nightiemission

The Rm P-61 kit can be built in various versions, just do a bit of research on the one(s) you want to build. Also, if you are building the RM P-61 kit, if you haven't already read it, read my pinned article here on ARC on building tips for the RM P-61. If anyone runs into issues during the build, feel free to e-mail me.

The RM P-61 kit can be built as several variant of the '61- - actually too many to list here.

I have a hunch that there will be a number of P-61s in this GB.- - -Not complaining! Can't have too many P-61s!

The Landing took place at Minden, Nevada. Not someplace in California. If I remember right, he developed the gear problem someplace else and decide to take it home where they had what was needed to repair it. That was about the time tha Neptune Aviation aquired the BAE-146s and the P-2 has never been repaired.

Be careful of the TD Props for the B-29, they're a scale foot too short.

The silver F7F is Rod Lewis' "La Patrona"/"Big Boss Man". It's a yearly compeditor at the Reno Air Races.

There are quite a number of C-47s in museums. I don't see why they shouldn't put her back in the air. C-47s(and all other aircraft) were built to fly. Besides, C-47s are not that rare.

Should never have been that close to start with. Also, the Mercy should not have been using her own power at the time.(Unless she has a really, really shallow draft and I don't think she does. Nimitz class carriers do not use their own propulsion to move with in the harbor. The tugs pick them up about half way in the channel. Either the harbor pilot, the tug skippers are probably in deep doo-doo, maybe all of them including the Mercy's skipper are. If not, they should be. No excuse for getting that close to Arizona. Cheers, Terry

If you haven't read it, try the pinned article on building the Rm P-61 kit. It may be of some help. Also, I have built the GWH kit. While it does have it's own issues, the fit of this kit is far better than the RM kit but, way more expensive. The Hobby Boss kit has major shape issues around the turret area that would take a lot of work to correct. IMHO, go with either the Rm or the GWH kits. Cheers, Terry (Certifiable P-61 NUT!!)

Count me in! Don't know yet what I will build. I do have a fair number of vacs in my stash. Hopefully, I'll be able to find the time to actually finish a model in time! Cheers, Terry

Like you, I've built a bunch of RM P-61's(10,8 for myself), one GWH kit completed puls another 4-5 RM kits is various stages of completion. SO, there's not much I can tell you about the RM kit you don't already know. The GWH kit, while much higher in price has outstanding overall fit but has it's own share of errors and quirks. The nose gear strut is way too short(there is a metal replacement set available for it) The control wheel is fully twice the size it should be(I'd replace it with one from an RM kit) and is placed too far forward as is the instrument panel, both are easy fixes, though.

That works for me. I'm in with at least two. Cheers, Terry

No, you would not use that piece. That area is about where the turret(if installed) would be. Hope this helps, Terry (certifiable P-61 NUT!!)

Hey Steve, If you happen to come through Klamath Falls, give me a buzz and I'll meet you somewhere for coffee. PM me and I''l send you my phone numbers. Cheers, Terry

That wasn't a Huskie, it was a Ch-34.