Too late to post. Quote Link to post Share on other sites
Laurent Posted May 21, 2020 Share Posted May 21, 2020 (edited) There seems to be two categories of kits in terms of profile of the front fuselage: 1) deep: distance between the fuselage bottom and top canopy is bigger than in the Grumman drawings. Hasegawa... Fine Molds... Since Fine Molds was founded by former Hasegawa employees AFAIK, similar reference material may have been used. 2): slim: canopy curve and bottom fuselage match the Grumman drawings. Academy... GWH... The match between the Grumman drawing and the GWH profile is particularly tight. Same thing in top view... Edited May 21, 2020 by Laurent Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.